MarlinFirmware · classicrocker883 · Mar 28, 2024 · Mar 28, 2024 · Apr 1, 2024 · Apr 1, 2024
diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp
@@ -79,6 +79,8 @@
     #include "lcd/e3v2/creality/dwin.h"
   #elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
     #include "lcd/e3v2/jyersui/dwin.h"
+  #elif ENABLED(DWIN_LCD_PROUI)
+    #include "lcd/extui/ui_api.h"
   #endif
 #endif
 
@@ -1596,11 +1598,11 @@ void setup() {
     SERIAL_ECHO_TERNARY(err, "BL24CXX Check ", "failed", "succeeded", "!\n");
   #endif
 
-  #if ENABLED(DWIN_CREALITY_LCD)
+  #if HAS_DWIN_E3V2_BASIC
     SETUP_RUN(dwinInitScreen());
   #endif
 
-  #if HAS_SERVICE_INTERVALS && DISABLED(DWIN_CREALITY_LCD)
+  #if HAS_SERVICE_INTERVALS && !HAS_DWIN_E3V2_BASIC
     SETUP_RUN(ui.reset_status(true));  // Show service messages or keep current status
   #endif
 

diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
@@ -1267,6 +1267,7 @@ void unified_bed_leveling::restore_ubl_active_state(const bool is_done/*=true*/)
   set_bed_leveling_enabled(ubl_state_at_invocation);
 
   if (is_done) {
+    TERN_(DWIN_LCD_PROUI, dwinLevelingDone());
     TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
   }
 }

diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp
@@ -62,6 +62,8 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../lcd/e3v2/proui/dwin_popup.h"
 #endif
 
 #include "../lcd/marlinui.h"
@@ -531,6 +533,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
   // Wait for filament insert by user and press button
   KEEPALIVE_STATE(PAUSED_FOR_USER);
   TERN_(HOST_PROMPT_SUPPORT, hostui.continue_prompt(GET_TEXT_F(MSG_NOZZLE_PARKED)));
+  TERN_(DWIN_LCD_PROUI, LCD_MESSAGE(MSG_NOZZLE_PARKED));
   TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_NOZZLE_PARKED)));
   wait_for_user = true;    // LCD click or M108 will clear this
   while (wait_for_user) {

diff --git a/Marlin/src/gcode/bedlevel/abl/G29.cpp b/Marlin/src/gcode/bedlevel/abl/G29.cpp
@@ -51,6 +51,9 @@
   #include "../../../lcd/extui/ui_api.h"
 #elif ENABLED(DWIN_CREALITY_LCD)
   #include "../../../lcd/e3v2/creality/dwin.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../../../lcd/e3v2/proui/dwin.h"
+  #include "../../../lcd/e3v2/proui/meshviewer.h"
 #endif
 
 #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
@@ -81,7 +84,7 @@ static void pre_g29_return(const bool retry, const bool did) {
   }
   #if DISABLED(G29_RETRY_AND_RECOVER)
     if (!retry || did) {
-      TERN_(DWIN_CREALITY_LCD, dwinLevelingDone());
+      TERN_(HAS_DWIN_E3V2_BASIC, dwinLevelingDone());
       TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
     }
   #endif
@@ -326,6 +329,7 @@ G29_TYPE GcodeSuite::G29() {
           set_bed_leveling_enabled(false);
           bedlevel.z_values[i][j] = rz;
           bedlevel.refresh_bed_level();
+          TERN_(DWIN_LCD_PROUI, meshViewer.drawMeshPoint(i, j, rz));
           TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(i, j, rz));
           if (abl.reenable) {
             set_bed_leveling_enabled(true);
@@ -430,6 +434,8 @@ G29_TYPE GcodeSuite::G29() {
     #if ENABLED(AUTO_BED_LEVELING_3POINT)
       if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> 3-point Leveling");
       points[0].z = points[1].z = points[2].z = 0;  // Probe at 3 arbitrary points
+    #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
+      TERN_(DWIN_LCD_PROUI, dwinLevelingStart());
     #endif
 
     TERN_(EXTENSIBLE_UI, ExtUI::onLevelingStart());
@@ -439,7 +445,13 @@ G29_TYPE GcodeSuite::G29() {
 
       #if ENABLED(PREHEAT_BEFORE_LEVELING)
         if (!abl.dryrun) probe.preheat_for_probing(LEVELING_NOZZLE_TEMP,
-          TERN(EXTENSIBLE_UI, ExtUI::getLevelingBedTemp(), LEVELING_BED_TEMP)
+          #if ALL(DWIN_LCD_PROUI, HAS_HEATED_BED)
+            hmiData.bedLevT
+          #elif ENABLED(EXTENSIBLE_UI)
+            ExtUI::getLevelingBedTemp()
+          #else
+            LEVELING_BED_TEMP
+          #endif
         );
       #endif
     }
@@ -567,6 +579,7 @@ G29_TYPE GcodeSuite::G29() {
 
         const float newz = abl.measured_z + abl.Z_offset;
         abl.z_values[abl.meshCount.x][abl.meshCount.y] = newz;
+        TERN_(DWIN_LCD_PROUI, meshViewer.drawMeshPoint(abl.meshCount.x, abl.meshCount.y, newz));
         TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(abl.meshCount, newz));
 
         if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM_P(PSTR("Save X"), abl.meshCount.x, SP_Y_STR, abl.meshCount.y, SP_Z_STR, abl.measured_z + abl.Z_offset);
@@ -773,6 +786,7 @@ G29_TYPE GcodeSuite::G29() {
 
             const float z = abl.measured_z + abl.Z_offset;
             abl.z_values[abl.meshCount.x][abl.meshCount.y] = z;
+            TERN_(DWIN_LCD_PROUI, meshViewer.drawMeshPoint(abl.meshCount.x, abl.meshCount.y, z));
             TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(abl.meshCount, z));
 
           #endif
@@ -848,7 +862,8 @@ G29_TYPE GcodeSuite::G29() {
       else {
         bedlevel.set_grid(abl.gridSpacing, abl.probe_position_lf);
         COPY(bedlevel.z_values, abl.z_values);
-        TERN_(IS_KINEMATIC, bedlevel.extrapolate_unprobed_bed_level());
+        if (parser.boolval('K')) bedlevel.extrapolate_unprobed_bed_level();
+        else if (ENABLED(DWIN_LCD_PROUI) || ENABLED(IS_KINEMATIC)) bedlevel.extrapolate_unprobed_bed_level();
         bedlevel.refresh_bed_level();
 
         bedlevel.print_leveling_grid();
@@ -984,7 +999,7 @@ G29_TYPE GcodeSuite::G29() {
   // Restore state after probing
   if (!faux) restore_feedrate_and_scaling();
 
-  TERN_(HAS_BED_PROBE, probe.move_z_after_probing());
+  TERN_(Z_AFTER_PROBING, probe.move_z_after_probing());
 
   #ifdef EVENT_GCODE_AFTER_G29
     if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Z Probe End Script: ", EVENT_GCODE_AFTER_G29);

diff --git a/Marlin/src/gcode/bedlevel/abl/M421.cpp b/Marlin/src/gcode/bedlevel/abl/M421.cpp
@@ -33,6 +33,8 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../../../lcd/e3v2/proui/dwin.h"
 #endif
 
 /**
@@ -59,6 +61,7 @@ void GcodeSuite::M421() {
       for (uint8_t x = sx; x <= ex; ++x) {
         for (uint8_t y = sy; y <= ey; ++y) {
           bedlevel.z_values[x][y] = zval + (hasQ ? bedlevel.z_values[x][y] : 0);
+          TERN_(DWIN_LCD_PROUI, dwinMeshUpdate(x, y, bedlevel.z_values[x][y]);)
           TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(x, y, bedlevel.z_values[x][y]));
         }
       }

diff --git a/Marlin/src/gcode/bedlevel/mbl/G29.cpp b/Marlin/src/gcode/bedlevel/mbl/G29.cpp
@@ -141,6 +141,7 @@ void GcodeSuite::G29() {
 
         queue.inject(F("G29S2"));
 
+        TERN_(DWIN_LCD_PROUI, dwinLevelingStart());
         TERN_(EXTENSIBLE_UI, ExtUI::onLevelingStart());
 
         return;
@@ -166,6 +167,7 @@ void GcodeSuite::G29() {
       else {
         // Save Z for the previous mesh position
         bedlevel.set_zigzag_z(mbl_probe_index - 1, current_position.z);
+        TERN_(DWIN_LCD_PROUI, dwinPointUpdate(_MIN(mbl_probe_index, GRID_MAX_POINTS), int(GRID_MAX_POINTS), current_position.z));
         TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(ix, iy, current_position.z));
         SET_SOFT_ENDSTOP_LOOSE(false);
       }
@@ -232,6 +234,7 @@ void GcodeSuite::G29() {
 
       if (parser.seenval('Z')) {
         bedlevel.z_values[ix][iy] = parser.value_linear_units();
+        TERN_(DWIN_LCD_PROUI, dwinMeshUpdate(ix, iy, bedlevel.z_values[ix][iy]));
         TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(ix, iy, bedlevel.z_values[ix][iy]));
       }
       else

diff --git a/Marlin/src/gcode/bedlevel/ubl/M421.cpp b/Marlin/src/gcode/bedlevel/ubl/M421.cpp
@@ -33,6 +33,8 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../../../lcd/e3v2/proui/dwin.h"
 #endif
 
 /**
@@ -66,6 +68,7 @@ void GcodeSuite::M421() {
   else {
     float &zval = bedlevel.z_values[ij.x][ij.y];                          // Altering this Mesh Point
     zval = hasN ? NAN : parser.value_linear_units() + (hasQ ? zval : 0);  // N=NAN, Z=NEWVAL, or Q=ADDVAL
+    TERN_(DWIN_LCD_PROUI, dwinMeshUpdate(ij.x, ij.y, zval));
     TERN_(EXTENSIBLE_UI, ExtUI::onMeshUpdate(ij.x, ij.y, zval));          // Ping ExtUI in case it's showing the mesh
   }
 }

diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp
@@ -52,6 +52,8 @@
   #include "../../lcd/extui/ui_api.h"
 #elif ENABLED(DWIN_CREALITY_LCD)
   #include "../../lcd/e3v2/creality/dwin.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../../lcd/e3v2/proui/dwin.h"
 #endif
 
 #if ENABLED(LASER_FEATURE)
@@ -221,7 +223,7 @@ void GcodeSuite::G28() {
     set_and_report_grblstate(M_HOMING);
   #endif
 
-  TERN_(DWIN_CREALITY_LCD, dwinHomingStart());
+  TERN_(HAS_DWIN_E3V2_BASIC, dwinHomingStart());
   TERN_(EXTENSIBLE_UI, ExtUI::onHomingStart());
 
   planner.synchronize();          // Wait for planner moves to finish!
@@ -650,7 +652,7 @@ void GcodeSuite::G28() {
 
   ui.refresh();
 
-  TERN_(DWIN_CREALITY_LCD, dwinHomingDone());
+  TERN_(HAS_DWIN_E3V2_BASIC, dwinHomingDone());
   TERN_(EXTENSIBLE_UI, ExtUI::onHomingDone());
 
   report_current_position();

diff --git a/Marlin/src/gcode/calibrate/M48.cpp b/Marlin/src/gcode/calibrate/M48.cpp
@@ -58,7 +58,11 @@
 
 void GcodeSuite::M48() {
 
-  if (homing_needed_error()) return;
+  #if ENABLED(DWIN_LCD_PROUI)
+    TERN_(ADVANCED_PAUSE_FEATURE, dwinPopupPause(GET_TEXT_F(MSG_M48_TEST));)
+  #endif
+
+  if (homing_needed_error()) TERN(DWIN_LCD_PROUI, return hmiReturnScreen(), return);
 
   const int8_t verbose_level = parser.byteval('V', 1);
   if (!WITHIN(verbose_level, 0, 4)) {
@@ -274,6 +278,7 @@ void GcodeSuite::M48() {
   TERN_(HAS_PTC, ptc.set_enabled(true));
 
   report_current_position();
+  TERN_(DWIN_LCD_PROUI, hmiReturnScreen();)
 }
 
 #endif // Z_MIN_PROBE_REPEATABILITY_TEST
diff --git a/Marlin/src/gcode/config/M302.cpp b/Marlin/src/gcode/config/M302.cpp
@@ -28,6 +28,8 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../../lcd/e3v2/proui/dwin.h"
 #endif
 
 #include "../../module/temperature.h"
@@ -51,6 +53,7 @@ void GcodeSuite::M302() {
   const bool seen_S = parser.seen('S');
   if (seen_S) {
     thermalManager.extrude_min_temp = parser.value_celsius();
+    TERN_(DWIN_LCD_PROUI, hmiData.extMinT = thermalManager.extrude_min_temp);
     TERN_(EXTENSIBLE_UI, ExtUI::onSetMinExtrusionTemp(thermalManager.extrude_min_temp));
   }
 

diff --git a/Marlin/src/gcode/control/M997.cpp b/Marlin/src/gcode/control/M997.cpp
@@ -26,13 +26,16 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../../lcd/e3v2/proui/dwin.h"
 #endif
 
 /**
  * M997: Perform in-application firmware update
  */
 void GcodeSuite::M997() {
 
+  TERN_(DWIN_LCD_PROUI, dwinRebootScreen());
   TERN_(EXTENSIBLE_UI, ExtUI::onFirmwareFlash());
 
   flashFirmware(parser.intval('S'));

diff --git a/Marlin/src/gcode/feature/powerloss/M1000.cpp b/Marlin/src/gcode/feature/powerloss/M1000.cpp
@@ -39,6 +39,8 @@
   #include "../../../lcd/e3v2/creality/dwin.h"
 #elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
   #include "../../../lcd/e3v2/jyersui/dwin.h" // Temporary fix until it can be better implemented
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../../../lcd/e3v2/proui/dwin.h"
 #endif
 
 #define DEBUG_OUT ENABLED(DEBUG_POWER_LOSS_RECOVERY)

diff --git a/Marlin/src/gcode/lcd/M0_M1.cpp b/Marlin/src/gcode/lcd/M0_M1.cpp
@@ -35,6 +35,8 @@
   #include "../../lcd/marlinui.h"
 #elif ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../../lcd/e3v2/proui/dwin_popup.h"
 #endif
 
 #if ENABLED(HOST_PROMPT_SUPPORT)
@@ -63,14 +65,14 @@ void GcodeSuite::M0_M1() {
       #endif
     }
 
-  #elif ENABLED(DWIN_LCD_PROUI) // ExtUI with icon, string, button title
+  #elif ENABLED(DWIN_LCD_PROUI)
 
     if (parser.string_arg)
-      ExtUI::onUserConfirmRequired(ICON_Continue_1, parser.string_arg, GET_TEXT_F(MSG_USERWAIT));
+      dwinPopupContinue(ICON_Continue_1, parser.string_arg, GET_TEXT_F(MSG_USERWAIT));
     else
-      ExtUI::onUserConfirmRequired(ICON_Stop_1, GET_TEXT_F(MSG_STOPPED), GET_TEXT_F(MSG_USERWAIT));
+      dwinPopupContinue(ICON_Stop_1, GET_TEXT_F(MSG_STOPPED), GET_TEXT_F(MSG_USERWAIT));
 
-  #elif ENABLED(EXTENSIBLE_UI)
+  #elif ENABLED(EXTENSIBLE_UI) // ExtUI with icon, string, button title
 
     if (parser.string_arg)
       ExtUI::onUserConfirmRequired(parser.string_arg); // String in an SRAM buffer

diff --git a/Marlin/src/gcode/probe/G30.cpp b/Marlin/src/gcode/probe/G30.cpp
@@ -34,7 +34,7 @@
   #include "../../feature/probe_temp_comp.h"
 #endif
 
-#if ANY(DWIN_CREALITY_LCD_JYERSUI, EXTENSIBLE_UI)
+#if ANY(DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI, EXTENSIBLE_UI)
   #define VERBOSE_SINGLE_PROBE
 #endif
 

diff --git a/Marlin/src/gcode/sd/M1001.cpp b/Marlin/src/gcode/sd/M1001.cpp
@@ -49,6 +49,8 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../../lcd/e3v2/proui/dwin.h"
 #endif
 
 #if ENABLED(HOST_ACTION_COMMANDS)

diff --git a/Marlin/src/gcode/sd/M524.cpp b/Marlin/src/gcode/sd/M524.cpp
@@ -29,14 +29,20 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../../lcd/marlinui.h"
 #endif
 
 /**
  * M524: Abort the current SD print job (started with M24)
  */
 void GcodeSuite::M524() {
 
-  #if ENABLED(EXTENSIBLE_UI)
+  #if ENABLED(DWIN_LCD_PROUI)
+
+    ui.abort_print();
+
+  #elif ENABLED(EXTENSIBLE_UI)
 
     ExtUI::stopPrint(); // Calls ui.abort_print() which does the same as below
 

diff --git a/Marlin/src/gcode/temp/M303.cpp b/Marlin/src/gcode/temp/M303.cpp
@@ -31,6 +31,8 @@
 
 #if ENABLED(EXTENSIBLE_UI)
   #include "../../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../../lcd/e3v2/proui/dwin.h"
 #endif
 
 /**
@@ -66,6 +68,7 @@ void GcodeSuite::M303() {
     default:
       SERIAL_ECHOPGM(STR_PID_AUTOTUNE);
       SERIAL_ECHOLNPGM(STR_PID_BAD_HEATER_ID);
+      TERN_(DWIN_LCD_PROUI, dwinPIDTuning(PID_BAD_HEATER_ID);)
       TERN_(EXTENSIBLE_UI, ExtUI::onPIDTuning(ExtUI::pidresult_t::PID_BAD_HEATER_ID));
       return;
   }
@@ -76,6 +79,7 @@ void GcodeSuite::M303() {
   const celsius_t temp = seenS ? parser.value_celsius() : default_temp;
   const bool u = parser.boolval('U');
 
+  TERN_(DWIN_LCD_PROUI, dwinStartM303(c, hid, temp));
   TERN_(EXTENSIBLE_UI, ExtUI::onStartM303(c, hid, temp));
 
   IF_DISABLED(BUSY_WHILE_HEATING, KEEPALIVE_STATE(NOT_BUSY));

diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
@@ -1060,7 +1060,7 @@
 #endif
 
 // Extensible UI serial touch screens. (See src/lcd/extui)
-#if ANY(HAS_DGUS_LCD, MALYAN_LCD, ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, NEXTION_TFT, TOUCH_UI_FTDI_EVE, DWIN_LCD_PROUI)
+#if ANY(HAS_DGUS_LCD, MALYAN_LCD, ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, NEXTION_TFT, TOUCH_UI_FTDI_EVE)
   #define IS_EXTUI 1 // Just for sanity check.
   #define EXTENSIBLE_UI
 #endif