-
Installation
1.1. HACS installation (recommended)
1.2. Manual Installation -
Create a sensor for your stop / station
2.1. via GUI (recommended)
2.2. via configuration.yaml (deprecated) -
Adding a card to your dashboard
3.1. Add the map to your dashboard -
Code for your configuration.yaml (deprecated)
-
Change log
6.1. How to Update / Change from Manual Installation to HACS
-
go to
Settings-->Devices and services--> add integrationanother mvgand follow the configuration flow -
create a manual card with this content:
type: custom:content-card-another-mvg
entity: sensor.yourSensor
Usually, I am lazy and use the add-ons and integrations that already exist. Home Assistant has plenty of them. While there are already some MVG integrations, some of them don't work or no longer function, and they may lack the features I desire. Since I had already programmed something similar in PHP for IP-Symcon, I have now implemented it in Home Assistant as well.
Important
This is an inofficial integration and does NOT belong to the MVG / MVV.
The use of the data (API) is for private non commercial use only (due to MVG rules, see bottom of this page).
MVG does not guarantee the availability or maintenance of the interface being used.
The integration itself, can be used private and comercial.
| Some | Screenshots |
|---|---|
 The normal View in a dashboard |
 On an Alexa Show 15 with MyPage addon |
 On an old Fire Tablet with Wallpanel |
 On a WT32-SC01 Plus with OpenHASP Needs additional coding in automations. |
More Screenshots at the bottom of this document.
Or use these steps:
- In Home Assistant go to the HACS integration (you can find the link in the left admin menu)
- on the top right click on the 3 dots
- click on "Custom Repositories"
- Repository: https://github.com/Nisbo/another_mvg
- Category: Integration
- click on add (bottom right)
- close the configuration popup (X on the top right)
- search for "Another MVG" and click on it
- click on download (bottom right)
- Restart HA
- Copy the another_mvg folder (the folder, not only the content of the folder) from the
custom_components/folder to yourconfig/custom_components/folder. - Restart HA
Or use these steps:
- go to
Settings(Einstellungen) - go to
Devices and services(Geräte und Dienste) - click on
+ ADD INTEGRATION(INTEGRATION HINZUFÜGEN) - search for
another mvgand follow the configuration flow
-
Search for your stop / station
-
Select the correct stop from the matches and configure the wanted settings.
-
There are a lot of options but normally there is no need to configure all of them. The easiest way is to select the Global ID and click on
SUBMIT(BESTÄTIGEN).
| German | English |
|---|---|
 |
 |
 |
 |
| Filter für Linien und Ziele | Filter for lines and destinations |
 |
 |
| Erweiterte Einstellungen | Advanced options |
 |
 |
- Configure the configuration.yaml (see guide below)
- Check configuration.yaml with the check function under Dev-Tools
- Restart HA again
- create a manual card with this content:
type: custom:content-card-another-mvg
entity: sensor.yourSensor
- create a manual card with this content, if you want to use the card with the big font as a single card:
type: custom:content-card-another-mvg-big
entity: sensor.yourSensor
- replace
sensor.yourSensorwith the name of your sensor. Should be something with sensor.name where name, the name from the parameter in the configuration.yaml is. - Enjoy
custom:content-card-another-mvg doesnt exist, clear the frontend / browser cache.
The card can be added and configured directly through the map selector, like other cards. Simply go to your dashboard, click on "Add Card", search for "Another MVG", and select the card from the results.
That’s all. In the standard configuration, it shows the complete map. If you want to zoom in, follow the instructions in the description. This editor is currently only available in German because I have no clue how to add language support to the card. If there is a real need, I can create an additional card for English users.
If, for some reason, you are not able to find the card, try clearing your frontend and browser cache, or try configuring the card on your own.
type: custom:content-card-another-mvg-livemap
mode: schematic
x: "2750800"
y: "1560005"
zoom: "4.8"
To load the integration, you have to add
- platform: another_mvg Required
to the sensor: part in your configuration.
Caution
Don't add the line sensor: a second time!
If it is already there, just put - platform: another_mvg below your other platforms in the sensor part.
globalid: "de:09162:10" Required
Important
The station identifier of the stop/station/location. I decided to use the identifier, instead of names, because it is more clear (for the API) and leads to less problems.
The only problem you have, is to find the identifier (globalid) by your own.
Here you can find the globalid for your station.
https://www.mvg.de/api/bgw-pt/v3/locations?query=pasing
Just replace the name in the query. If there is more than one entry, you have to find the correct one. I recommend to open the link on your PC/Notebook.
https://www.mvg.de/api/bgw-pt/v3/locations?query=pasing
name: "Pasing" Required
Is the name of the display inside the card and will be used for the sensorname. It is NOT the name of the station for the API call.
sensor:
- platform: another_mvg
name: "Pasing"
globalid: "de:09162:10"
The code above, will show all connections from Pasing. (Pasing has the globalid de:09162:10)
If you want to see only Bus, Regional Bus, Tram and/or U-Bahn (U-Bahn of course not in Pasing) you have to configure the transporttypes.
transporttypes: "SBAHN,UBAHN,TRAM,BUS,REGIONAL_BUS"
This should be selfexplaining. Add the types of transportation comma separated and without spaces in between. BUS and REGIONAL_BUS are different. BUS is MVG and REGIONAL_BUS is MVV. But it looks like, in the API they mixed it for some lines. Just add both, to be save. As mentioned above, by default all transportations are enabled. If you want to see only some, you have to use this parameter.
You can also use BAHN but this feature is not fully integrated and not enabled by default. There is also no special design / labeling available.
If you want to include it to your departure list, you can use this code:
transporttypes: "SBAHN,UBAHN,TRAM,BUS,REGIONAL_BUS,BAHN"
onlyline: "S3,S4,S20"
If you want to see only some lines, like S3, S4 and S20, you can configure it comma seperated.
hidedestination: "Mammendorf;Maisach"
If you want to see only some directions / destinations, you have to insert the EXACT names of the unwanted destinations like they are shown in the connection display. (card)
The names should be ; separated. They can be , or space sepatared, but this can lead to problems if a , or a space is in the name of the destination.
hidedestination: "Graßlfing, Olchinger See;Olching, Georgenstraße"
onlydestination: "Ostbahnhof;Holzkirchen"
If you want to see only some directions / destinations, you have to insert the EXACT names of the wanted destinations like they are shown in the connection display. (card)
The names should be ; separated. They can be , or space sepatared, but this can lead to problems if a , or a space is in the name of the destination.
onlydestination: "Graßlfing, Olchinger See;Olching, Georgenstraße"
limit: 15
By default you will see 6 departures. If you want to see more or less, you have to configure it. Please add only a number and no quotes. Die API will pull a maximum of 80 departures. If you use "filters" like hidedestination or onlydestination, witch filter out 40 entries, you will only see the remaining 40 as maximum.
hidename: True
If you don't want to see the name of the card (the name of the station you configured in configuration.yaml with the name parameter) you have to set this parameter to True.
doublestationnumber: "2"
Important
If you want to create 2 or more cards for the same globalid, you have to use this parameter. (e.g. one for BUS, one for SBAHN, one for TRAM) It can be a number or a letter. Also more numbers or letters are possible. No special chars are allowed and also no space.
globalid2: "de:09179:6180"
If you have 2 stations close together (or far far away) like a train station and a bus stop, you can combine both in one card.
Keep in mind, that you have to insert all transportations in transporttypes.
The use of this function can lead to problems, because there are 2 API calls in 1 second and it can happen, that the API blocks the 2nd call.
If you use it only in one card, it should be no problem. If you use more, the risk is higher that the API blocks the request.
Default is "Europe/Berlin".
If your system is running with UTC settings, you can use UTC in timezone_from.
If you want to display a different timezone, you can define it in timezone_to
timezone_from : "UTC"
timezone_to : "Europe/Berlin"
alert_for: "S3,S4,S20"
If you configure this option, there will be 3 additional attributes (per line) for your sensor. Format:
notifyLateMvgConnectionLine_1
notifyLateMvgConnectionLine_2
notifyLateMvgConnectionLine_3
If you configure the the alert for S4 the name of the attributes are as follow
notifyLateMvgConnectionS4_1
notifyLateMvgConnectionS4_2
notifyLateMvgConnectionS4_3
You can use it e.g. in an automation as condition
condition:
- condition: numeric_state
entity_id: sensor.olching_und_eichenau
attribute: notifyLateMvgConnectionS4_3
above: 0
The possible values from above in this example are
- -1 --> departure is cancelled
- 0 --> departure is in time
- greater than 0 --> the delay in minutes of this departure
I am using this in an automation to change the color of a LED from WLED
alias: WLED Test - Unten Gelb
description: ""
trigger:
- platform: state
entity_id:
- sensor.olching_und_eichenau
attribute: connections
- platform: time_pattern
minutes: "*"
condition:
- condition: numeric_state
entity_id: sensor.olching_und_eichenau
attribute: notifyLateMvgConnectionS4_3
above: 0
action:
- service: select.select_option
target:
device_id: 2e48d67fbe95d4ee7c9ef03bdf8ffe08
data:
option: Unten Gelb
- service: select.select_option
target:
device_id: d99baaee5d4ecce453980a792ec2f3a1
data:
option: Bahn 3 gelb
mode: single
This is an example code from my WLED configuration, dont copy and paste it, if you dont know what you are doing. ;)
sensor:
- platform: another_mvg
name: "Olching"
globalid: "de:09179:6110"
hidedestination: "Mammendorf,Maisach"
limit: 15
transporttypes: "SBAHN"
- platform: another_mvg
name: "Olching Busabfahrten"
globalid: "de:09179:6110"
hidedestination: "Graßlfing, Olchinger See;Olching, Georgenstraße"
onlyline: "860,831,843"
limit: 15
transporttypes: "BUS,REGIONAL_BUS"
doublestationnumber: "2"
- platform: another_mvg
name: "Eichenau"
globalid: "de:09179:6180"
hidedestination: "Geltendorf,Buchenau,Grafrath"
limit: 15
transporttypes: "SBAHN"
- platform: another_mvg
name: "Eichenau Busabfahrten"
globalid: "de:09179:6181"
hidedestination: "Freiham (S) Süd"
limit: 15
transporttypes: "BUS,REGIONAL_BUS"
onlyline: "860"
- platform: another_mvg
name: "Pasing"
globalid: "de:09162:10"
onlyline: "S3,S4,S20"
limit: 20
transporttypes: "SBAHN"
hidedestination: "Deisenhofen,Holzkirchen,Grafing Bahnhof, Trudering, Ostbahnhof,Haar,Ebersberg, München Hbf, Höllriegelskreuth"
timezone_from : "Europe/Berlin"
timezone_to : "Europe/Berlin"
- platform: another_mvg
name: "Pasing - alle Abfahrten"
globalid: "de:09162:10"
limit: 20
doublestationnumber: "2"
transporttypes: "SBAHN,BUS,REGIONAL_BUS,TRAM"
- platform: another_mvg
name: "Olching und Eichenau"
globalid: "de:09179:6110"
globalid2: "de:09179:6180"
hidedestination: "Mammendorf,Maisach,Geltendorf,Buchenau,Grafrath"
limit: 15
transporttypes: "SBAHN"
doublestationnumber: "3"
alert_for: "S3,S4,S20"
- platform: another_mvg
name: "UBahn Test"
globalid: "de:09162:360"
transporttypes: "UBAHN"
limit: 15
hidename: True
- platform: another_mvg
name: "Pasing - alle Abfahrten"
globalid: "de:09162:10"
limit: 20
- platform: another_mvg
name: "Pasing"
globalid: "de:09162:10"
onlyline: "S3,S4,S20"
limit: 20
transporttypes: "SBAHN"
hidedestination: "Deisenhofen,Holzkirchen,Grafing Bahnhof, Trudering, Ostbahnhof,Haar,Ebersberg, München Hbf, Höllriegelskreuth"
- platform: another_mvg
name: "Olching Busabfahrten"
globalid: "de:09179:6110"
hidedestination: "Graßlfing, Olchinger See;Olching, Georgenstraße"
onlyline: "860,831,843"
limit: 15
transporttypes: "BUS,REGIONAL_BUS"
- platform: another_mvg
name: "UBahn Test"
globalid: "de:09162:360"
transporttypes: "UBAHN"
limit: 15
hidename: True
- platform: another_mvg
name: "Eichenau"
globalid: "de:09179:6180"
hidedestination: "Geltendorf,Buchenau,Grafrath"
limit: 15
transporttypes: "SBAHN"
- platform: another_mvg
name: "Olching und Eichenau"
globalid: "de:09179:6110"
globalid2: "de:09179:6180"
hidedestination: "Mammendorf,Maisach,Geltendorf,Buchenau,Grafrath"
limit: 15
transporttypes: "SBAHN"
| Mobile App View | Mobile App View |
|---|---|
 |
 |
 |
 |
- better error handling for connection problems
- added timezone options, default is "Europe/Berlin" if your system is running with UTC settings, you can use UTC in
timezone_from. If you want to display a different timezone, you can define it intimezone_to -
timezone_from : "UTC" timezone_to : "Europe/Berlin" - minor fixes
- added an option
alert_for: "S3,S4,S20"to set attributes for your sensor if the next 3 departures of defined lines are late or cancelled .... or in time. (Ref to "Alert Settings") - there is a 2nd lovalace card for single card use. Means with big font so that you can put it on a screen or on an Amazon Show 15 (with the silk browser and the kiosk mode HA addon via Media Function from HA)
- You have to add the resource
/local/content-card-another-mvg-big.jsas JavaScripts-Modul - improved error handling, additionally there will be an indicator on the card (Stop Name - nicht aktuell) if the data is outdated (older than 1 minute)
- fixed a bug where the sensor was updated with wrong data (thx to @msp1974 )
- improved error handling
- improved error reporting in the system log
- workaround for missing track 2a (not provided by the API) in Ebersberg. It assumes that if there is no platform provided by the API that the departure is from track 2a (Gleis 2a).
- fixed an issue with CSS on some installations (possible problems with other addons)
- You can also use
BAHNbut this feature is not fully integrated and not enabled by default. There is also no special design / labeling available. If you want to include it to your departure list, you can use this code:
transporttypes: "SBAHN,UBAHN,TRAM,BUS,REGIONAL_BUS,BAHN"
- Now with the option to install Another MVG via HACS
- Custom cards will be registered automatically, not longer needed to add them manually
- Updated the API address
- Formerly planned and announced as v1.6.0, now released as v2.0.0 due to the amount of changes.
- v2.0.0 includes a complete GUI configuration, following the integration in HACS from the last version.
- Added language files for English and German.
- added "Only some destinations"
onlydestination: "Ostbahnhof;Holzkirchen"
If you want to see only some directions / destinations, you have to insert the EXACT names of the wanted destinations like they are shown in the connection display. (card)
The names should be ; separated. They can be , or space sepatared, but this can lead to problems if a , or a space is in the name of the destination.
onlydestination: "Graßlfing, Olchinger See;Olching, Georgenstraße"
- Improved error handling in the custom card if a sensor is unavailable or deleted.
- Improved data handling of the custom card during startup.
- Fixed the deprecation warning.
- Updated documentation to improve the installation process.
- After you got the update notification from Home Assistant, just click on "Install"
- restart Home Assistant
- make sure the frontend cache is cleared
- Replace all files with the new files (like during the installation) and restart HA.
- Afterwards you have to clear the frontend cache on all devices.
🔴 Due to the fact, that Custom cards will be registered (since v1.5.0) automatically, you have to remove these 2 files from your www folder. 🔴
content-card-another-mvg-big.js
content-card-another-mvg.js
You also have to remove these 2 cards from Settings --> Dashboards --> 3 dots on the top right --> Resources
/local/content-card-another-mvg.js
/local/content-card-another-mvg-big.js
- Remove the old Files and follow the instructions from the HACS installation part.
- Remove the old Files (and remove the entries from the configuration.yaml)
- Restart HACS
- follow the instructions from the HACS installation part.
⚠️ you can also comment (put a # in front of each another_mvg related line) the settings in your configuration.yaml and uncomment it after the installation for the case that you want to stay with yaml configuration.
- To all the guys in the Home Assistant forum for the help.
- @msp1974 for his code for the card integration
- To the MVG for the API.
- To other guys on github, were I was able to learn more about python code and Home Assistant.
- And to my best friend Google. ^^
Die Nutzung der Home Assistant Integration another_mvg erfolgt auf eigene Gefahr. Der Entwickler übernimmt keine Verantwortung oder Haftung für etwaige Schäden, die durch die Verwendung dieser Integration entstehen können. Dieser Haftungsausschluss erstreckt sich auf direkte oder indirekte Schäden, finanzielle Verluste, Datenverluste, Beeinträchtigung des Systembetriebs oder andere potenzielle Unannehmlichkeiten.
Die Integration wird "wie sie ist" und ohne jegliche Gewährleistung bereitgestellt. Der Entwickler übernimmt keine Garantie für die Richtigkeit, Vollständigkeit oder Zuverlässigkeit der Funktionen dieser Integration. Es wird empfohlen, regelmäßige Sicherungen durchzuführen und alle notwendigen Sicherheitsvorkehrungen zu treffen, um unerwünschte Folgen zu vermeiden.
Die Benutzer sind angehalten, die Anweisungen und Empfehlungen in der Dokumentation der Integration zu befolgen. Jegliche Modifikationen oder Anpassungen an der Integration erfolgen auf eigenes Risiko und können die Funktionalität beeinträchtigen.
Durch die Verwendung dieser Home Assistant Integration erklärt sich der Benutzer mit den Bedingungen dieses Haftungsausschlusses einverstanden. Es wird empfohlen, regelmäßig auf Aktualisierungen oder Änderungen der Integration zu achten und diese entsprechend zu berücksichtigen.
The use of the Home Assistant Integration another_mvg is at your own risk. The developer assumes no responsibility or liability for any damages that may arise from the use of this integration. This disclaimer extends to direct or indirect damages, financial losses, data loss, impairment of system operation, or other potential inconveniences.
The integration is provided "as-is" and without any warranty. The developer makes no guarantees regarding the accuracy, completeness, or reliability of the functions of this integration. It is recommended to perform regular backups and take all necessary security precautions to avoid undesirable consequences.
Users are encouraged to follow the instructions and recommendations in the documentation of the integration. Any modifications or adjustments to the integration are done at your own risk and may affect its functionality.
By using this Home Assistant Integration, the user agrees to the terms of this disclaimer. It is advised to regularly check for updates or changes to the integration and take them into consideration accordingly.
German: ... Für private, nicht-kommerzielle Zwecke, wird eine gemäßigte Nutzung ohne unsere ausdrückliche Zustimmung geduldet. Jegliche Form von Data-Mining stellt keine gemäßigte Nutzung dar. Wir behalten uns vor, die Duldung grundsätzlich oder in Einzelfällen zu widerrufen. ...
English: ... For private, non-commercial purposes, moderate use is tolerated without our express consent. Any form of data mining does not constitute moderate use. We reserve the right to revoke our tolerance in principle or in individual cases. ...
Full (german) text can be found in the MVG impressum at the bottom.