🔧 FlashForge Creator Pro updates (#1047)

config/examples/FlashForge/CreatorPro/Configuration.h

@@ -63,7 +63,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "M. Baker" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "M. Baker, Queen Vinyl Da.i'gyu-Kazotetsu" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 // @section machine
@@ -127,7 +127,7 @@
 //#define BLUETOOTH
 
 // Name displayed in the LCD "Ready" message and Info menu
-#define CUSTOM_MACHINE_NAME "CreatorPro"
+#define CUSTOM_MACHINE_NAME "FF Creator Pro"
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -373,9 +373,9 @@
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.
-//#define HOTEND_OFFSET_X { 0.0, -34.00 } // (mm) relative X-offset for each nozzle
-//#define HOTEND_OFFSET_Y { 0.0, 0.00 }  // (mm) relative Y-offset for each nozzle
-//#define HOTEND_OFFSET_Z { 0.0, 0.00 }  // (mm) relative Z-offset for each nozzle
+#define HOTEND_OFFSET_X { 0.0, -34.00 } // (mm) relative X-offset for each nozzle
+#define HOTEND_OFFSET_Y { 0.0, 0.00 }  // (mm) relative Y-offset for each nozzle
+#define HOTEND_OFFSET_Z { 0.0, 0.00 }  // (mm) relative Z-offset for each nozzle
 
 // @section multi-material
 
@@ -1842,11 +1842,11 @@
 #define Y_BED_SIZE 148
 
 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
-#define X_MIN_POS -115
-#define Y_MIN_POS -84
+#define X_MIN_POS 0
+#define Y_MIN_POS -11
 #define Z_MIN_POS 0
-#define X_MAX_POS 152
-#define Y_MAX_POS 77
+#define X_MAX_POS 265
+#define Y_MAX_POS 150
 #define Z_MAX_POS 150
 //#define I_MIN_POS 0
 //#define I_MAX_POS 50
@@ -2060,7 +2060,7 @@
 //#define AUTO_BED_LEVELING_LINEAR
 //#define AUTO_BED_LEVELING_BILINEAR
 //#define AUTO_BED_LEVELING_UBL
-//#define MESH_BED_LEVELING
+#define MESH_BED_LEVELING
 
 /**
  * Commands to execute at the end of G29 probing.
@@ -2227,22 +2227,22 @@
  * Add a bed leveling sub-menu for ABL or MBL.
  * Include a guided procedure if manual probing is enabled.
  */
-//#define LCD_BED_LEVELING
+#define LCD_BED_LEVELING
 
 #if ENABLED(LCD_BED_LEVELING)
-  #define MESH_EDIT_Z_STEP  0.025 // (mm) Step size while manually probing Z axis.
-  #define LCD_PROBE_Z_RANGE 4     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
-  //#define MESH_EDIT_MENU        // Add a menu to edit mesh points
+  #define MESH_EDIT_Z_STEP  0.020 // (mm) Step size while manually probing Z axis.
+  #define LCD_PROBE_Z_RANGE 1     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
+  #define MESH_EDIT_MENU          // Add a menu to edit mesh points
 #endif
 
 // Add a menu item to move between bed corners for manual bed adjustment
-//#define LCD_BED_TRAMMING
+#define LCD_BED_TRAMMING
 
 #if ENABLED(LCD_BED_TRAMMING)
-  #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
+  #define BED_TRAMMING_INSET_LFRB { 60, 20, 60, 20 } // (mm) Left, Front, Right, Back insets
   #define BED_TRAMMING_HEIGHT      0.0        // (mm) Z height of nozzle at tramming points
-  #define BED_TRAMMING_Z_HOP       4.0        // (mm) Z raise between tramming points
-  //#define BED_TRAMMING_INCLUDE_CENTER       // Move to the center after the last corner
+  #define BED_TRAMMING_Z_HOP       3.0        // (mm) Z raise between tramming points
+  #define BED_TRAMMING_INCLUDE_CENTER         // Move to the center after the last corner
   //#define BED_TRAMMING_USE_PROBE
   #if ENABLED(BED_TRAMMING_USE_PROBE)
     #define BED_TRAMMING_PROBE_TOLERANCE 0.1  // (mm)
@@ -2267,13 +2267,13 @@
    *  |  1       2  |   | 1         4 |    | 1         2 |   | 2           |
    *  LF --------- RF   LF --------- RF    LF --------- RF   LF --------- RF
    */
-  #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB }
+  #define BED_TRAMMING_LEVELING_ORDER { LB, RB }
 #endif
 
 // @section homing
 
 // The center of the bed is at (X=0, Y=0)
-#define BED_CENTER_AT_0_0
+//#define BED_CENTER_AT_0_0
 
 // Manually set the home position. Leave these undefined for automatic settings.
 // For DELTA this is the top-center of the Cartesian print volume.
@@ -2303,7 +2303,7 @@
 #endif
 
 // Homing speeds (linear=mm/min, rotational=°/min)
-#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
+#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (5*60) }
 
 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS
@@ -2760,7 +2760,7 @@
 // If you have a speaker that can produce tones, enable it here.
 // By default Marlin assumes you have a buzzer with a fixed frequency.
 //
-//#define SPEAKER
+#define SPEAKER
 
 //
 // The duration and frequency for the UI feedback sound.