update readme

MarlinFirmware · Aug 8, 2023 · 161a5a8 · 161a5a8
1 parent 16488fc
commit 161a5a8
Showing 1 changed file with 2 additions and 2 deletions.
diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/README.md b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/README.md
@@ -1,8 +1,8 @@
 ## CR-10 Mini with BLTouch
 
-Configuration for the BigTreeTech SKR E3 Mini V2 in a Creality CR-10 Mini using the stock CR-10 display, and a BL Touch v3.1 ABL probe mounted on a Bullseye fan duct. Additional features are enabled to take advantage of the capabilities of the BTT SKR E3 Mini V2 board, detailed below.
+Configuration for the BigTreeTech SKR E3 Mini V2 in a Creality CR-10 Mini using the stock CR-10 display, and a BL Touch v3.1 ABL probe mounted on a Bullseye fan duct. Additional features are enabled to take advantage of the capabilities of the BTT SKR E3 Mini V3 board, detailed below.
 
-Compile this in the `STM32F103RC_btt_512K` environment. The test board had 512K of Flash and this configuration uses a little over half of that. If your board has only 256K, you will have to disable some features to make the firmware fit.
+Compile this in the `STM32G0B1RE_btt` environment.
 
 ### Configuration.h notes: