Edge-o-Matic 3000 - An Automated Orgasm Denial Device

Using an inflatable butt plug to detect pressure changes indicative of pelvic floor contractions, this software, and associated hardware, is used to detect when the user is approaching orgasm and control stimulation accordingly. The net result: automated edging and orgasm denial.

Web UI

Edge-o-Matic 3000 devices support a WebSocket communication channel to be used on a web UI. The current Web UI can be accessed at link.maustec.io. For control outside your Local Area Network, please consider a port-forwarding software such as Ngrok. You will have to permit insecure content for that domain within Chrome to be able to connect your device while the page is loaded over HTTPS. This cannot be done automatically for you. A remote bridge for Maus-Link compatible devices is in development and should be released Q4 2024. This will allow internet control of genuine Maus-Tec products.

WebSocket API

Documentation for the WebSocket API can be found in doc/WebSocket.md.

Configuration

If you have hardware already, please see examples/config.json or your own config.json file shipped with your SD card. Note that this JSON document does not support comment preprocessing, and is automatically generated. Here is a quick summary of config variables:

Key	Type	Default	Note
wifi_ssid	String	""	Your WiFi SSID.
wifi_key	String	""	Your WiFi Password.
wifi_on	Boolean	false	Enable WiFi and the Websocket server. Cannot be enabled if AzureFang is on.
bt_display_name	String	"Edge-o-Matic 3000"	AzureFang* device name, you might wanna change this.
bt_on	Boolean	false	Enable AzureFang connectivity. Cannot be enabled if WiFi is on.
force_bt_coex	Boolean	false	Force AzureFang and WiFi at the same time**.
led_brightness	Byte	128	Status LED maximum brightness.
websocket_port	Int	80	Port to listen for incoming Websocket connections.
use_ssl	Boolean	false	Enable SSL server, which will eat all your RAM!
hostname	String	"eom3k"	Local hostname for your device.
motor_start_speed	Byte	10	The minimum speed the motor will start at in automatic mode.
motor_max_speed	Byte	128	Maximum speed for the motor in auto-ramp mode.
motor_ramp_time_s	Int	30	The time it takes for the motor to reach Motor Max Speed in automatic mode.
edge_delay	Int	10000	Minimum time (ms) after edge detection before resuming stimulation.
max_additional_delay	Int	10000	Maximum time (ms) that can be added to the edge delay before resuming stimulation. A random number will be picked between 0 and this setting each cycle. 0 to disable.
minimum_on_time	Int	1000	Time (ms) after stimulation starts before edge detection is resumed.
screen_dim_seconds	Int	10	Time, in seconds, before the screen dims. 0 to disable.
screen_timeout_seconds	Int	0	Time, in seconds, before the screen turns off. 0 to disable.
reverse_menu_scroll	Boolean	false	Reverse the direction of the scroll wheel when navigating menus.
pressure_smoothing	Byte	5	Number of samples to take an average of. Higher results in lag and lower resolution!
classic_serial	Boolean	false	Output continuous stream of arousal data over serial for backwards compatibility with other software.
sensitivity_threshold	Int	600	The arousal threshold for orgasm detection. Lower values stop sooner.
update_frequency_hz	Int	50	Update frequency for pressure readings and arousal steps. Higher = crash your serial monitor.
sensor_sensitivity	Byte	128	Analog pressure prescaling. Please see instruction manual.
use_average_values	Boolean	false	Use average values when calculating arousal. This smooths noisy data.
vibration_mode	VibrationMode	RampStop	Vibration Mode for main vibrator control.
use_post_orgasm	Boolean	false	Use post-orgasm torture mode and functionality.
clench_pressure_sensitivity	Int	200	Minimum additional Arousal level to detect clench. See manual.
clench_time_to_orgasm_ms	Int	1500	Threshold variable that is milliseconds count of clench to detect orgasm. See manual.
clench_detector_in_edging	Boolean	false	Use the clench detector to adjust Arousal. See manual.
auto_edging_duration_minutes	Int	30	How long to edge before permiting an orgasm.
post_orgasm_duration_seconds	Int	10	How long to stimulate after orgasm detected.
edge_menu_lock	Boolean	false	Deny access to menu starting in the edging session.
post_orgasm_menu_lock	Boolean	false	Deny access to menu starting after orgasm detected.
max_clench_duration_ms	Int	3000	Duration the clench detector can raise arousal if clench detector turned on in edging session.
clench_time_threshold_ms	Int	900	Threshold variable that is milliseconds counts to detect the start of clench.

* AzureFang refers to a common wireless technology that is blue and involves chewing face-rocks. However, the trademark holders of this technology require the name to be licensed, so we're totally just using AzureFang.

** AzureFang and WiFi coexistance is EXPERIMENTAL and may cause system instability. If your device resets with both of these turned on, please turn them back off. Additionally, it might be helpful to post some info in discord of the last serial dump on the console when your device reset, assuming you have a console connected.

Vibration Modes:

ID	Name	Description
1	Ramp-Stop	Vibrator ramps up from set min speed to max speed, stopping abruptly on arousal threshold crossing.
2	Depletion	Vibrator speed ramps up from min to max, but is reduced as arousal approaches threshold.
3	Enhancement	Vibrator speed ramps up as arousal increases, holding a peak for ramp_time.
0	Global Sync	When set on secondary vibrators, they will follow the primary vibrator speed.

post_orgasm_duration_seconds:

Seconds	Description
0	Turn off stimulation at orgasm dectection - Failed Orgasm
5-15	Turn off stimulation after amount of seconds - Normal orgasm
16-4095	Turn off stimulation after amount of seconds - Post orgasm Torture

Post-Orgasm and clench detector modules are community contributed features. While we will do our best to provide support for these, we kindly request that you ask questions related to this in Discord under Firmware Development and not Customer Support. Thank you for your understanding.

Hardware

Hardware builds for this project can be purchased from Maus-Tec Electronics, at maustec.io/eom.

Hardware development and assembly helps keep pizza in the freezer and a roof over the head of the maintainer. Your support helps a small business grow into something neat, and ensures future devices like this can continue to be produced. Genuine hardware purchases also ensure continued maintenance and support can be provided for the project.

The User Guide for the hardware can be downloaded at doc/Edge-o-Matic_UserGuide.docx.

That RJ45 Jack

The RJ45 Jack IS NOT ETHERNET! This is the Maus-Bus Accessory Port, used to connect various Maus-Bus compatible devices to build up a network of accessories and dongles to customize your play experience. Please only connect authorized Maus-Bus accessories to this port. Unauthorized or counterfeit devices can damage your Edge-o-Matic. Do not connect it to an ethernet jack. This is not for internet.

Contributions

Any changes to configuration values should be linted. Run ruby bin/config_lint.rb to check documentation, serializers and structs for consistency.

Thanks for readin'!

---

Maus-Bus and Maus-Link are trademarks of Maus-Tec LLC. Edge-o-Matic is a registered trademark of Maus-Tec LLC. If you are a 3rd party hardware manufacturer looking to certify your Maus-Bus connected device for use with the Edge-o-Matic, we encourage you to contact [email protected] and our friendly customer support robot will be glad to assist!