Taiga contrib ldap auth ext

Extended Taiga.io plugin for LDAP authentication.

This is a fork of ensky/taiga-contrib-ldap-auth, which also retrieves the various contributions and other forks into one.

🐳 Installation with Docker

If you installed a dockerized Taiga using the 30 Minute Setup approach, you should be able to install this plugin using this guide.

The following will assume that you have a clone of the kaleidos-ventures/taiga-docker repository on the computer you want to host Taiga on.

taiga-back

1. Edit the taiga-back section in the docker-compose.yml: Replace image: taigaio/taiga-back:latest with build: ./custom-back
2. Create a folder custom-back next to the docker-compose.yml file
3. In this folder, create a file config.append.py. Copy the contents of the taiga-back configuration section from this document into it.
4. In this folder, also create a Dockerfile. The contents of the file are collapsed below.

If you were to start Taiga now, it would not pull the taiga-back directly from Docker Hub but instead build the image from the specified Dockerfile. This is exactly what we want, however, do not start Taiga yet – there is still work to be done in taiga-front.

custom-back/Dockerfile

Click here to expand

FROM taigaio/taiga-back:latest

# Insert custom configuration into the taiga configuration file
COPY config.append.py /taiga-back/settings
RUN cat /taiga-back/settings/config.append.py >> /taiga-back/settings/config.py && rm /taiga-back/settings/config.append.py

RUN pip install taiga-contrib-ldap-auth-ext

The statements in the Dockerfile have the following effect:

1. FROM ... bases the image we build on the official taigaio/taiga-back image.
2. COPY ... and RUN ... copy the config.append.py file into the container, append it to /taiga-back/settings/config.py and then delete it again.
3. RUN pip install ... installs this plugin.

taiga-front

1. Edit the taiga-front section in the docker-compose.yml. Insert the following below networks:

   volumes:
   - ./custom-front/conf.override.json:/usr/share/nginx/html/conf.json

   There should already be a commented block hinting that you can do this (just with a different path). You can delete this block, or, alternatively, place the file at the path given there and just remove the # .

2. Create a folder custom-front next to the docker-compose.yml file

3. In this folder, create a file conf.override.json. The contents of the file are below.

custom-front/conf.override.json

This file will replace the conf.json file. As the conf.json is normally automatically generated at runtime from the configuration in your docker-compose.yml, this is a bit trickier. Basically, the process boils down to this:

1. Somehow get a valid conf.json
2. Create a modified version by adding the following entry somewhere in the JSON:

   "loginFormType": "ldap",

The question is: How do you get a valid conf.json?

• The relevant section of the Taiga 30 min setup guide recommends to use an example config.json which you then have to adjust.
• Alternatively, you could also start the container first without any adjustments, and then copy the file out like this:

  docker cp taiga_taiga-front_1:/usr/share/nginx/html/conf.json conf.json

  You then have a valid, production-ready conf.json you can just extend by the entry mentioned above. I'd recommend this method.

📦 Installation without Docker

Installation

Install the PIP package taiga-contrib-ldap-auth-ext in your taiga-back python virtualenv:

pip install taiga-contrib-ldap-auth-ext

If needed, change pip to pip3 to use the Python 3 version.

For an even simpler installation, you can use our own Docker image: https://github.com/Monogramm/docker-taiga

taiga-back

Append the contents of the taiga-back configuration section from this document to the file settings/common.py (for Taiga >5.0) or settings/local.py (for Taiga ≤5.0).

taiga-front

Change the loginFormType setting to "ldap" in dist/conf.json:

"loginFormType": "ldap",

🔧 Configuration

taiga-back configuration

If you use the installation with Docker, put the following contents in the file custom-back/config.append.py.

If you use the installation without Docker, append the following contents to the file settings/common.py (for Taiga >5.0) or settings/local.py (for Taiga ≤5.0).

Click here to expand

INSTALLED_APPS += ["taiga_contrib_ldap_auth_ext"]

# Multiple LDAP servers are currently not supported, see
# https://github.com/Monogramm/taiga-contrib-ldap-auth-ext/issues/16
LDAP_SERVER = "ldaps://ldap.example.com"
LDAP_PORT = 636

LDAP_BIND_DN = "CN=SVC Account,OU=Service Accounts,OU=Servers,DC=example,DC=com"
LDAP_BIND_PASSWORD = "verysecurepassword"

LDAP_SEARCH_BASE = 'OU=DevTeam,DC=example,DC=net'

LDAP_USERNAME_ATTRIBUTE = "uid"
LDAP_EMAIL_ATTRIBUTE = "mail"
LDAP_FULL_NAME_ATTRIBUTE = "givenName"

LDAP_SAVE_LOGIN_PASSWORD = False

LDAP_MAP_USERNAME_TO_UID = None

Change the following fields matching your setup:

LDAP_SERVER and LDAP_PORT: You will definitely have to change the server URL. If possible, try to keep the ldaps:// to use a secure connection. The port can likely stay as is, unless...

• ... you run the LDAP server on a different (non-standard) port.
• ... you want to use unencrypted, insecure LDAP: In this case, change ldaps:// to ldap:// and the port to 389.
• ... you want to use STARTTLS. In this case, you have to make the same changes as for unencrypted, insecure LDAP and set LDAP_START_TLS = True, making the section look like this:

  LDAP_SERVER = "ldap://ldap.example.com"
  LDAP_PORT = 389
  LDAP_START_TLS = True

  What happens is that an unencrypted connection is established first, but then upgraded to a secure connection. To the best of my knowledge, this should also be safe – however, I like the ldaps:// variant more.

LDAP_BIND_DN, LDAP_BIND_PASSWORD: You will need to change them.

The bind user is a dedicated service account. The plugin will connect to the LDAP server using this service account and search for an LDAP entry that has a LDAP_USERNAME_ATTRIBUTE or LDAP_EMAIL_ATTRIBUTE matching the user-provided login.

If the search is successful, the found LDAP entry and the user-provided password are used to attempt a bind to LDAP. If the bind is successful, then we can say that the user is authorised to log in to Taiga.

If LDAP_BIND_DN is not specified or blank, an anonymous bind is attempted.

It is recommended to limit the service account and only allow it to read and search the LDAP structure (no write or other LDAP access). The credentials should also not be used for any other account on the network. This minimizes the damage in cases of a successful LDAP injection or if you ever accidentially give someone access to the configuration file (e.g. by committing it into version control or having misconfigured permissions). Use a suitably strong, ideally randomly generated password.

LDAP_SEARCH_BASE: The subtree where the users are located.

LDAP_USERNAME_ATTRIBUTE, LDAP_EMAIL_ATTRIBUTE, LDAP_FULL_NAME_ATTRIBUTE: These are the LDAP attributes used to get the username, email and full name shown in the Taiga application. They need to have a value in LDAP. Depending on your LDAP setup, you might need to change them.

LDAP_SAVE_LOGIN_PASSWORD: Set this to True or remove the line if you want to store the passwords in the local database as well.

LDAP_MAP_USERNAME_TO_UID: This line fixes a bug. If omitted, the plugin will likely crash and no authentication is possible.

Additional configuration options

Click here to expand

By default, Taiga will fall back to normal authentication if LDAP authentication fails. Add the following line to disable this and only allow LDAP login:

LDAP_FALLBACK = ""

You can specify additional search criteria that will be ANDed using the following line:

LDAP_SEARCH_FILTER_ADDITIONAL = '(mail=*)'

If you want to change how the LDAP username, e-mail or name are mapped to the local database, you can use the following lines to do so:

def _ldap_slugify(uid: str) -> str:
    """Map an LDAP username to a local DB user unique identifier.

    Upon successful LDAP bind, will override returned username attribute
    value. May result in unexpected failures if changed after the database
    has been populated. 
    """

    # example: force lower-case
    return uid.lower()
    
LDAP_MAP_USERNAME_TO_UID = _ldap_slugify


def _ldap_map_email(email: str) -> str:
    ...

def _ldap_map_name(name: str) -> str:
    ...

LDAP_MAP_EMAIL = _ldap_map_email
LDAP_MAP_NAME = _ldap_map_name

To support alternative TLS ciphersuites, protocol versions or disable certificate validation (note that all of these options have the power to harm your security, so apply them with caution), use the following lines:

from ldap3 import Tls
import ssl

# Add or remove options or change values as necessary.
LDAP_TLS_CERTS = Tls(validate=ssl.CERT_NONE, version=ssl.PROTOCOL_TLSv1, ciphers='RSA+3DES')

To not store the passwords in the local database, use the following line:

LDAP_SAVE_LOGIN_PASSWORD = False

Group management via LDAP does not yet exist, see issues #15 and #17. However, the configuration would look a bit like this:

# Group search filter where $1 is the project slug and $2 is the role slug
#LDAP_GROUP_SEARCH_FILTER = 'CN=$2,OU=$1,OU=Groups,DC=example,DC=net'
# Use an attribute in the user entry for membership
#LDAP_USER_MEMBER_ATTRIBUTE = 'memberof,primaryGroupID'
# Starting point within LDAP structure to search for login group
#LDAP_GROUP_SEARCH_BASE = 'OU=Groups,DC=example,DC=net'
# Group classes filter
#LDAP_GROUP_FILTER = '(|(objectclass=group)(objectclass=groupofnames)(objectclass=groupofuniquenames))'
# Group member attribute
#LDAP_GROUP_MEMBER_ATTRIBUTE = 'memberof,primaryGroupID'

# Taiga super users group id
#LDAP_GROUP_ADMIN = 'OU=TaigaAdmin,DC=example,DC=net'

💡 Further notes

• Security recommendation: The service account to perform the LDAP search should be configured to only allow reading/searching the LDAP structure. No other LDAP (or wider network) permissions should be granted for this user because you need to specify the service account password in the configuration file. A suitably strong password should be chosen, eg. VmLYBbvJaf2kAqcrt5HjHdG6.
• If you are using the Taiga's built-in USER_EMAIL_ALLOWED_DOMAINS config option, all LDAP email addresses will still be filtered through this list. Ensure that if USER_EMAIL_ALLOWED_DOMAINS != None, that your corporate LDAP email domain is also listed there. This is due to the fact that LDAP users are automatically "registered" behind the scenes on their first login.
• If you plan to only allow your LDAP users to access Taiga, set the PUBLIC_REGISTER_ENABLED config option to False. This will prevent any external user to register while still automatically register LDAP users on their first login.
• Instead of appending to the common.py file in taiga-back, you can also insert the configuration into config.py. In our tests, both ways worked.