Add initial pack contents

.ci/README.md

@@ -0,0 +1,7 @@
+# Continuous Integration (CI) Test for Board Support Pack (BSP)
+
+Content of `.ci` Directory   | Description
+:----------------------------|:-----------------
+`vcpkg-configuration.json`   | Tool setup for the CI test
+
+The [GitHub Actions](https://github.com/Open-CMSIS-Pack/ST_NUCLEO-WL55JC_BSP/tree/main/README.md#github-actions) in the directory [`.github/workflows`](https://github.com/Open-CMSIS-Pack/ST_NUCLEO-WL55JC_BSP/tree/main/.github/workflows) are the scripts for the CI tests. These scripts contain detailed comments about each step that is executed.

.ci/vcpkg-configuration.json

@@ -0,0 +1,17 @@
+{
+    "registries": [
+        {
+            "name": "arm",
+            "kind": "artifact",
+            "location": "https://artifacts.tools.arm.com/vcpkg-registry"
+        }
+    ],
+    "requires": {
+        "arm:tools/open-cmsis-pack/cmsis-toolbox": "^2.6.0",
+        "arm:tools/arm/mdk-toolbox":" ^1.0.0",
+        "arm:tools/kitware/cmake": "^3.28.4",
+        "arm:tools/ninja-build/ninja": "^1.12.0",
+        "arm:compilers/arm/armclang": "^6.22.0",
+        "arm:compilers/arm/arm-none-eabi-gcc": "^13.3.1"
+    }
+}

.github/workflows/Test-Examples.yml

@@ -0,0 +1,81 @@
+name: Test-Examples   # BSP Examples
+on:
+  workflow_dispatch:
+  pull_request:
+    branches: [main]
+  push:
+    branches: [main]
+  schedule:
+    - cron: '00 20 * * 6'
+
+jobs:
+  Test-Examples:                     # Install tools, build
+    strategy:
+      fail-fast: false
+
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout .ci folder
+        uses: actions/checkout@v4
+        with:
+          sparse-checkout: |
+            .ci
+
+      - name: Install tools
+        uses: ARM-software/cmsis-actions/vcpkg@v1
+        with:
+          config: "./.ci/vcpkg-configuration.json"
+
+      - name: Activate Arm tool license
+        uses: ARM-software/cmsis-actions/armlm@v1
+
+      - name: Checkout current repository
+        uses: actions/checkout@v4
+        with:
+          path: ./BSP
+
+      - name: Checkout STM32WLxx_DFP
+        uses: actions/checkout@v4
+        with:
+          repository: Open-CMSIS-Pack/STM32WLxx_DFP
+          path: ./DFP
+
+      - name: Checkout CMSIS-Driver_STM32
+        uses: actions/checkout@v4
+        with:
+          repository: Open-CMSIS-Pack/CMSIS-Driver_STM32
+          path: ./Drivers
+
+      - name: Initialize CMSIS pack root folder
+        run: |
+          cpackget init https://www.keil.com/pack/index.pidx
+          cpackget update-index
+
+      - name: Add local CMSIS packs
+        run: |
+          cpackget add ./BSP/Keil.NUCLEO-WL55JC_BSP.pdsc
+          cpackget add ./DFP/Keil.STM32WLxx_DFP.pdsc
+          cpackget add ./Drivers/ARM.CMSIS-Driver_STM32.pdsc
+
+      - name: Copy Blinky example to CI/Examples/ folder
+        working-directory: ./
+        run: |
+          mkdir -p ./CI/Examples/Blinky
+          cp -rf ./BSP/Examples/Blinky/* ./CI/Examples/Blinky/
+
+      - name: Build Blinky AC6
+        if: always()
+        working-directory: ./CI/Examples/Blinky
+        run: |
+          cbuild ./Blinky.csolution.yml --packs --update-rte --packs --toolchain AC6 --rebuild
+
+      - name: Upload Artifact of the Blinky AC6 build
+        if: always()
+        uses: actions/upload-artifact@v4
+        with:
+          name: Blinky_AC6
+          path: |
+            ./CI/Examples/Blinky/
+            !./CI/Examples/Blinky/tmp/
+          retention-days: 1

.github/workflows/pack.yml

@@ -0,0 +1,33 @@
+name: Build pack
+on:
+  workflow_dispatch:
+  pull_request:
+  push:
+    branches: [main]
+  release:
+    types: [published]
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  pack:
+    name: Generate pack
+    runs-on: ubuntu-22.04
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+
+      - name: Fetch tags
+        if: github.event_name == 'release'
+        run: |
+          git fetch --tags --force
+
+      - uses: Open-CMSIS-Pack/gen-pack-action@main
+        with:
+          doxygen-version: none
+          packchk-version: 1.4.1
+          gen-pack-script: ./gen_pack.sh
+          gen-pack-output: ./output

.gitignore

@@ -0,0 +1,3 @@
+# Pack build files
+/build/
+/output/

CMSIS/Driver/vio_NUCLEO-WL55JC.c

@@ -0,0 +1,235 @@
+/******************************************************************************
+ * @file     vio_NUCLEO-WL55JC.c
+ * @brief    Virtual I/O implementation for board NUCLEO-WL55JC
+ * @version  V1.0.0
+ * @date     21. October 2024
+ ******************************************************************************/
+/*
+ * Copyright (c) 2024 Arm Limited (or its affiliates).
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*! \page vio_NUCLEO-WL55JC Physical I/O Mapping
+
+The table below lists the physical I/O mapping of this CMSIS-Driver VIO implementation.
+
+| Virtual I/O   | Variable       | Board component      | Pin
+|:--------------|:---------------|:---------------------|:------
+| vioBUTTON0    | vioSignalIn.0  | USER button (B1)     | PA0
+| vioLED0       | vioSignalOut.0 | LED red     (LED3)   | PB11
+| vioLED1       | vioSignalOut.1 | LED green   (LED2)   | PB9
+| vioLED2       | vioSignalOut.2 | LED blue    (LED1)   | PB15
+*/
+
+#include "cmsis_vio.h"
+
+#include "RTE_Components.h"                     // Component selection
+#include CMSIS_device_header
+
+#if !defined CMSIS_VOUT || !defined CMSIS_VIN
+#include "GPIO_STM32.h"
+#endif
+
+// VIO input, output definitions
+#ifndef VIO_VALUE_NUM
+#define VIO_VALUE_NUM           5U              // Number of values
+#endif
+
+// VIO input, output variables
+static uint32_t vioSignalIn             __USED; // Memory for incoming signal
+static uint32_t vioSignalOut            __USED; // Memory for outgoing signal
+static int32_t  vioValue[VIO_VALUE_NUM] __USED; // Memory for value used in vioGetValue/vioSetValue
+
+#if !defined CMSIS_VOUT || !defined CMSIS_VIN
+
+// VIO Active State
+#define VIO_ACTIVE_LOW          0U
+#define VIO_ACTIVE_HIGH         1U
+
+typedef struct {
+  uint32_t vioSignal;
+  uint16_t pin;
+  uint8_t  pullResistor;
+  uint8_t  activeState;
+} pinCfg_t;
+
+#if !defined CMSIS_VOUT
+// VOUT Configuration
+static const pinCfg_t outputCfg[] = {
+//  signal,     pin,                   pull resistor,      active state
+  { vioLED0,    GPIO_PIN_ID_PORTB(11), ARM_GPIO_PULL_NONE, VIO_ACTIVE_HIGH },
+  { vioLED1,    GPIO_PIN_ID_PORTB(9),  ARM_GPIO_PULL_NONE, VIO_ACTIVE_HIGH },
+  { vioLED2,    GPIO_PIN_ID_PORTB(15), ARM_GPIO_PULL_NONE, VIO_ACTIVE_HIGH }
+};
+#endif
+
+#if !defined CMSIS_VIN
+// VIN Configuration
+static const pinCfg_t inputCfg[] = {
+//  signal,     pin,                   pull resistor,      active state
+  { vioBUTTON0, GPIO_PIN_ID_PORTA(0),  ARM_GPIO_PULL_UP,   VIO_ACTIVE_LOW }
+};
+#endif
+
+// External GPIO Driver
+extern ARM_DRIVER_GPIO Driver_GPIO0;
+static ARM_DRIVER_GPIO *pGPIODrv = &Driver_GPIO0;
+#endif
+
+// Initialize test input, output.
+void vioInit (void) {
+  uint32_t n;
+#if !defined(CMSIS_VOUT) || !defined(CMSIS_VIN)
+  ARM_GPIO_Pin_t pin;
+#endif
+
+  vioSignalIn  = 0U;
+  vioSignalOut = 0U;
+
+  for (n = 0U; n < VIO_VALUE_NUM; n++) {
+    vioValue[n] = 0U;
+  }
+
+#if !defined CMSIS_VOUT
+  for (n = 0U; n < (sizeof(outputCfg) / sizeof(pinCfg_t)); n++) {
+    pin = (ARM_GPIO_Pin_t)outputCfg[n].pin;
+    pGPIODrv->Setup(pin, NULL);
+    pGPIODrv->SetOutputMode(pin, ARM_GPIO_PUSH_PULL);
+    pGPIODrv->SetPullResistor(pin, outputCfg[n].pullResistor);
+    pGPIODrv->SetDirection(pin, ARM_GPIO_OUTPUT);
+
+    // Set initial pin state to inactive
+    if (outputCfg[n].activeState == VIO_ACTIVE_HIGH) {
+      pGPIODrv->SetOutput(pin, 0U);
+    } else {
+      pGPIODrv->SetOutput(pin, 1U);
+    }
+  }
+#endif
+
+#if !defined CMSIS_VIN
+  for (n = 0U; n < (sizeof(inputCfg) / sizeof(pinCfg_t)); n++) {
+    pin = (ARM_GPIO_Pin_t)inputCfg[n].pin;
+    pGPIODrv->Setup(pin, NULL);
+    pGPIODrv->SetPullResistor(pin, inputCfg[n].pullResistor);
+    pGPIODrv->SetDirection(pin, ARM_GPIO_INPUT);
+  }
+#endif
+}
+
+// Set signal output.
+void vioSetSignal (uint32_t mask, uint32_t signal) {
+#if !defined CMSIS_VOUT
+  ARM_GPIO_Pin_t pin;
+  uint32_t pinValue, n;
+#endif
+
+  vioSignalOut &= ~mask;
+  vioSignalOut |=  mask & signal;
+
+#if !defined CMSIS_VOUT
+  // Output signals to LEDs
+  for (n = 0U; n < (sizeof(outputCfg) / sizeof(pinCfg_t)); n++) {
+    pin = (ARM_GPIO_Pin_t)outputCfg[n].pin;
+    if ((mask & outputCfg[n].vioSignal) != 0U) {
+      if ((signal & outputCfg[n].vioSignal) != 0U) {
+        pinValue = 1U;
+      } else {
+        pinValue = 0U;
+      }
+      if (pinValue == outputCfg[n].activeState) {
+        pGPIODrv->SetOutput(pin, 1U);
+      } else {
+        pGPIODrv->SetOutput(pin, 0U);
+      }
+    }
+  }
+#endif
+}
+
+// Get signal input.
+uint32_t vioGetSignal (uint32_t mask) {
+  uint32_t signal;
+#if !defined CMSIS_VIN
+  ARM_GPIO_Pin_t pin;
+  uint32_t pinValue, n;
+#endif
+
+#if !defined CMSIS_VIN
+  // Get input signals from buttons
+  for (n = 0U; n < (sizeof(inputCfg) / sizeof(pinCfg_t)); n++) {
+    pin = (ARM_GPIO_Pin_t)inputCfg[n].pin;
+    if ((mask & inputCfg[n].vioSignal) != 0U) {
+      pinValue = pGPIODrv->GetInput(pin);
+      if (pinValue == inputCfg[n].activeState) {
+        vioSignalIn |=  inputCfg[n].vioSignal;
+      } else {
+        vioSignalIn &= ~inputCfg[n].vioSignal;
+      }
+    }
+  }
+#endif
+
+  signal = vioSignalIn & mask;
+
+  return signal;
+}
+
+// Set value output.
+//   Note: vioAOUT not supported.
+void vioSetValue (uint32_t id, int32_t value) {
+  uint32_t index = id;
+#if !defined CMSIS_VOUT
+// Add user variables here:
+
+#endif
+
+  if (index >= VIO_VALUE_NUM) {
+    return;                             /* return in case of out-of-range index */
+  }
+
+  vioValue[index] = value;
+
+#if !defined CMSIS_VOUT
+// Add user code here:
+
+#endif
+}
+
+// Get value input.
+//   Note: vioAIN not supported.
+int32_t vioGetValue (uint32_t id) {
+  uint32_t index = id;
+  int32_t  value;
+#if !defined CMSIS_VIN
+// Add user variables here:
+
+#endif
+
+  if (index >= VIO_VALUE_NUM) {
+    return 0U;                          /* return 0 in case of out-of-range index */
+  }
+
+#if !defined CMSIS_VIN
+// Add user code here:
+
+#endif
+
+  value = vioValue[index];
+
+  return value;
+}

Documents/OVERVIEW.md

@@ -0,0 +1,11 @@
+# NUCLEO-WL55JC_BSP
+
+The **STMicroelectronics NUCLEO-WL55JC Board Support Pack (BSP)**:
+
+- Contains examples in *csolution format* for usage with the [CMSIS-Toolbox](https://github.com/Open-CMSIS-Pack/cmsis-toolbox/blob/main/docs/README.md) and the  [VS Code CMSIS Solution](https://marketplace.visualstudio.com/items?itemName=Arm.cmsis-csolution) extension.
+- Requires the [Device Family Pack (DFP) for the STM32WL series](https://www.keil.arm.com/packs/stm32wlxx_dfp-keil).
+- Is configured with [STM32CubeMX](https://www.st.com/en/development-tools/stm32cubemx.html) for the Arm Compiler 6 (MDK).
+
+## Content in *csolution format*
+
+- [Examples/Blinky](https://github.com/Open-CMSIS-Pack/ST_NUCLEO-WL55JC_BSP/tree/main/Examples/Blinky) shows the basic usage of this board.