✨ INPUT_SHAPING_Z

MarlinFirmware/Marlin#27073 Co-Authored-By: Jonathan Brazier <[email protected]>
MarlinFirmware · May 20, 2024 · eb68278 · eb68278
1 parent 3a42cf1
commit eb68278
Show file tree

Hide file tree

Showing 375 changed files with 2,250 additions and 375 deletions.
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -1211,7 +1211,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1220,6 +1221,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.

diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h
@@ -1202,7 +1202,8 @@
  */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
   #if ENABLED(INPUT_SHAPING_X)
     #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
     #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1212,10 @@
     #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
     #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
   #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
   //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
   //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
   //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.