Update SERIAL_DMA and FREEZE_FEATURE comments (#1043)

* ✨🐛 HC32 - Add SERIAL_DMA, fix SDIO and MEATPACK Co-authored-by: Chris <[email protected]> * 📝Improve Freeze Feature comment Co-authored-by: InsanityAutomation <[email protected]>
MarlinFirmware · Apr 20, 2024 · 344b5a8 · 344b5a8
1 parent 1531cff
commit 344b5a8
Show file tree

Hide file tree

Showing 366 changed files with 1,098 additions and 732 deletions.
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4302,7 +4302,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -2725,7 +2725,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4316,7 +4316,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -2716,7 +2716,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4307,7 +4307,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4308,7 +4308,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE

diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h
@@ -2715,7 +2715,7 @@
  * This feature is EXPERIMENTAL so use with caution and test thoroughly.
  * Enable this option to receive data on the serial ports via the onboard DMA
  * controller for more stable and reliable high-speed serial communication.
- * Only some STM32 MCUs are currently supported.
+ * Support is currently limited to some STM32 MCUs and all HC32 MCUs.
  * Note: This has no effect on emulated USB serial ports.
  */
 //#define SERIAL_DMA
@@ -4306,7 +4306,8 @@
 
 /**
  * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
  * @section interface
  */
 //#define FREEZE_FEATURE