🔥 Drop TMC26X support

MarlinFirmware/Marlin#26770
MarlinFirmware · May 12, 2024 · d0425ea · d0425ea
1 parent c771a54
commit d0425ea
Show file tree

Hide file tree

Showing 368 changed files with 1,104 additions and 2,208 deletions.
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -2970,15 +2970,12 @@
  *    Some boards have simple jumper connections! See your board's documentation.
  *  - These drivers can also be used with Hardware Serial.
  *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
  * The TMCStepper library is required for other TMC stepper drivers.
  *   https://github.com/teemuatlut/TMCStepper
  *
  * @section tmc/config
  */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
@@ -2992,7 +2989,7 @@
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
     #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3492,7 +3489,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section i2cbus
 

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -2970,15 +2970,12 @@
  *    Some boards have simple jumper connections! See your board's documentation.
  *  - These drivers can also be used with Hardware Serial.
  *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
  * The TMCStepper library is required for other TMC stepper drivers.
  *   https://github.com/teemuatlut/TMCStepper
  *
  * @section tmc/config
  */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
@@ -2992,7 +2989,7 @@
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
     #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3492,7 +3489,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section i2cbus
 

diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h
@@ -2970,15 +2970,12 @@
  *    Some boards have simple jumper connections! See your board's documentation.
  *  - These drivers can also be used with Hardware Serial.
  *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
  * The TMCStepper library is required for other TMC stepper drivers.
  *   https://github.com/teemuatlut/TMCStepper
  *
  * @section tmc/config
  */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
@@ -2992,7 +2989,7 @@
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
     #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3492,7 +3489,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section i2cbus
 

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -2970,15 +2970,12 @@
  *    Some boards have simple jumper connections! See your board's documentation.
  *  - These drivers can also be used with Hardware Serial.
  *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
  * The TMCStepper library is required for other TMC stepper drivers.
  *   https://github.com/teemuatlut/TMCStepper
  *
  * @section tmc/config
  */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
@@ -2992,7 +2989,7 @@
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
     #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3492,7 +3489,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section i2cbus
 

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
@@ -2970,15 +2970,12 @@
  *    Some boards have simple jumper connections! See your board's documentation.
  *  - These drivers can also be used with Hardware Serial.
  *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
  * The TMCStepper library is required for other TMC stepper drivers.
  *   https://github.com/teemuatlut/TMCStepper
  *
  * @section tmc/config
  */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
@@ -2992,7 +2989,7 @@
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
     #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3492,7 +3489,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section i2cbus
 

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -2980,15 +2980,12 @@
  *    Some boards have simple jumper connections! See your board's documentation.
  *  - These drivers can also be used with Hardware Serial.
  *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
  * The TMCStepper library is required for other TMC stepper drivers.
  *   https://github.com/teemuatlut/TMCStepper
  *
  * @section tmc/config
  */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
@@ -3002,7 +2999,7 @@
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
     #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3502,7 +3499,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section i2cbus
 

diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -2971,15 +2971,12 @@
  *    Some boards have simple jumper connections! See your board's documentation.
  *  - These drivers can also be used with Hardware Serial.
  *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
  * The TMCStepper library is required for other TMC stepper drivers.
  *   https://github.com/teemuatlut/TMCStepper
  *
  * @section tmc/config
  */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
@@ -2993,7 +2990,7 @@
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
     #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3493,7 +3490,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section i2cbus
 

diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h
@@ -2970,15 +2970,12 @@
  *    Some boards have simple jumper connections! See your board's documentation.
  *  - These drivers can also be used with Hardware Serial.
  *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
  * The TMCStepper library is required for other TMC stepper drivers.
  *   https://github.com/teemuatlut/TMCStepper
  *
  * @section tmc/config
  */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
@@ -2992,7 +2989,7 @@
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
     #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3492,7 +3489,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section i2cbus
 

diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -2972,15 +2972,12 @@
  *    Some boards have simple jumper connections! See your board's documentation.
  *  - These drivers can also be used with Hardware Serial.
  *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
  * The TMCStepper library is required for other TMC stepper drivers.
  *   https://github.com/teemuatlut/TMCStepper
  *
  * @section tmc/config
  */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
@@ -2994,7 +2991,7 @@
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
     #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3494,7 +3491,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section i2cbus
 

diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
@@ -2970,15 +2970,12 @@
  *    Some boards have simple jumper connections! See your board's documentation.
  *  - These drivers can also be used with Hardware Serial.
  *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
  * The TMCStepper library is required for other TMC stepper drivers.
  *   https://github.com/teemuatlut/TMCStepper
  *
  * @section tmc/config
  */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
@@ -2992,7 +2989,7 @@
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
     #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3492,7 +3489,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section i2cbus
 

diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -2970,15 +2970,12 @@
  *    Some boards have simple jumper connections! See your board's documentation.
  *  - These drivers can also be used with Hardware Serial.
  *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
  * The TMCStepper library is required for other TMC stepper drivers.
  *   https://github.com/teemuatlut/TMCStepper
  *
  * @section tmc/config
  */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
@@ -2992,7 +2989,7 @@
     #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
     #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
     #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
     //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
     //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3492,7 +3489,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section i2cbus