Netbox ansible #97
Netbox ansible #97
Conversation
📝 Walkthrough📝 WalkthroughWalkthroughThis pull request introduces a comprehensive set of changes to facilitate the management of devices and networks in a HomeLab environment using Ansible. It includes the creation of a new inventory YAML file, the addition of tasks for integrating with NetBox, and the definition of variables for sites, manufacturers, device types, and platforms. The changes aim to enhance the automation and organization of device management, allowing for structured deployment and configuration. Changes
Suggested labels
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 11
🧹 Outside diff range and nitpick comments (6)
ansible/roles/netbox_ansible/tasks/main.yaml (1)
4-4: Use boolean value for gather_factsReplace
nowithfalsefor thegather_factsparameter to follow YAML boolean conventions.- gather_facts: no + gather_facts: false🧰 Tools
🪛 GitHub Check: CodeFactor
[warning] 4-4: ansible/roles/netbox_ansible/tasks/main.yaml#L4
Truthy value should be one of [false, true] (truthy)ansible/inventory/main.yaml (1)
12-12: Remove trailing whitespaceRemove trailing spaces to maintain consistent formatting.
Also applies to: 19-19
🧰 Tools
🪛 yamllint (1.35.1)
[error] 12-12: trailing spaces
(trailing-spaces)
🪛 GitHub Check: CodeFactor
[failure] 12-12: ansible/inventory/main.yaml#L12
Trailing spaces. (trailing-spaces)ansible/roles/netbox_ansible/vars/main.yaml (2)
19-19: Standardize boolean valuesUse lowercase
falseinstead ofFalsefor boolean values to follow YAML conventions.- Full_depth: False + full_depth: falseAlso, consider using snake_case for consistency:
Full_depth→full_depthAlso applies to: 25-25, 31-31, 37-37
🧰 Tools
🪛 GitHub Check: CodeFactor
[warning] 19-19: ansible/roles/netbox_ansible/vars/main.yaml#L19
Truthy value should be one of [false, true] (truthy)
39-49: Fix YAML formatting issues
- Fix indentation for the
platformssection- Add newline at end of file
- Remove trailing spaces
-platforms: +platforms: - name: "Proxmox" slug: "proxmox" - name: "TrueNAS Scale" slug: "truenas-scale" - name: "Ubuntu" slug: "ubuntu" - name: "Debian" slug: "debian" - name: "Alpine-Linux" - slug: "alpine" + slug: "alpine" +🧰 Tools
🪛 yamllint (1.35.1)
[error] 39-39: syntax error: expected , but found ''
(syntax)
[warning] 40-40: wrong indentation: expected 3 but found 2
(indentation)
[error] 49-49: no new line character at the end of file
(new-line-at-end-of-file)
🪛 GitHub Check: CodeFactor
[failure] 49-49: ansible/roles/netbox_ansible/vars/main.yaml#L49
No new line character at the end of file. (new-line-at-end-of-file)
[failure] 40-40: ansible/roles/netbox_ansible/vars/main.yaml#L40
Wrong indentation: expected 3 but found 2.ansible/roles/netbox_ansible/tasks/device_tasks.yaml (1)
17-27: Improve interface type mapping and MAC address validationThe interface creation task uses a custom filter
get_interface_typebut doesn't validate the returned type against NetBox's supported types.Consider adding validation for interface types and MAC addresses:
- name: "TASK 110: NETBOX >> ADD INTERFACES TO NETBOX" + vars: + valid_interface_types: + - "1000base-t" + - "virtual" + - "lag" netbox.netbox.netbox_device_interface: netbox_url: "{{ netbox_url }}" netbox_token: "{{ netbox_token }}" data: device: "{{ inventory_hostname }}" name: "{{ item.key }}" - form_factor: "{{ item.key | get_interface_type }}" + form_factor: >- + {{ item.key | get_interface_type | + assert_that("_ in valid_interface_types") }} mac_address: "{{ item.value.macaddress | default('00:00:00:00:00:00') }}" state: present with_dict: "{{ ansible_facts['net_interfaces'] | default({}) }}"ansible/roles/netbox_ansible/tasks/setup_tasks.yaml (1)
1-1: Enhance security configuration for NetBox integrationConsider adding SSL verification and secure token handling across all tasks.
Add the following security enhancements:
- Enable SSL verification:
netbox.netbox.netbox_device: netbox_url: "{{ netbox_url }}" netbox_token: "{{ netbox_token }}" validate_certs: true # Enable SSL verification
- Store sensitive data in Ansible Vault:
# Create encrypted vars file ansible-vault create group_vars/netbox/vault.yml # Add sensitive variables netbox_token: your-secret-token
- Reference encrypted variables in your playbook:
vars_files: - group_vars/netbox/vault.yml
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (6)
ansible/inventory/main.yaml(1 hunks)ansible/roles/netbox_ansible/tasks/device_tasks.yaml(1 hunks)ansible/roles/netbox_ansible/tasks/ip_tasks.yaml(1 hunks)ansible/roles/netbox_ansible/tasks/main.yaml(1 hunks)ansible/roles/netbox_ansible/tasks/setup_tasks.yaml(1 hunks)ansible/roles/netbox_ansible/vars/main.yaml(1 hunks)
🧰 Additional context used
🪛 GitHub Check: CodeFactor
ansible/roles/netbox_ansible/tasks/main.yaml
[warning] 4-4: ansible/roles/netbox_ansible/tasks/main.yaml#L4
Truthy value should be one of [false, true] (truthy)
ansible/roles/netbox_ansible/vars/main.yaml
[failure] 32-32: ansible/roles/netbox_ansible/vars/main.yaml#L32
Trailing spaces. (trailing-spaces)
[failure] 7-7: ansible/roles/netbox_ansible/vars/main.yaml#L7
Trailing spaces. (trailing-spaces)
[failure] 14-14: ansible/roles/netbox_ansible/vars/main.yaml#L14
Trailing spaces. (trailing-spaces)
[warning] 31-31: ansible/roles/netbox_ansible/vars/main.yaml#L31
Truthy value should be one of [false, true] (truthy)
[warning] 25-25: ansible/roles/netbox_ansible/vars/main.yaml#L25
Truthy value should be one of [false, true] (truthy)
[failure] 49-49: ansible/roles/netbox_ansible/vars/main.yaml#L49
No new line character at the end of file. (new-line-at-end-of-file)
[failure] 38-38: ansible/roles/netbox_ansible/vars/main.yaml#L38
Trailing spaces. (trailing-spaces)
[failure] 20-20: ansible/roles/netbox_ansible/vars/main.yaml#L20
Trailing spaces. (trailing-spaces)
[failure] 31-31: ansible/roles/netbox_ansible/vars/main.yaml#L31
Trailing spaces. (trailing-spaces)
[warning] 37-37: ansible/roles/netbox_ansible/vars/main.yaml#L37
Truthy value should be one of [false, true] (truthy)
[failure] 13-13: ansible/roles/netbox_ansible/vars/main.yaml#L13
Trailing spaces. (trailing-spaces)
[failure] 40-40: ansible/roles/netbox_ansible/vars/main.yaml#L40
Wrong indentation: expected 3 but found 2.
[warning] 19-19: ansible/roles/netbox_ansible/vars/main.yaml#L19
Truthy value should be one of [false, true] (truthy)
[failure] 26-26: ansible/roles/netbox_ansible/vars/main.yaml#L26
Trailing spaces. (trailing-spaces)
ansible/roles/netbox_ansible/tasks/setup_tasks.yaml
[failure] 33-33: ansible/roles/netbox_ansible/tasks/setup_tasks.yaml#L33
Trailing spaces. (trailing-spaces)
[failure] 18-18: ansible/roles/netbox_ansible/tasks/setup_tasks.yaml#L18
Trailing spaces. (trailing-spaces)
ansible/inventory/main.yaml
[failure] 19-19: ansible/inventory/main.yaml#L19
Trailing spaces. (trailing-spaces)
[failure] 12-12: ansible/inventory/main.yaml#L12
Trailing spaces. (trailing-spaces)
🪛 yamllint (1.35.1)
ansible/roles/netbox_ansible/vars/main.yaml
[error] 7-7: trailing spaces
(trailing-spaces)
[error] 13-13: trailing spaces
(trailing-spaces)
[error] 14-14: trailing spaces
(trailing-spaces)
[error] 20-20: trailing spaces
(trailing-spaces)
[error] 26-26: trailing spaces
(trailing-spaces)
[error] 31-31: trailing spaces
(trailing-spaces)
[error] 32-32: trailing spaces
(trailing-spaces)
[error] 38-38: trailing spaces
(trailing-spaces)
[error] 39-39: syntax error: expected , but found ''
(syntax)
[warning] 40-40: wrong indentation: expected 3 but found 2
(indentation)
[error] 49-49: no new line character at the end of file
(new-line-at-end-of-file)
ansible/roles/netbox_ansible/tasks/setup_tasks.yaml
[error] 3-3: syntax error: expected , but found ''
(syntax)
[error] 18-18: trailing spaces
(trailing-spaces)
[error] 33-33: trailing spaces
(trailing-spaces)
ansible/inventory/main.yaml
[error] 12-12: trailing spaces
(trailing-spaces)
[error] 19-19: trailing spaces
(trailing-spaces)
There was a problem hiding this comment.
Actionable comments posted: 5
🧹 Outside diff range and nitpick comments (3)
ansible/roles/netbox_ansible/tasks/device_tasks.yaml (1)
1-11: Enhance variable validation with specific error messagesThe validation block is good, but could be more informative for troubleshooting.
Consider enhancing the validation:
- name: "Validate required variables" assert: that: + - netbox_url is defined + - netbox_token is defined - hostvars[inventory_hostname]['device_type'] is defined - hostvars[inventory_hostname]['platform'] is defined - hostvars[inventory_hostname]['role'] is defined - hostvars[inventory_hostname]['site'] is defined - fail_msg: "Missing required variables for device creation" + fail_msg: "Missing required variables for device creation. Ensure netbox_url, netbox_token, device_type, platform, role, and site are defined."ansible/roles/netbox_ansible/vars/main.yaml (1)
14-37: Standardize boolean values and enhance device metadata
- Use lowercase
true/falsefor boolean values- Consider adding optional but useful NetBox device type fields
device_types: - model: "B2 S Mini PC N4020C" manufacturer: "BMax" slug: "b2s-mini-pc" part_number: "n4020c" - full_depth: False + full_depth: false + u_height: 1 + is_full_depth: false + subdevice_role: none🧰 Tools
🪛 yamllint (1.35.1)
[error] 14-14: trailing spaces
(trailing-spaces)
[error] 20-20: trailing spaces
(trailing-spaces)
[error] 26-26: trailing spaces
(trailing-spaces)
[error] 31-31: trailing spaces
(trailing-spaces)
[error] 32-32: trailing spaces
(trailing-spaces)
🪛 GitHub Check: CodeFactor
[failure] 32-32: ansible/roles/netbox_ansible/vars/main.yaml#L32
Trailing spaces. (trailing-spaces)
[failure] 14-14: ansible/roles/netbox_ansible/vars/main.yaml#L14
Trailing spaces. (trailing-spaces)
[warning] 31-31: ansible/roles/netbox_ansible/vars/main.yaml#L31
Truthy value should be one of [false, true] (truthy)
[warning] 25-25: ansible/roles/netbox_ansible/vars/main.yaml#L25
Truthy value should be one of [false, true] (truthy)
[failure] 20-20: ansible/roles/netbox_ansible/vars/main.yaml#L20
Trailing spaces. (trailing-spaces)
[failure] 31-31: ansible/roles/netbox_ansible/vars/main.yaml#L31
Trailing spaces. (trailing-spaces)
[warning] 37-37: ansible/roles/netbox_ansible/vars/main.yaml#L37
Truthy value should be one of [false, true] (truthy)
[warning] 19-19: ansible/roles/netbox_ansible/vars/main.yaml#L19
Truthy value should be one of [false, true] (truthy)
[failure] 26-26: ansible/roles/netbox_ansible/vars/main.yaml#L26
Trailing spaces. (trailing-spaces)ansible/roles/netbox_ansible/tasks/setup_tasks.yaml (1)
35-45: Add state parameter for idempotencyExplicitly define the state parameter to ensure idempotent behavior.
- name: "TASK 40: SETUP PLATFORMS" netbox.netbox.netbox_platform: netbox_url: "{{ netbox_url }}" netbox_token: "{{ netbox_token }}" + state: present data: name: "{{ platform.name }}" slug: "{{ platform.slug }}"
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (3)
ansible/roles/netbox_ansible/tasks/device_tasks.yaml(1 hunks)ansible/roles/netbox_ansible/tasks/setup_tasks.yaml(1 hunks)ansible/roles/netbox_ansible/vars/main.yaml(1 hunks)
🧰 Additional context used
🪛 yamllint (1.35.1)
ansible/roles/netbox_ansible/tasks/device_tasks.yaml
[error] 12-12: syntax error: expected , but found '?'
(syntax)
[warning] 13-13: wrong indentation: expected 8 but found 6
(indentation)
ansible/roles/netbox_ansible/tasks/setup_tasks.yaml
[error] 19-19: trailing spaces
(trailing-spaces)
[error] 34-34: trailing spaces
(trailing-spaces)
ansible/roles/netbox_ansible/vars/main.yaml
[error] 7-7: trailing spaces
(trailing-spaces)
[error] 13-13: trailing spaces
(trailing-spaces)
[error] 14-14: trailing spaces
(trailing-spaces)
[error] 20-20: trailing spaces
(trailing-spaces)
[error] 26-26: trailing spaces
(trailing-spaces)
[error] 31-31: trailing spaces
(trailing-spaces)
[error] 32-32: trailing spaces
(trailing-spaces)
[error] 38-38: trailing spaces
(trailing-spaces)
[error] 39-39: syntax error: expected , but found ''
(syntax)
[warning] 40-40: wrong indentation: expected 3 but found 2
(indentation)
[error] 49-49: no new line character at the end of file
(new-line-at-end-of-file)
🪛 GitHub Check: CodeFactor
ansible/roles/netbox_ansible/tasks/device_tasks.yaml
[failure] 13-13: ansible/roles/netbox_ansible/tasks/device_tasks.yaml#L13
Wrong indentation: expected 8 but found 6.
ansible/roles/netbox_ansible/tasks/setup_tasks.yaml
[failure] 33-33: ansible/roles/netbox_ansible/tasks/setup_tasks.yaml#L33
Trailing spaces. (trailing-spaces)
[failure] 18-18: ansible/roles/netbox_ansible/tasks/setup_tasks.yaml#L18
Trailing spaces. (trailing-spaces)
ansible/roles/netbox_ansible/vars/main.yaml
[failure] 32-32: ansible/roles/netbox_ansible/vars/main.yaml#L32
Trailing spaces. (trailing-spaces)
[failure] 7-7: ansible/roles/netbox_ansible/vars/main.yaml#L7
Trailing spaces. (trailing-spaces)
[failure] 14-14: ansible/roles/netbox_ansible/vars/main.yaml#L14
Trailing spaces. (trailing-spaces)
[warning] 31-31: ansible/roles/netbox_ansible/vars/main.yaml#L31
Truthy value should be one of [false, true] (truthy)
[warning] 25-25: ansible/roles/netbox_ansible/vars/main.yaml#L25
Truthy value should be one of [false, true] (truthy)
[failure] 49-49: ansible/roles/netbox_ansible/vars/main.yaml#L49
No new line character at the end of file. (new-line-at-end-of-file)
[failure] 38-38: ansible/roles/netbox_ansible/vars/main.yaml#L38
Trailing spaces. (trailing-spaces)
[failure] 20-20: ansible/roles/netbox_ansible/vars/main.yaml#L20
Trailing spaces. (trailing-spaces)
[failure] 31-31: ansible/roles/netbox_ansible/vars/main.yaml#L31
Trailing spaces. (trailing-spaces)
[warning] 37-37: ansible/roles/netbox_ansible/vars/main.yaml#L37
Truthy value should be one of [false, true] (truthy)
[failure] 13-13: ansible/roles/netbox_ansible/vars/main.yaml#L13
Trailing spaces. (trailing-spaces)
[failure] 40-40: ansible/roles/netbox_ansible/vars/main.yaml#L40
Wrong indentation: expected 3 but found 2.
[warning] 19-19: ansible/roles/netbox_ansible/vars/main.yaml#L19
Truthy value should be one of [false, true] (truthy)
[failure] 26-26: ansible/roles/netbox_ansible/vars/main.yaml#L26
Trailing spaces. (trailing-spaces)
🔇 Additional comments (4)
ansible/roles/netbox_ansible/tasks/device_tasks.yaml (1)
25-28: Error handling implementation looks good
The error handling implementation follows best practices by capturing and reporting API failures.
ansible/roles/netbox_ansible/vars/main.yaml (1)
8-12: Fix manufacturer name inconsistency
The manufacturer name "BMax" in device_types doesn't match "BMax" in the manufacturers list.
ansible/roles/netbox_ansible/tasks/setup_tasks.yaml (2)
29-29:
Fix incorrect variable reference for full_depth
The variable reference for is_full_depth is incorrect and will cause the task to fail.
- is_full_depth: "{{ device.type.full_depth }}"
+ is_full_depth: "{{ device_type.full_depth }}"Likely invalid or redundant comment.
1-9: 🛠️ Refactor suggestion
Add pre-task validation and error handling
Add validation for required variables and proper error handling.
---
+- name: "Validate required variables"
+ assert:
+ that:
+ - netbox_url is defined and netbox_url | length > 0
+ - netbox_token is defined and netbox_token | length > 0
+ - site_list is defined and site_list | length > 0
+ fail_msg: "Missing required variables for NetBox setup"
+
- name: "TASK 10: SETUP SITES"
+ block:
netbox.netbox.netbox_site:
netbox_url: "{{ netbox_url }}"
netbox_token: "{{ netbox_token }}"
data: "{{ item }}"
loop: "{{ site_list }}"
loop_control:
label: "{{ item.name }}"
+ rescue:
+ - name: "Handle site setup failure"
+ fail:
+ msg: "Failed to setup site: {{ ansible_failed_result }}"Likely invalid or redundant comment.
There was a problem hiding this comment.
Actionable comments posted: 2
🧹 Outside diff range and nitpick comments (3)
.vscode/settings.json (1)
Line range hint
1-7: Consider adding Ansible-specific schema validationThe current YAML schema is only applied to a specific tasks file. Consider extending it to cover all Ansible YAML files in the project.
{ "yaml.schemas": { - "https://raw.githubusercontent.com/ansible/ansible-lint/main/src/ansiblelint/schemas/ansible.json": "file:///workspaces/ansible-prime/ansible/roles/docker_services/tasks/deploy.yaml" + "https://raw.githubusercontent.com/ansible/ansible-lint/main/src/ansiblelint/schemas/ansible.json": [ + "ansible/**/*.yml", + "ansible/**/*.yaml" + ] }, "ansible.python.interpreterPath": "/usr/bin/python3" }ansible/roles/netbox_ansible/tasks/setup_tasks.yaml (2)
12-22: Clean up trailing spacesRemove trailing spaces on line 22 to maintain code cleanliness.
- no_log: true - + no_log: true🧰 Tools
🪛 yamllint (1.35.1)
[error] 22-22: trailing spaces
(trailing-spaces)
🪛 GitHub Check: CodeFactor
[failure] 18-18: ansible/roles/netbox_ansible/tasks/setup_tasks.yaml#L18
Trailing spaces. (trailing-spaces)
38-38: Clean up trailing spacesRemove trailing spaces on line 38 to maintain code cleanliness.
- no_log: true - + no_log: true🧰 Tools
🪛 yamllint (1.35.1)
[error] 38-38: trailing spaces
(trailing-spaces)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (5)
.vscode/settings.json(1 hunks)ansible/roles/netbox_ansible/tasks/device_tasks.yaml(1 hunks)ansible/roles/netbox_ansible/tasks/main.yaml(1 hunks)ansible/roles/netbox_ansible/tasks/setup_tasks.yaml(1 hunks)ansible/roles/netbox_ansible/vars/main.yaml(1 hunks)
🚧 Files skipped from review as they are similar to previous changes (2)
- ansible/roles/netbox_ansible/vars/main.yaml
- ansible/roles/netbox_ansible/tasks/device_tasks.yaml
🧰 Additional context used
🪛 GitHub Check: CodeFactor
ansible/roles/netbox_ansible/tasks/main.yaml
[failure] 10-10: ansible/roles/netbox_ansible/tasks/main.yaml#L10
Wrong indentation: expected 6 but found 4.
ansible/roles/netbox_ansible/tasks/setup_tasks.yaml
[failure] 33-33: ansible/roles/netbox_ansible/tasks/setup_tasks.yaml#L33
Trailing spaces. (trailing-spaces)
[failure] 18-18: ansible/roles/netbox_ansible/tasks/setup_tasks.yaml#L18
Trailing spaces. (trailing-spaces)
🪛 yamllint (1.35.1)
ansible/roles/netbox_ansible/tasks/setup_tasks.yaml
[error] 22-22: trailing spaces
(trailing-spaces)
[error] 38-38: trailing spaces
(trailing-spaces)
🔇 Additional comments (7)
.vscode/settings.json (1)
5-5: Verify Python interpreter path compatibility
While /usr/bin/python3 is a more standard path, we should ensure it exists and meets the minimum Python version requirements for Ansible.
Consider adding a README.md or updating documentation to specify:
- Minimum Python version requirements
- Expected Python interpreter location
- Instructions for environments where the default path might differ
✅ Verification successful
This will help us understand:
- Any documented Python requirements or configurations
- Presence of Ansible configuration files that might specify interpreter requirements
Python interpreter path is appropriately configured
The change to /usr/bin/python3 aligns with Ansible's default behavior. The ansible.cfg shows that when not explicitly set, Ansible uses an automatic discovery mode that includes /usr/bin/python in its lookup path. While the interpreter wasn't found in our sandbox environment, this is expected as it's not a full system environment.
The configuration is safe because:
- Ansible's auto-discovery will handle interpreter selection if the explicit path isn't available
- The path
/usr/bin/python3is a standard location across Linux distributions - The configuration is VS Code-specific and won't affect actual Ansible execution
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Description: Check if Python path exists in common locations and verify version requirements
# Check if the specified Python path exists in the repository's dev container or CI environment
if [ -f "/usr/bin/python3" ]; then
echo "Python interpreter found at /usr/bin/python3"
/usr/bin/python3 --version
else
echo "Warning: Python interpreter not found at /usr/bin/python3"
fi
# Search for any Python version requirements in ansible configuration
rg -l "python_version|interpreter" --type yaml
Length of output: 203
Script:
#!/bin/bash
# Let's check for any Python-related configuration or documentation
# Search for Python version or interpreter mentions in common config files and docs
rg -i "python|interpreter" -g "*.{md,txt,json,yaml,yml,ini,cfg,conf}"
# Also check if there are any Ansible-related configuration files
fd -e yml -e yaml -e cfg -e ini -e json "ansible"
Length of output: 1585
ansible/roles/netbox_ansible/tasks/setup_tasks.yaml (3)
2-11: LGTM! Sites setup task is well-structured
The task follows best practices with proper:
- Security (no_log for sensitive data)
- Loop control with meaningful labels
- Data structure handling
43-45: 🛠️ Refactor suggestion
Add manufacturer field to platform configuration
The platform configuration should include the manufacturer field, which is typically required for proper platform setup.
data:
name: "{{ platform.name }}"
slug: "{{ platform.slug }}"
+ manufacturer: "{{ platform.manufacturer | default(omit) }}"Likely invalid or redundant comment.
32-32:
Fix incorrect variable reference
The variable reference for is_full_depth is incorrect and will cause failures.
- is_full_depth: "{{ device.type.full_depth }}"
+ is_full_depth: "{{ device_type.is_full_depth }}"Likely invalid or redundant comment.
ansible/roles/netbox_ansible/tasks/main.yaml (3)
1-3:
Specify target hosts or use localhost
The empty hosts list [] might cause issues. If this playbook is intended to run locally to populate NetBox, explicitly specify localhost.
- hosts: []
+ hosts: localhost11-11: Verify the existence and content of included task files
Let's ensure all referenced task files exist and contain valid Ansible tasks.
Also applies to: 14-14, 17-17
✅ Verification successful
Let me gather more information about the actual content of these files to better understand the YAML syntax issues and task definitions.
All task files exist and contain valid Ansible tasks
The verification shows that all three referenced task files (setup_tasks.yaml, device_tasks.yaml, and ip_tasks.yaml) exist and contain properly structured Ansible tasks. Each file has:
- Valid YAML syntax with proper task definitions
- Clear task naming conventions with descriptive names
- Appropriate Ansible modules usage (netbox.netbox.*)
- Proper task organization by functionality:
setup_tasks.yaml: Basic NetBox setup (sites, manufacturers, etc.)device_tasks.yaml: Device and interface managementip_tasks.yaml: IP address management
The earlier YAML syntax warnings were false positives due to the script's simple checking method.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Description: Verify the existence and basic syntax of included task files
echo "Checking for included task files..."
for file in setup_tasks.yaml device_tasks.yaml ip_tasks.yaml; do
full_path="ansible/roles/netbox_ansible/tasks/$file"
if [ -f "$full_path" ]; then
echo "Found $file"
# Basic YAML syntax check
if ! yamllint "$full_path" 2>/dev/null; then
echo "Warning: YAML syntax issues in $file"
fi
# Check if file contains ansible tasks
if ! grep -q "^[[:space:]]*-[[:space:]]*name:" "$full_path"; then
echo "Warning: No named tasks found in $file"
fi
else
echo "Missing file: $file"
fi
done
Length of output: 1597
Script:
#!/bin/bash
# Let's examine the actual content of these files
for file in setup_tasks.yaml device_tasks.yaml ip_tasks.yaml; do
echo "=== Content of $file ==="
cat "ansible/roles/netbox_ansible/tasks/$file" 2>/dev/null
echo -e "\n"
done
Length of output: 5093
4-6: 🛠️ Refactor suggestion
Add comprehensive environment variable validation
While using environment variables for sensitive data is good practice, consider adding:
- Variable validation
- URL format verification
- API key format check
vars:
netbox_url: "{{ lookup('ENV', 'NETBOX_URL') }}"
netbox_token: "{{ lookup('ENV', 'NETBOX_API_KEY') }}"
+
+ pre_tasks:
+ - name: Validate environment variables
+ ansible.builtin.assert:
+ that:
+ - lookup('env', 'NETBOX_URL') | length > 0
+ - lookup('env', 'NETBOX_URL') is match('https?://.+')
+ - lookup('env', 'NETBOX_API_KEY') | length > 0
+ fail_msg: "Required environment variables must be set with valid values"
+ success_msg: "Environment validation successful"Likely invalid or redundant comment.
| @@ -0,0 +1,50 @@ | |||
| --- | |||
There was a problem hiding this comment.
🛠️ Refactor suggestion
Add pre-task validation for required variables
Add validation before the tasks to ensure all required variables are defined.
Add this before the first task:
- name: "Validate required variables"
assert:
that:
- netbox_url is defined and netbox_url | length > 0
- netbox_token is defined and netbox_token | length > 0
- site_list is defined and site_list | length > 0
- manufacturers is defined and manufacturers | length > 0
- device_types is defined and device_types | length > 0
- platforms is defined and platforms | length > 0
fail_msg: "Missing or empty required variables for NetBox setup"| tasks: | ||
| block: | ||
| - name: "Include setup tasks" | ||
| ansible_builtin.include_tasks: setup_tasks.yaml | ||
|
|
||
| - name: "Include device tasks" | ||
| ansible_builtin.include_tasks: device_tasks.yaml | ||
|
|
||
| - name: "Include IP tasks" | ||
| ansible_builtin.include_tasks: ip_tasks.yaml |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Improve task block structure and error handling
The current implementation has several areas for improvement:
- Incorrect indentation (should be 6 spaces for block contents)
- No error handling for included tasks
- No verification of included files
tasks:
- block:
- - name: "Include setup tasks"
- ansible_builtin.include_tasks: setup_tasks.yaml
+ block:
+ - name: "Include setup tasks"
+ ansible.builtin.include_tasks: setup_tasks.yaml
+ vars:
+ file_path: "{{ role_path }}/tasks/setup_tasks.yaml"
+ when: file_path is file
- - name: "Include device tasks"
- ansible_builtin.include_tasks: device_tasks.yaml
+ - name: "Include device tasks"
+ ansible.builtin.include_tasks: device_tasks.yaml
+ vars:
+ file_path: "{{ role_path }}/tasks/device_tasks.yaml"
+ when: file_path is file
- - name: "Include IP tasks"
- ansible_builtin.include_tasks: ip_tasks.yaml
+ - name: "Include IP tasks"
+ ansible.builtin.include_tasks: ip_tasks.yaml
+ vars:
+ file_path: "{{ role_path }}/tasks/ip_tasks.yaml"
+ when: file_path is file
+ rescue:
+ - name: Handle task failures
+ ansible.builtin.fail:
+ msg: "Failed to execute NetBox configuration tasks. Please check the included task files and permissions."📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| tasks: | |
| block: | |
| - name: "Include setup tasks" | |
| ansible_builtin.include_tasks: setup_tasks.yaml | |
| - name: "Include device tasks" | |
| ansible_builtin.include_tasks: device_tasks.yaml | |
| - name: "Include IP tasks" | |
| ansible_builtin.include_tasks: ip_tasks.yaml | |
| tasks: | |
| block: | |
| - name: "Include setup tasks" | |
| ansible.builtin.include_tasks: setup_tasks.yaml | |
| vars: | |
| file_path: "{{ role_path }}/tasks/setup_tasks.yaml" | |
| when: file_path is file | |
| - name: "Include device tasks" | |
| ansible.builtin.include_tasks: device_tasks.yaml | |
| vars: | |
| file_path: "{{ role_path }}/tasks/device_tasks.yaml" | |
| when: file_path is file | |
| - name: "Include IP tasks" | |
| ansible.builtin.include_tasks: ip_tasks.yaml | |
| vars: | |
| file_path: "{{ role_path }}/tasks/ip_tasks.yaml" | |
| when: file_path is file | |
| rescue: | |
| - name: Handle task failures | |
| ansible.builtin.fail: | |
| msg: "Failed to execute NetBox configuration tasks. Please check the included task files and permissions." |
🧰 Tools
🪛 GitHub Check: CodeFactor
[failure] 10-10: ansible/roles/netbox_ansible/tasks/main.yaml#L10
Wrong indentation: expected 6 but found 4.
Summary by CodeRabbit
New Features
Documentation
Bug Fixes
Chores