Merge branch 'import-2.1.x' into pr/1088

MarlinFirmware · Aug 24, 2024 · 189670a · 189670a
2 parents 00ce7a3 + d2dc04c
commit 189670a
Show file tree

Hide file tree

Showing 748 changed files with 4,963 additions and 2,719 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -387,14 +387,15 @@
  *   PRUSA_MMU1           : Průša MMU1 (The "multiplexer" version)
  *   PRUSA_MMU2           : Průša MMU2
  *   PRUSA_MMU2S          : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
+ *   PRUSA_MMU3           : Průša MMU3  (Requires MK3S extruder with motion sensor and MMU firmware version 3.x.x, EXTRUDERS = 5)
  *   EXTENDABLE_EMU_MMU2  : MMU with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *   EXTENDABLE_EMU_MMU2S : MMUS with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *
  * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  * See additional options in Configuration_adv.h.
- * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
+ * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "PRUSA_MMU3", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
  */
-//#define MMU_MODEL PRUSA_MMU2
+//#define MMU_MODEL PRUSA_MMU3
 
 // @section psu control
 
@@ -1477,7 +1478,8 @@
  * A lightweight, solenoid-driven probe.
  * For information about this sensor https://github.com/bigtreetech/MicroProbe
  *
- * Also requires: PROBE_ENABLE_DISABLE
+ * Also requires PROBE_ENABLE_DISABLE
+ * With FT_MOTION requires ENDSTOP_INTERRUPTS_FEATURE
  */
 //#define BIQU_MICROPROBE_V1  // Triggers HIGH
 //#define BIQU_MICROPROBE_V2  // Triggers LOW
@@ -1647,6 +1649,7 @@
   #define PROBE_TARE_DELAY 200    // (ms) Delay after tare before
   #define PROBE_TARE_STATE HIGH   // State to write pin for tare
   //#define PROBE_TARE_PIN PA5    // Override default pin
+  //#define PROBE_TARE_MENU       // Display a menu item to tare the probe
   #if ENABLED(PROBE_ACTIVATION_SWITCH)
     //#define PROBE_TARE_ONLY_WHILE_INACTIVE  // Fail to tare/probe if PROBE_ACTIVATION_SWITCH is active
   #endif

diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -1127,8 +1127,8 @@
   #define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
   #define FTM_DEFAULT_SHAPER_X      ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
   #define FTM_DEFAULT_SHAPER_Y      ftMotionShaper_NONE // Default shaper mode on Y axis
-  #define FTM_SHAPING_DEFAULT_X_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
-  #define FTM_SHAPING_DEFAULT_Y_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
+  #define FTM_SHAPING_DEFAULT_FREQ_X   37.0f      // (Hz) Default peak frequency used by input shapers
+  #define FTM_SHAPING_DEFAULT_FREQ_Y   37.0f      // (Hz) Default peak frequency used by input shapers
   #define FTM_LINEAR_ADV_DEFAULT_ENA   false      // Default linear advance enable (true) or disable (false)
   #define FTM_LINEAR_ADV_DEFAULT_K      0         // Default linear advance gain, integer value. (Acceleration-based scaling factor.)
   #define FTM_SHAPING_ZETA_X            0.1f      // Zeta used by input shapers for X axis
@@ -1558,6 +1558,9 @@
   // BACK menu items keep the highlight at the top
   //#define TURBO_BACK_MENU_ITEM
 
+  // BACK menu items show "Back" instead of the previous menu name
+  //#define GENERIC_BACK_MENU_ITEM
+
   // Insert a menu for preheating at the top level to allow for quick access
   //#define PREHEAT_SHORTCUT_MENU_ITEM
 

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -388,14 +388,15 @@
  *   PRUSA_MMU1           : Průša MMU1 (The "multiplexer" version)
  *   PRUSA_MMU2           : Průša MMU2
  *   PRUSA_MMU2S          : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
+ *   PRUSA_MMU3           : Průša MMU3  (Requires MK3S extruder with motion sensor and MMU firmware version 3.x.x, EXTRUDERS = 5)
  *   EXTENDABLE_EMU_MMU2  : MMU with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *   EXTENDABLE_EMU_MMU2S : MMUS with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *
  * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  * See additional options in Configuration_adv.h.
- * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
+ * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "PRUSA_MMU3", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
  */
-//#define MMU_MODEL PRUSA_MMU2
+//#define MMU_MODEL PRUSA_MMU3
 
 // @section psu control
 
@@ -1479,7 +1480,8 @@
  * A lightweight, solenoid-driven probe.
  * For information about this sensor https://github.com/bigtreetech/MicroProbe
  *
- * Also requires: PROBE_ENABLE_DISABLE
+ * Also requires PROBE_ENABLE_DISABLE
+ * With FT_MOTION requires ENDSTOP_INTERRUPTS_FEATURE
  */
 //#define BIQU_MICROPROBE_V1  // Triggers HIGH
 //#define BIQU_MICROPROBE_V2  // Triggers LOW
@@ -1649,6 +1651,7 @@
   #define PROBE_TARE_DELAY 200    // (ms) Delay after tare before
   #define PROBE_TARE_STATE HIGH   // State to write pin for tare
   //#define PROBE_TARE_PIN PA5    // Override default pin
+  //#define PROBE_TARE_MENU       // Display a menu item to tare the probe
   #if ENABLED(PROBE_ACTIVATION_SWITCH)
     //#define PROBE_TARE_ONLY_WHILE_INACTIVE  // Fail to tare/probe if PROBE_ACTIVATION_SWITCH is active
   #endif

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -305,8 +305,8 @@
  * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  */
 #if ALL(HAS_HOTEND, THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 40        // (seconds)
-  #define THERMAL_PROTECTION_HYSTERESIS 4     // (°C)
+  #define THERMAL_PROTECTION_PERIOD        40 // (seconds)
+  #define THERMAL_PROTECTION_HYSTERESIS     4 // (°C)
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow down the part-cooling fan if the temperature drops
   #if ENABLED(ADAPTIVE_FAN_SLOWING)
@@ -1127,8 +1127,8 @@
   #define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
   #define FTM_DEFAULT_SHAPER_X      ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
   #define FTM_DEFAULT_SHAPER_Y      ftMotionShaper_NONE // Default shaper mode on Y axis
-  #define FTM_SHAPING_DEFAULT_X_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
-  #define FTM_SHAPING_DEFAULT_Y_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
+  #define FTM_SHAPING_DEFAULT_FREQ_X   37.0f      // (Hz) Default peak frequency used by input shapers
+  #define FTM_SHAPING_DEFAULT_FREQ_Y   37.0f      // (Hz) Default peak frequency used by input shapers
   #define FTM_LINEAR_ADV_DEFAULT_ENA   false      // Default linear advance enable (true) or disable (false)
   #define FTM_LINEAR_ADV_DEFAULT_K      0         // Default linear advance gain, integer value. (Acceleration-based scaling factor.)
   #define FTM_SHAPING_ZETA_X            0.1f      // Zeta used by input shapers for X axis
@@ -1558,6 +1558,9 @@
   // BACK menu items keep the highlight at the top
   //#define TURBO_BACK_MENU_ITEM
 
+  // BACK menu items show "Back" instead of the previous menu name
+  //#define GENERIC_BACK_MENU_ITEM
+
   // Insert a menu for preheating at the top level to allow for quick access
   //#define PREHEAT_SHORTCUT_MENU_ITEM
 

diff --git a/config/examples/3DMatik/XL/Configuration.h b/config/examples/3DMatik/XL/Configuration.h
@@ -387,14 +387,15 @@
  *   PRUSA_MMU1           : Průša MMU1 (The "multiplexer" version)
  *   PRUSA_MMU2           : Průša MMU2
  *   PRUSA_MMU2S          : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
+ *   PRUSA_MMU3           : Průša MMU3  (Requires MK3S extruder with motion sensor and MMU firmware version 3.x.x, EXTRUDERS = 5)
  *   EXTENDABLE_EMU_MMU2  : MMU with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *   EXTENDABLE_EMU_MMU2S : MMUS with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *
  * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  * See additional options in Configuration_adv.h.
- * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
+ * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "PRUSA_MMU3", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
  */
-//#define MMU_MODEL PRUSA_MMU2
+//#define MMU_MODEL PRUSA_MMU3
 
 // @section psu control
 
@@ -1477,7 +1478,8 @@
  * A lightweight, solenoid-driven probe.
  * For information about this sensor https://github.com/bigtreetech/MicroProbe
  *
- * Also requires: PROBE_ENABLE_DISABLE
+ * Also requires PROBE_ENABLE_DISABLE
+ * With FT_MOTION requires ENDSTOP_INTERRUPTS_FEATURE
  */
 //#define BIQU_MICROPROBE_V1  // Triggers HIGH
 //#define BIQU_MICROPROBE_V2  // Triggers LOW
@@ -1647,6 +1649,7 @@
   #define PROBE_TARE_DELAY 200    // (ms) Delay after tare before
   #define PROBE_TARE_STATE HIGH   // State to write pin for tare
   //#define PROBE_TARE_PIN PA5    // Override default pin
+  //#define PROBE_TARE_MENU       // Display a menu item to tare the probe
   #if ENABLED(PROBE_ACTIVATION_SWITCH)
     //#define PROBE_TARE_ONLY_WHILE_INACTIVE  // Fail to tare/probe if PROBE_ACTIVATION_SWITCH is active
   #endif

diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h
@@ -305,8 +305,8 @@
  * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  */
 #if ALL(HAS_HOTEND, THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 40        // (seconds)
-  #define THERMAL_PROTECTION_HYSTERESIS 4     // (°C)
+  #define THERMAL_PROTECTION_PERIOD        40 // (seconds)
+  #define THERMAL_PROTECTION_HYSTERESIS     4 // (°C)
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow down the part-cooling fan if the temperature drops
   #if ENABLED(ADAPTIVE_FAN_SLOWING)
@@ -1127,8 +1127,8 @@
   #define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
   #define FTM_DEFAULT_SHAPER_X      ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
   #define FTM_DEFAULT_SHAPER_Y      ftMotionShaper_NONE // Default shaper mode on Y axis
-  #define FTM_SHAPING_DEFAULT_X_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
-  #define FTM_SHAPING_DEFAULT_Y_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
+  #define FTM_SHAPING_DEFAULT_FREQ_X   37.0f      // (Hz) Default peak frequency used by input shapers
+  #define FTM_SHAPING_DEFAULT_FREQ_Y   37.0f      // (Hz) Default peak frequency used by input shapers
   #define FTM_LINEAR_ADV_DEFAULT_ENA   false      // Default linear advance enable (true) or disable (false)
   #define FTM_LINEAR_ADV_DEFAULT_K      0         // Default linear advance gain, integer value. (Acceleration-based scaling factor.)
   #define FTM_SHAPING_ZETA_X            0.1f      // Zeta used by input shapers for X axis
@@ -1558,6 +1558,9 @@
   // BACK menu items keep the highlight at the top
   //#define TURBO_BACK_MENU_ITEM
 
+  // BACK menu items show "Back" instead of the previous menu name
+  //#define GENERIC_BACK_MENU_ITEM
+
   // Insert a menu for preheating at the top level to allow for quick access
   //#define PREHEAT_SHORTCUT_MENU_ITEM
 

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -387,14 +387,15 @@
  *   PRUSA_MMU1           : Průša MMU1 (The "multiplexer" version)
  *   PRUSA_MMU2           : Průša MMU2
  *   PRUSA_MMU2S          : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
+ *   PRUSA_MMU3           : Průša MMU3  (Requires MK3S extruder with motion sensor and MMU firmware version 3.x.x, EXTRUDERS = 5)
  *   EXTENDABLE_EMU_MMU2  : MMU with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *   EXTENDABLE_EMU_MMU2S : MMUS with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *
  * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  * See additional options in Configuration_adv.h.
- * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
+ * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "PRUSA_MMU3", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
  */
-//#define MMU_MODEL PRUSA_MMU2
+//#define MMU_MODEL PRUSA_MMU3
 
 // @section psu control
 
@@ -1477,7 +1478,8 @@
  * A lightweight, solenoid-driven probe.
  * For information about this sensor https://github.com/bigtreetech/MicroProbe
  *
- * Also requires: PROBE_ENABLE_DISABLE
+ * Also requires PROBE_ENABLE_DISABLE
+ * With FT_MOTION requires ENDSTOP_INTERRUPTS_FEATURE
  */
 //#define BIQU_MICROPROBE_V1  // Triggers HIGH
 //#define BIQU_MICROPROBE_V2  // Triggers LOW
@@ -1647,6 +1649,7 @@
   #define PROBE_TARE_DELAY 200    // (ms) Delay after tare before
   #define PROBE_TARE_STATE HIGH   // State to write pin for tare
   //#define PROBE_TARE_PIN PA5    // Override default pin
+  //#define PROBE_TARE_MENU       // Display a menu item to tare the probe
   #if ENABLED(PROBE_ACTIVATION_SWITCH)
     //#define PROBE_TARE_ONLY_WHILE_INACTIVE  // Fail to tare/probe if PROBE_ACTIVATION_SWITCH is active
   #endif

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -305,8 +305,8 @@
  * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  */
 #if ALL(HAS_HOTEND, THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 40        // (seconds)
-  #define THERMAL_PROTECTION_HYSTERESIS 4     // (°C)
+  #define THERMAL_PROTECTION_PERIOD        40 // (seconds)
+  #define THERMAL_PROTECTION_HYSTERESIS     4 // (°C)
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow down the part-cooling fan if the temperature drops
   #if ENABLED(ADAPTIVE_FAN_SLOWING)
@@ -1127,8 +1127,8 @@
   #define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
   #define FTM_DEFAULT_SHAPER_X      ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
   #define FTM_DEFAULT_SHAPER_Y      ftMotionShaper_NONE // Default shaper mode on Y axis
-  #define FTM_SHAPING_DEFAULT_X_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
-  #define FTM_SHAPING_DEFAULT_Y_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
+  #define FTM_SHAPING_DEFAULT_FREQ_X   37.0f      // (Hz) Default peak frequency used by input shapers
+  #define FTM_SHAPING_DEFAULT_FREQ_Y   37.0f      // (Hz) Default peak frequency used by input shapers
   #define FTM_LINEAR_ADV_DEFAULT_ENA   false      // Default linear advance enable (true) or disable (false)
   #define FTM_LINEAR_ADV_DEFAULT_K      0         // Default linear advance gain, integer value. (Acceleration-based scaling factor.)
   #define FTM_SHAPING_ZETA_X            0.1f      // Zeta used by input shapers for X axis
@@ -1558,6 +1558,9 @@
   // BACK menu items keep the highlight at the top
   //#define TURBO_BACK_MENU_ITEM
 
+  // BACK menu items show "Back" instead of the previous menu name
+  //#define GENERIC_BACK_MENU_ITEM
+
   // Insert a menu for preheating at the top level to allow for quick access
   //#define PREHEAT_SHORTCUT_MENU_ITEM
 

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -387,14 +387,15 @@
  *   PRUSA_MMU1           : Průša MMU1 (The "multiplexer" version)
  *   PRUSA_MMU2           : Průša MMU2
  *   PRUSA_MMU2S          : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
+ *   PRUSA_MMU3           : Průša MMU3  (Requires MK3S extruder with motion sensor and MMU firmware version 3.x.x, EXTRUDERS = 5)
  *   EXTENDABLE_EMU_MMU2  : MMU with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *   EXTENDABLE_EMU_MMU2S : MMUS with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
  *
  * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  * See additional options in Configuration_adv.h.
- * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
+ * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "PRUSA_MMU3", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
  */
-//#define MMU_MODEL PRUSA_MMU2
+//#define MMU_MODEL PRUSA_MMU3
 
 // @section psu control
 
@@ -1477,7 +1478,8 @@
  * A lightweight, solenoid-driven probe.
  * For information about this sensor https://github.com/bigtreetech/MicroProbe
  *
- * Also requires: PROBE_ENABLE_DISABLE
+ * Also requires PROBE_ENABLE_DISABLE
+ * With FT_MOTION requires ENDSTOP_INTERRUPTS_FEATURE
  */
 //#define BIQU_MICROPROBE_V1  // Triggers HIGH
 //#define BIQU_MICROPROBE_V2  // Triggers LOW
@@ -1647,6 +1649,7 @@
   #define PROBE_TARE_DELAY 200    // (ms) Delay after tare before
   #define PROBE_TARE_STATE HIGH   // State to write pin for tare
   //#define PROBE_TARE_PIN PA5    // Override default pin
+  //#define PROBE_TARE_MENU       // Display a menu item to tare the probe
   #if ENABLED(PROBE_ACTIVATION_SWITCH)
     //#define PROBE_TARE_ONLY_WHILE_INACTIVE  // Fail to tare/probe if PROBE_ACTIVATION_SWITCH is active
   #endif

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
@@ -305,8 +305,8 @@
  * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  */
 #if ALL(HAS_HOTEND, THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 40        // (seconds)
-  #define THERMAL_PROTECTION_HYSTERESIS 4     // (°C)
+  #define THERMAL_PROTECTION_PERIOD        40 // (seconds)
+  #define THERMAL_PROTECTION_HYSTERESIS     4 // (°C)
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow down the part-cooling fan if the temperature drops
   #if ENABLED(ADAPTIVE_FAN_SLOWING)
@@ -1127,8 +1127,8 @@
   #define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
   #define FTM_DEFAULT_SHAPER_X      ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
   #define FTM_DEFAULT_SHAPER_Y      ftMotionShaper_NONE // Default shaper mode on Y axis
-  #define FTM_SHAPING_DEFAULT_X_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
-  #define FTM_SHAPING_DEFAULT_Y_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
+  #define FTM_SHAPING_DEFAULT_FREQ_X   37.0f      // (Hz) Default peak frequency used by input shapers
+  #define FTM_SHAPING_DEFAULT_FREQ_Y   37.0f      // (Hz) Default peak frequency used by input shapers
   #define FTM_LINEAR_ADV_DEFAULT_ENA   false      // Default linear advance enable (true) or disable (false)
   #define FTM_LINEAR_ADV_DEFAULT_K      0         // Default linear advance gain, integer value. (Acceleration-based scaling factor.)
   #define FTM_SHAPING_ZETA_X            0.1f      // Zeta used by input shapers for X axis
@@ -1558,6 +1558,9 @@
   // BACK menu items keep the highlight at the top
   //#define TURBO_BACK_MENU_ITEM
 
+  // BACK menu items show "Back" instead of the previous menu name
+  //#define GENERIC_BACK_MENU_ITEM
+
   // Insert a menu for preheating at the top level to allow for quick access
   //#define PREHEAT_SHORTCUT_MENU_ITEM