Fix bug #948: make HIGH/LOW-VALUE sensitive to program collating sequence #70

Workflow file for this run

.github/workflows/build_nightly.yml at 06e91c9

	name: Build, Test and provide Nightly (Ubuntu + MSYS1)

	on:

	pull_request:
	branches: [ gcos4gnucobol-3.x ]
	push:
	# manual run in actions tab - for all branches
	workflow_dispatch:


	jobs:

	build:
	name: Build, test and provide nightly
	strategy:
	fail-fast: false
	matrix:
	os: [ubuntu-latest]
	runs-on: ${{ matrix.os }}

	steps:
	- name: Install packages
	run: \|
	sudo apt -y update
	sudo apt -y install automake libtool libdb5.3-dev libxml2-dev libcjson-dev \
	bison flex help2man gettext texlive

	- name: Set git user
	run: \|
	git config --global user.name github-actions
	git config --global user.email [email protected]

	- name: Checkout code
	uses: actions/checkout@v4

	- name: Bootstrap
	run: \|
	./build_aux/bootstrap

	# FIXME: With TERM="dumb" `make check` fails with:
	# ...
	# 571: ACCEPT OMITTED (SCREEN) FAILED (run_accept.at:307)
	# ...
	# 693: ON EXCEPTION clause of DISPLAY FAILED (run_misc.at:6335)
	# 695: LINE/COLUMN 0 exceptions FAILED (run_misc.at:6414)
	# 694: EC-SCREEN-LINE-NUMBER and -STARTING-COLUMN FAILED (run_misc.at:6376)
	# ...
	# Failure cases read: "Error opening terminal: unknown." on
	# stderr, and exit with code 1.
	#
	# Another alternative is passing `--with-curses=no` to the
	# configure script, yet distcheck does call configure too...
	#
	- name: Build environment setup
	run: \|
	mkdir _build
	export TERM="vt100"
	echo "TERM=$TERM" >> $GITHUB_ENV

	- name: Configure
	run: \|
	cd _build
	../configure --enable-cobc-internal-checks \
	--enable-hardening \
	--prefix /opt/gnucobol3 \
	--with-pkgversion="GnuCOBOL CI"
	echo "VERSION=PACKAGE_VERSION" \| cpp -P -imacros config.h \| tr -d \" \
	>> $GITHUB_ENV

	- name: Build
	run: \|
	make -C _build --jobs=$(($(nproc)+1))

	- name: Upload config.log
	uses: actions/upload-artifact@v4
	if: failure()
	with:
	name: config-${{ matrix.os }}-${{ github.job }}.log
	path: _build/config.log

	# note: distcheck also creates the dist tarball
	- name: Build distribution archive & run tests
	run: \|
	make -C _build distcheck \
	TESTSUITEFLAGS="--jobs=$(($(nproc)+1))" \
	--jobs=$(($(nproc)+1)) \|\| \
	make -C _build/gnucobol-$VERSION/_build/sub/tests check \
	TESTSUITEFLAGS="--recheck --verbose"
	make -C _build --jobs=$(($(nproc)+1)) dist DIST_TARGETS="dist-gzip distwin-zip"
	make -C _build --jobs=$(($(nproc)+1)) distbin DISTBIN_TARGETS="distbin-xz"

	- name: Upload testsuite.log
	if: ${{ ! cancelled() }} #-> always upload as build result documentation
	uses: actions/upload-artifact@v4
	with:
	# Assume there's only one directory matching `build/gnucobol-*`:
	name: testsuite-${{ matrix.os }}-${{ github.job }}.log
	path: _build/gnucobol-${{ env.VERSION }}/_build/sub/tests/testsuite.log

	- name: Upload dist tarball
	uses: actions/upload-artifact@v4
	with:
	name: gnucobol-ci source distribution
	path: _build/gnucobol*.tar.gz
	if-no-files-found: error
	retention-days: 0

	- name: Upload dist tarball
	uses: actions/upload-artifact@v4
	with:
	name: gnucobol-ci windows source distribution
	path: _build/gnucobol*.zip
	if-no-files-found: error
	retention-days: 0

	- name: Upload test binaries
	uses: actions/upload-artifact@v4
	with:
	name: gnucobol-ci binary distribution
	path: _build/gnucobol*.tar.xz
	if-no-files-found: error
	retention-days: 0

	- name: Cache newcob.val
	uses: actions/cache@v4
	with:
	path: _build/tests/cobol85/newcob.val
	key: newcob-val
	save-always: true
	enableCrossOsArchive: true

	- name: NIST85 Test Suite
	run: \|
	make -C _build/tests/cobol85 EXEC85 test \
	--jobs=$(($(nproc)+1))

	- name: Upload NIST85 Test Suite results
	uses: actions/upload-artifact@v4
	with:
	name: NIST85 results on ${{ matrix.os }}-${{ github.job }}
	path: \|
	_build/tests/cobol85/summary.*
	_build/tests/cobol85/*/.log
	_build/tests/cobol85/*/.out
	_build/tests/cobol85/**/duration.txt

	minmal_build:
	name: Build and test with minimal dependencies
	strategy:
	fail-fast: true
	matrix:
	os: [ubuntu-latest]
	needs: build
	runs-on: ${{ matrix.os }}

	steps:

	- name: Install packages
	run: \|
	sudo apt -y update
	sudo apt -y install build-essential libgmp-dev
	sudo apt -y remove bison flex

	- name: Get CI dist tarball
	uses: actions/download-artifact@v4
	with:
	name: gnucobol-ci source distribution

	- name: Build environment setup
	run: \|
	tar -xvf gnucobol.tar. --strip-components=1
	mkdir _build

	- name: Configure
	run: \|
	cd _build
	../configure --disable-dependency-tracking \
	--without-db --without-curses \
	--without-xml2 --without-json \
	--without-iconv --disable-nls

	- name: Build
	run: \|
	make -C _build --jobs=$(($(nproc)+1))

	- name: Upload config.log
	if: failure()
	uses: actions/upload-artifact@v4
	with:
	name: config-${{ matrix.os }}-${{ github.job }}.log
	path: _build/config.log

	- name: run internal tests
	run: \|
	make -C _build check TESTSUITEFLAGS="--jobs=$(($(nproc)+1))" \|\| \
	make -C _build check TESTSUITEFLAGS="--recheck --verbose"

	- name: Upload testsuite.log
	if: ${{ ! cancelled() }} #-> always upload as build result documentation
	uses: actions/upload-artifact@v4
	with:
	name: testsuite-${{ matrix.os }}-${{ github.job }}.log
	path: _build/tests/testsuite.log

	- name: Cache newcob.val
	uses: actions/cache@v4
	with:
	path: _build/tests/cobol85/newcob.val
	key: newcob-val
	save-always: true
	enableCrossOsArchive: true

	- name: NIST85 Test Suite
	run: \|
	make -C _build/tests/cobol85 EXEC85 test \
	--jobs=$(($(nproc)+1))

	- name: Upload NIST85 Test Suite results
	if: ${{ ! cancelled() }} #-> always upload as build result documentation
	uses: actions/upload-artifact@v4
	with:
	name: NIST85 results on ${{ matrix.os }}-${{ github.job }}
	path: \|
	_build/tests/cobol85/summary.*
	_build/tests/cobol85/*/.log
	_build/tests/cobol85/*/.out
	_build/tests/cobol85/**/duration.txt


	coverage:
	name: Coverage and Warnings
	needs: build
	runs-on: ubuntu-latest

	steps:
	- name: Checkout code
	uses: actions/checkout@v4

	- name: Install dependencies
	run: \|
	sudo apt -y install libdb5.3-dev libxml2-dev libcjson-dev lcov

	- name: Get CI dist tarball
	uses: actions/download-artifact@v4
	with:
	name: gnucobol-ci source distribution

	- name: Build environment setup
	run: \|
	tar -xvf gnucobol.tar. --strip-components=1
	mkdir _build
	export TERM="vt100"
	echo "TERM=$TERM" >> $GITHUB_ENV

	# note: add additional C compiler syntax checks here to not need
	# _another_ CI run
	#
	# TODO: try and pass -pedantic via CPPFLAGS
	- name: Configure
	run: \|
	cd _build
	../configure --enable-code-coverage \
	--with-db --with-xml2 --with-json=cjson --with-curses=ncursesw \
	CPPFLAGS="-Werror=declaration-after-statement" \
	CC="gcc -std=c89"

	- name: Build
	run: \|
	make -C _build --jobs=$(($(nproc)+1))

	- name: Upload config.log
	if: failure()
	uses: actions/upload-artifact@v4
	with:
	name: config-${{ github.job }}.log
	path: _build/config.log

	- name: Coverage
	run: \|
	# make -C _build check-code-coverage # <- (ignores errors)
	make -C _build check \
	TESTSUITEFLAGS="--jobs=$(($(nproc)+1))"
	make -C _build code-coverage-capture \
	CODE_COVERAGE_DIRECTORY="$(realpath .)/_build"

	- name: Upload testsuite.log
	if: ${{ ! cancelled() }} #-> always upload as build result documentation
	uses: actions/upload-artifact@v4
	with:
	name: testsuite-${{ github.job }}.log
	path: _build/tests/testsuite.log

	- name: Upload coverage report
	uses: actions/upload-artifact@v4
	with:
	name: coverage
	path: _build/GnuCOBOL-**-coverage

	- name: Cache newcob.val
	uses: actions/cache@v4
	with:
	path: _build/tests/cobol85/newcob.val
	key: newcob-val
	save-always: true
	enableCrossOsArchive: true

	- name: Extended coverage
	run: \|
	make -C _build/tests/cobol85 EXEC85 test \
	--jobs=$(($(nproc)+1)) \
	--keep-going
	make -C _build code-coverage-capture \
	CODE_COVERAGE_OUTPUT_DIRECTORY=extended-coverage \
	CODE_COVERAGE_OUTPUT_FILE=extended-coverage.info \
	CODE_COVERAGE_DIRECTORY="$(realpath .)/_build"

	- name: Upload extended coverage report
	uses: actions/upload-artifact@v4
	with:
	name: extended-coverage
	path: _build/extended-coverage

	- name: Upload coverage to codecov
	uses: codecov/codecov-action@v3
	with:
	# token: ${{ secrets.CODECOV_TOKEN }} # not required for public repos
	directory: _build
	# Shall fail until we have a working account on codecov.io
	fail_ci_if_error: false # optional (default = false)
	verbose: true # optional (default = false)


	msys_build_test_createdist:

	needs: build
	runs-on: windows-latest
	timeout-minutes: 30

	env:
	MSYS_ROOT: C:\MinGW
	MSYS_BIN: C:\MinGW\msys\1.0\bin
	#BISON_PKGDATADIR: C:\MinGW\share\bison
	# M4: m4
	MSYSTEM: MINGW32
	MSYSPKGS: msys-m4 msys-coreutils msys-patch
	#MSYSPKGS: msys-m4 msys-flex msys-coreutils msys-help2man msys-bison msys-patch GC3 from VCS
	#MINGW_AUTOCONF_VERS: 2.7.0 # only needed to build from VCS, not from dist tarball
	#MINGW_BISON_VERS: bison-3.6 # minimal for GC 4.x+
	MINGW_GMP_VERS: gmp-6.3.0 # always update for performance reasons
	MINGW_BDB_VERS: db-6.0.19.NC
	MINGW_PDCM_VERS: 4.4.0
	MINGW_CJSON_VERS: 1.7.18
	MINGW_XML2_VERS: 2.8.0

	strategy:
	fail-fast: false
	matrix:
	target:
	- debug
	- release

	steps:

	- name: Get CI dist tarball
	uses: actions/download-artifact@v4
	with:
	name: gnucobol-ci source distribution

	- name: Build environment setup
	run: \|
	bash -lc "tar -xvf gnucobol.tar. --strip-components=1"
	mkdir _build

	- name: Setup environment
	run: \|
	echo GITHUB_WORKSPACE=$env:GITHUB_WORKSPACE >> $env:GITHUB_ENV
	echo HOME=$env:GITHUB_WORKSPACE >> $env:GITHUB_ENV
	echo PATH="$env:MSYS_BIN;$env:PATH" >> $env:GITHUB_ENV
	If ("${{ matrix.target }}" -eq "release") {
	echo DISTDIR=GnuCOBOL_mingw >> $env:GITHUB_ENV
	echo CFGOPT="--with-pkgversion=GnuCOBOL-CI-MSYS" >> $env:GITHUB_ENV
	} else {
	echo DISTDIR=GnuCOBOL_mingw_dbg >> $env:GITHUB_ENV
	echo CFGOPT="--with-pkgversion=GnuCOBOL-CI-MSYS-Debug --enable-debug --enable-cobc-internal-checks --enable-hardening" >> $env:GITHUB_ENV
	}

	- name: Restore MSYS1 cache
	id: restore-msys
	uses: actions/cache/restore@v4
	with:
	key: cache-msys
	path: ${{ env.MSYS_ROOT }}

	- name: Install MSYS1
	if: steps.restore-msys.outputs.cache-hit != 'true'
	run: \|
	curl -O https://www.arnoldtrembley.com/MinGW-bkup02.7z
	7z x -y MinGW-bkup02.7z -o${{ env.MSYS_ROOT }}\

	- name: Install MSYS1 packages
	if: steps.restore-msys.outputs.cache-hit != 'true'
	run: \|
	${{ env.MSYS_ROOT }}\bin\mingw-get install ${{ env.MSYSPKGS }}

	- name: Cleanup MSYS1 env
	if: steps.restore-msys.outputs.cache-hit != 'true'
	shell: cmd
	run: \|
	rmdir /Q /S ${{ env.MSYS_ROOT }}\docs
	rmdir /Q /S ${{ env.MSYS_ROOT }}\var
	del /Q ${{ env.MSYS_ROOT }}\bin\gdb*

	- name: Save MSYS1 cache
	if: steps.restore-msys.outputs.cache-hit != 'true'
	uses: actions/cache/save@v4
	with:
	key: cache-msys
	path: ${{ env.MSYS_ROOT }}


	# - name: Restore Bison cache
	# id: restore-bison
	# uses: actions/cache/restore@v4
	# with:
	# key: cache-msys-bison
	# path: ${{ env.MINGW_BISON_VERS }}

	# - name: Install Bison
	# if: steps.restore-bison.outputs.cache-hit != 'true'
	# run: \|
	# curl -L https://ftp.gnu.org/gnu/bison/%MINGW_BISON_VERS%.tar.gz -o %MINGW_BISON_VERS%.tar.gz
	# tar -xvf %MINGW_BISON_VERS%.tar.gz
	# bash -lc "cd %MINGW_BISON_VERS% && ./configure --prefix=/mingw && make"

	# - name: Install Bison
	# run: \|
	# bash -lc "make -C %MINGW_BISON_VERS% install"

	# - name: Save Bison cache
	# if: steps.restore-bison.outputs.cache-hit != 'true'
	# uses: actions/cache/save@v4
	# with:
	# key: cache-msys-bison
	# path: ${{ env.MINGW_BISON_VERS }}


	# - name: Restore Autoconf cache
	# id: restore-autoconf
	# uses: actions/cache/restore@v4
	# with:
	# key: cache-msys-autoconf
	# path: ${{ env.MINGW_BISON_VERS }}

	# - name: Install Autoconf 2.70
	# if: steps.restore-autoconf.outputs.cache-hit != 'true'
	# run: \|
	# curl -L https://ftpmirror.gnu.org/autoconf/%MINGW_AUTOCONF_VERS%.tar.gz -o %MINGW_AUTOCONF_VERS%.tar.gz
	# tar -xvzf %MINGW_AUTOCONF_VERS%.tar.gz
	# bash -lc "cd %MINGW_AUTOCONF_VERS% && ./configure"
	# bash -lc "cd %MINGW_AUTOCONF_VERS% && make"

	# - name: Install Autoconf
	# run: \|
	# bash -lc "cd %MINGW_AUTOCONF_VERS% && make install"

	# - name: Save Autoconf cache
	# if: steps.restore-autoconf.outputs.cache-hit != 'true'
	# uses: actions/cache/save@v4
	# with:
	# key: cache-msys-autoconf
	# path: ${{ env.MINGW_BISON_VERS }}


	- name: Restore GMP cache
	id: restore-gmp
	uses: actions/cache/restore@v4
	with:
	key: cache-msys-gmp
	path: ${{ env.MINGW_GMP_VERS }}

	- name: Build GMP
	if: steps.restore-gmp.outputs.cache-hit != 'true'
	shell: cmd
	run: \|
	rem note: MSYS1 cannot connect to https://gmplib.org, so using GNU mirror side instead
	curl -L https://ftp.gnu.org/gnu/gmp/${{ env.MINGW_GMP_VERS }}.tar.xz -o ${{ env.MINGW_GMP_VERS }}.tar.xz
	tar -xvf ${{ env.MINGW_GMP_VERS }}.tar.xz
	bash -lc "cd ${{ env.MINGW_GMP_VERS }} && ./configure --prefix=/mingw --enable-fat --enable-shared --disable-static CFLAGS=\"-Wno-attributes -Wno-ignored-attributes\" ABI=32 && make --jobs=$(($(nproc)+1))"

	- name: Install GMP
	run: \|
	bash -lc "make -C ${{ env.MINGW_GMP_VERS }} install"

	- name: Save GMP cache
	if: steps.restore-gmp.outputs.cache-hit != 'true'
	uses: actions/cache/save@v4
	with:
	key: cache-msys-gmp
	path: ${{ env.MINGW_GMP_VERS }}


	- name: Restore BDB cache
	id: restore-bdb
	uses: actions/cache/restore@v4
	with:
	key: cache-msys-bdb
	path: ${{ env.MINGW_BDB_VERS }}

	- name: Build BDB
	if: steps.restore-bdb.outputs.cache-hit != 'true'
	run: \|
	curl -L https://download.oracle.com/berkeley-db/${{ env.MINGW_BDB_VERS }}.tar.gz -o ${{ env.MINGW_BDB_VERS }}.tar.gz
	curl -L https://raw.githubusercontent.com/msys2/MINGW-packages/refs/heads/master/mingw-w64-db/0001-db-tls-m4-fix-pthread.patch -o db-tls-m4-fix-pthread.patch
	curl -L https://raw.githubusercontent.com/msys2/MINGW-packages/refs/heads/master/mingw-w64-db/mingw.patch -o mingw.patch
	curl -L https://raw.githubusercontent.com/msys2/MINGW-packages/refs/heads/master/mingw-w64-db/cclang_cxx_11.patch -o cx11.patch
	tar -xvf ${{ env.MINGW_BDB_VERS }}.tar.gz
	sed -i 's/_tcsclen/_mbslen/' ${{ env.MINGW_BDB_VERS }}\src\os_windows\os_stat.c
	bash -lc "cd ${{ env.MINGW_BDB_VERS }} && /bin/patch -p1 -i ../db-tls-m4-fix-pthread.patch"
	bash -lc "cd ${{ env.MINGW_BDB_VERS }} && /bin/patch -p1 -i ../mingw.patch"
	bash -lc "cd ${{ env.MINGW_BDB_VERS }} && /bin/patch -p1 -i ../cx11.patch"
	bash -lc "cd ${{ env.MINGW_BDB_VERS }}/build_unix && ../dist/configure --prefix=/mingw --enable-mingw --enable-debug --disable-static --disable-replication --disable-tcl --without-cryptography LIBCSO_LIBS=-lwsock32 && make --jobs=$(($(nproc)+1))"

	- name: Install BDB
	run: \|
	bash -lc "make -C ${{ env.MINGW_BDB_VERS }}/build_unix install"

	- name: Save BDB cache
	if: steps.restore-bdb.outputs.cache-hit != 'true'
	uses: actions/cache/save@v4
	with:
	key: cache-msys-bdb
	path: ${{ env.MINGW_BDB_VERS }}


	- name: Restore LibXML2 cache
	id: restore-xml2
	uses: actions/cache/restore@v4
	with:
	key: cache-msys-xml2
	path: libxml2-${{ env.MINGW_XML2_VERS }}

	- name: Build LibXML2
	if: steps.restore-xml2.outputs.cache-hit != 'true'
	run: \|
	curl -L https://github.com/GNOME/libxml2/archive/refs/tags/v${{ env.MINGW_XML2_VERS }}.tar.gz -o libxml2-${{ env.MINGW_XML2_VERS }}.tar.xz
	tar -xvf libxml2-${{ env.MINGW_XML2_VERS }}.tar.xz
	bash -lc "cd libxml2-${{ env.MINGW_XML2_VERS }} && ./autogen.sh"
	bash -lc "cd libxml2-${{ env.MINGW_XML2_VERS }} && ./configure --prefix=/mingw --enable-debug && make --jobs=$(($(nproc)+1))"

	- name: Install LibXML2
	run: \|
	bash -lc "make -C libxml2-${{ env.MINGW_XML2_VERS }} install"

	- name: Save LibXML2 cache
	if: steps.restore-xml2.outputs.cache-hit != 'true'
	uses: actions/cache/save@v4
	with:
	key: cache-msys-xml2
	path: libxml2-${{ env.MINGW_XML2_VERS }}


	- name: Restore PDCursesMod cache
	id: restore-pdcm
	uses: actions/cache/restore@v4
	with:
	key: cache-msys-pdcm
	path: PDCursesMod-${{ env.MINGW_PDCM_VERS }}

	- name: Build PDCursesMod
	if: steps.restore-pdcm.outputs.cache-hit != 'true'
	shell: cmd
	run: \|
	curl -L https://github.com/Bill-Gray/PDCursesMod/archive/refs/tags/v${{ env.MINGW_PDCM_VERS }}.tar.gz -o "PDCursesMod-${{ env.MINGW_PDCM_VERS }}.tar.xz"
	tar -xvf PDCursesMod-${{ env.MINGW_PDCM_VERS }}.tar.xz
	rem: consider inclusion of https://github.com/Bill-Gray/PDCursesMod/commit/45949000c3ac1375f5f821d72f46e4726a3a6a2f.patch
	bash -lc "cd PDCursesMod-${{ env.MINGW_PDCM_VERS }} && make -C wincon --jobs=$(($(nproc)+1)) INFOEX=N CHTYPE_64=Y DEBUG=Y DLL=Y DLLNAME=libpdcurses LIBNAME=libpdcurses.dll"
	bash -lc "cd PDCursesMod-${{ env.MINGW_PDCM_VERS }} && make -C wingui --jobs=$(($(nproc)+1)) CHTYPE_64=Y DEBUG=Y DLL=Y DLLNAME=libpdcurses LIBNAME=libpdcurses.dll"
	bash -lc "cd PDCursesMod-${{ env.MINGW_PDCM_VERS }} && make -C vt --jobs=$(($(nproc)+1)) CHTYPE_64=Y DEBUG=Y DLL=Y DLLNAME=libpdcurses LIBNAME=libpdcurses.dll CFLAGS=\"-Wall -Wextra -pedantic -g -DPDCDEBUG -fPIC -DPDC_DLLbuild\""
	rem: only works this way on cmd
	echo #define CHTYPE_64 > PDCursesMod-${{ env.MINGW_PDCM_VERS }}\pdcurses.h
	echo #define PDC_DLLbuild >> PDCursesMod-${{ env.MINGW_PDCM_VERS }}\pdcurses.h
	echo #include "pdcurses/curses.h" >> PDCursesMod-${{ env.MINGW_PDCM_VERS }}\pdcurses.h

	- name: Install PDCursesMod
	run: \|
	bash -lc "cd PDCursesMod-${{ env.MINGW_PDCM_VERS }} && install wincon/libpdcurses.dll.a /mingw/lib/"
	bash -lc "cd PDCursesMod-${{ env.MINGW_PDCM_VERS }} && install wincon/libpdcurses.dll /mingw/bin/"
	bash -lc "cd PDCursesMod-${{ env.MINGW_PDCM_VERS }} && install wincon/libpdcurses.dll /mingw/bin/libpdcurses-wincon.dll"
	bash -lc "cd PDCursesMod-${{ env.MINGW_PDCM_VERS }} && install wingui/libpdcurses.dll /mingw/bin/libpdcurses-wingui.dll"
	bash -lc "cd PDCursesMod-${{ env.MINGW_PDCM_VERS }} && install vt/libpdcurses.dll /mingw/bin/libpdcurses-vt.dll"
	bash -lc "install -d /mingw/include/pdcurses"
	bash -lc "cd PDCursesMod-${{ env.MINGW_PDCM_VERS }} && install -m 0644 curses.h panel.h term.h /mingw/include/pdcurses/"
	bash -lc "cd PDCursesMod-${{ env.MINGW_PDCM_VERS }} && install -m 0644 pdcurses.h /mingw/include/"

	- name: Save PDCursesMod cache
	if: steps.restore-pdcm.outputs.cache-hit != 'true'
	uses: actions/cache/save@v4
	with:
	key: cache-msys-pdcm
	path: PDCursesMod-${{ env.MINGW_PDCM_VERS }}


	- name: get cJSON
	run: \|
	curl -L https://raw.githubusercontent.com/DaveGamble/cJSON/v${{ env.MINGW_CJSON_VERS }}/cJSON.c -o .\libcob\cJSON.c
	curl -L https://raw.githubusercontent.com/DaveGamble/cJSON/v${{ env.MINGW_CJSON_VERS }}/cJSON.h -o .\libcob\cJSON.h


	# - name: Bootstrap GnuCOBOL
	# run: \|
	# sed -i 's/AM_PROG_AR/m4_ifdef$\[AM_PROG_AR\], \[AM_PROG_AR\]$/g' .\configure.ac
	# sed -i 's/po extras doc tests/po extras tests/g' .\Makefile.am
	# bash -lc "./autogen.sh"


	- name: Configure GnuCOBOL
	shell: cmd
	run: \|
	bash -lc "cd _build && ../configure %CFGOPT% --with-db --with-xml2 --with-json=local --with-curses=pdcurses --prefix=/mingw"
	rem Note: GC4 may need CPPFLAGS="-I../libcob" for local cJSON

	- name: Build GnuCOBOL
	shell: cmd
	run: \|
	bash -lc "CPATH=$(pwd) make -C _build --jobs=$(($(nproc)+1))"
	rem Note: the extra CPATH above is only required in debug builds (otherwise gcc invoked from cobc does not find libcob.h [pre-inst-env]), for some reason...

	- name: Upload config-${{ matrix.target }}.log
	if: failure()
	uses: actions/upload-artifact@v4
	with:
	name: config-${{ matrix.target }}.log
	path: _build/config.log

	- name: Cache newcob.val
	uses: actions/cache@v4
	with:
	path: _build/tests/cobol85/newcob.val
	key: newcob-val
	save-always: true
	enableCrossOsArchive: true

	- name: Run NIST85 testsuite
	# if we ever need to disable something in the tests: skip like here IF106A
	# and later expect a failure
	# perl -pi -e 's/^# OBNC1M/\$skip{IF106A} = 1; # OBNC1M/' tests/cobol85/report.pl
	# bash -lc "CPATH=$(pwd) make -C _build/tests test --jobs=$(($(nproc)+1)) \|\| echo \"WARNING: NIST85 did not pass!\""
	shell: cmd
	run: \|
	bash -lc "CPATH=$(pwd) make -C _build/tests test --jobs=$(($(nproc)+1))"
	rem Note: the extra CPATH above is only required in debug builds (otherwise gcc invoked from cobc does not find libcob.h [atlocal]), for some reason...

	- name: Upload NIST85 Test Suite results
	if: ${{ ! cancelled() }} #-> always upload as build result documentation
	uses: actions/upload-artifact@v4
	with:
	name: NIST85 results on ${{ matrix.target }}
	path: \|
	_build/tests/cobol85/summary.*
	_build/tests/cobol85/*/.log
	_build/tests/cobol85/*/.out
	_build/tests/cobol85/**/duration.txt

	- name: Run testsuite
	shell: cmd
	run: \|
	rem skip test as it sometimes works and sometimes not...
	rem instead of
	rem sed -i '/AT_SETUP(\[temporary path invalid\])/a AT_SKIP_IF(\[true\])' tests/testsuite.src/used_binaries.at
	rem use
	bash -lc "sed -i '/used_binaries/{N;/temporary path invalid/{N;N;N;N;s/traceon/traceon; echo \"workflow:1\">\"$at_check_line_file\"; at_fn_check_skip 77/;}}' tests/testsuite"

	rem change to expected fail if there's an error specific to the CI that we don't want to change
	rem in the testsuite for expected result (should normally only be a temporary thing)
	rem instead of
	rem sed -i '/AT_SETUP(\[Compare FLOAT-LONG with floating-point literal\])/a AT_XFAIL_IF(\[true\])' tests/testsuite.src/run_fundamental.at
	rem use
	rem sed -i '/run_fundamental/{N;/Compare FLOAT-LONG with floating-point literal/{N;s/at_xfail=no/at_xfail=yes/;}}' tests/testsuite

	rem to work around regular hangs we run NIST first, then the internal
	rem and the later only with 2 jobs
	bash -lc "CPATH=$(pwd) make -C _build/tests check TESTSUITEFLAGS=\"--jobs=2\""
	rem Note: the extra CPATH above is only required in debug builds (otherwise gcc invoked from cobc does not find libcob.h [atlocal]), for some reason...

	- name: Upload testsuite-${{ matrix.target }}.log
	if: ${{ ! cancelled() }} #-> always upload as build result documentation
	uses: actions/upload-artifact@v4
	with:
	name: testsuite-${{ matrix.target }}.log
	path: _build/tests/testsuite.log

	- name: Package GnuCOBOL MinGW nightly
	run: \|
	bash -lc "make -C _build distmingw"

	- name: Upload GnuCOBOL_mingw-${{ matrix.target }}
	uses: actions/upload-artifact@v4
	with:
	name: GnuCOBOL_mingw-${{ matrix.target }}
	path: _build/${{ env.DISTDIR }}

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix bug #948: make HIGH/LOW-VALUE sensitive to program collating sequence #70

Workflow file

Fix bug #948: make HIGH/LOW-VALUE sensitive to program collating sequence #70

Jobs

Run details

Workflow file for this run