Download the latest release, see Installation for how to install the tool or download Introduction to BETTER Presentation to start.
The lack of public-access, data-driven tools requiring minimal inputs and short run time to benchmark against peers, quantify energy/cost savings, and recommend energy efficiency (EE) improvements is one of the main barriers to capturing untapped EE opportunities in the United States and globally. To fill the gap, and simultaneously address the need for automated, cost-effective, and standardized EE assessment of large volumes of buildings in U.S. state and municipal benchmarking and transparency programs, an automated, open-source, virtual building EE retrofit targeting tool has been developed with support from the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Building Technologies Office (BTO) by Lawrence Berkeley National Laboratory (LBNL) and Johnson Controls, with assistance from ICF.
BETTER requires very simple building data inputs; minimum manual work; and provides fast, “no-cost/no-touch” building EE upgrade targeting (equipment and operations) with an acceptable accuracy. It implements the ASHRAE Inverse Modeling Toolkit (IMT) to find piece-wise linear regression models between building energy consumption (electricity and fossil fuel) and outdoor air temperature. The model coefficients of each individual building are then benchmarked against the coefficients of buildings in the same space type category. Johnson Controls’ LEAN Energy Analysis is used to identify the EE measures for the building. Finally, the potential energy, cost, and greenhouse gas (GHG) emissions reductions are estimated with the EE measures.
BETTER is made possible by support from the U.S. DOE EERE BTO.
BETTER is being developed under Cooperative Research and Development Agreement (CRADA) No. FP00007338 between the Regents of the University of California Ernest Orlando Lawrence Berkeley National Laboratory, under its U.S. DOE Contract No. DE-AC02-05CH11231, and Johnson Controls, with assistance from ICF.
BETTER is developed using Python 3.6. We recommend using Anaconda to manage Python environments. If you'd rather not install Anaconda, you can download Python 3.6 here.
The BETTER source code posted here can provide analysis on a building-by-building and portfolio basis as long as the following data points for at least 30 buildings of an identical type are provided:
- Building Location (City, State)
- Gross Floor Area in m2 (exclude parking)
- Building Primary/Secondary Space Use Type
- Monthly Utility Bill Consumption and Cost Data (by fuel type)
- Electricity and fossil fuel (if any) consumption and cost
- Minimum of 1 year is required (2-5 years of data is desirable)
- For each consumption point, start and end dates (“bill dates”) are required
- Consumption units are required (e.g., kWh, therms, etc.)
- Cost units are required (e.g., US Dollars)
- Electricity and fossil fuel (if any) consumption and cost
Please note that the BETTER source code was initially developed for a global market and therefore the current version uses metric/SI units (such as square meters instead of square feet for building area) for some inputs and outputs.
Sample data for 10 buildings are included in ./data/portfolio.xlsx. Metadata for each building to be analyzed should be entered in the “Metadata” tab, one row per building. Utility data for all fuel types should be entered on the “Utility” tab. Be sure to double check that the building ID, fuel type, and units are accurate for each utility bill entry, and be sure to save the file as portfolio.xlsx. Overwrite the file to suit your needs.
A sample benchmark statistic is provided in ./better/constants.py. The team is working to create a database of U.S. buildings to allow the benchmarking and analysis of individual buildings. If you have a portfolio of at least 30 buildings, you may choose to benchmark individual buildings against your own data set. For smaller portfolios, your benchmark will be based on buildings in the demo. See “How to Use” for information on how to select your benchmark data set.
Weather data is downloaded from the NOAA website for the building location. To use previously downloaded weather data at later runs set cached_weather to True in run.py.
- Download and install Python >=3.6
- Download the source code from the latest release
- Extract and navigate to the downloaded release
- Install dependencies by clicking on
install.bator runpython setup.py installon your cmd
Note: The current release is an alpha version. The tool will be packaged and setup files will be provided in future releases.
The focus of the development is the building energy benchmarking and EE targeting analytical core but not the user interface. To demonstrate the data input/output and the use of the tool.
- From your cmd or terminal, change your working directory to
./better - Run
python demo.py. It will run the sample of 10 buildings provided in./data/portfolio.xslx - Output is stored in
./outputs
Once you have run the demo and familiarized yourself with the tool, you can use your own building data and follow the steps below to run analyses on either a single building or on a portfolio of buildings.
- Change building information and utility data in the
./data/portfolio.xlsxand save the file. - Open
./better/run.pyfile using a text editor and ensure that line 11 (run_single(...)) is uncommented, and line 13 (run_batch(...)) is commented out (i.e., has a “#” at the beginning of the line). - Set the target building ID based on the ID in
portfolio.xlsx(e.g.,bldg_id = 1– change the 1 to match the ID of the building you wish to analyze). - Set the saving target level (1 = conservative, 2 = nominal, 3 = aggressive)
- Run the analysis by running python run.py from your cmd or terminal
- Change building information and utility data in the
./data/portfolio.xlsxand save the file. - Open ./better/run.py file using a text editor and ensure that line 11 (“run_single”) is commented out (i.e., has a “#” at the beginning of the line), and line 13 (“run_batch”) is uncommented.
- Set the start and end building IDs based on the IDs in portfolio.xlsx (e.g.,
start_id=1andend_id=20– change the 1 and 20 to match the first and last IDs of the buildings you wish to analyze). - Set the saving target level (1 = conservative, 2 = nominal, 3 = aggressive)
- Run the analysis by running the
python run.pyfrom your cmd or terminal
The analysis results are in the ./outputs folder. Comprehensive reports are provided in .html format for each individual building, and results are explained within those html files. For portfolio analyses, a separate Portfolio html output is also provided.
Building Efficiency Targeting Tool for Energy Retrofits (BETTER) Copyright (c) 2018, The Regents of the University of California, through Lawrence Berkeley National Laboratory (subject to receipt of any required approvals from the U.S. Dept. of Energy). All rights reserved.
If you have questions about your rights to use or distribute this software, please contact Berkeley Lab's Intellectual Property Office at [email protected].
NOTICE. This Software was developed under funding from the U.S. Department of Energy and the U.S. Government consequently retains certain rights. As such, the U.S. Government has been granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable, worldwide license in the Software to reproduce, distribute copies to the public, prepare derivative works, and perform publicly and display publicly, and to permit other to do so.
