API Quickstart

Introduction

This document details how to setup a local reference architecture, and design and deploy an API. This will show the following API management features in a kube native environment using Kuadrant and other open source tools:

API design
API security and access control
API monitoring
Traffic management and scalability

The sections in this document are grouped by the persona that is typically associated with the steps in that section. The 3 personas are:

The platform engineer, who provides and maintains a platform for application developers,
the application developer, who designs, builds and maintains applications and APIs,
and the api consumer, who makes API calls to the API

Pre-requisities

docker: https://www.docker.com/products/docker-desktop/
kind: https://kind.sigs.k8s.io/
kubectl: https://kubernetes.io/docs/reference/kubectl/
kustomize: https://kustomize.io/
helm: https://helm.sh/docs/intro/install/
operator-sdk: https://sdk.operatorframework.io/docs/installation/
An AWS account with a Secret Access Key and Access Key ID. You will also need to a Route 53 zone.

(Platform engineer) Platform Setup

Export the following env vars:

export KUADRANT_AWS_ACCESS_KEY_ID=<key_id>
export KUADRANT_AWS_SECRET_ACCESS_KEY=<secret>
export KUADRANT_AWS_REGION=<region>
export KUADRANT_AWS_DNS_PUBLIC_ZONE_ID=<zone>
export KUADRANT_ZONE_ROOT_DOMAIN=<domain>

Clone the api-quickstart repo and run the quickstart script:

git clone [email protected]:Kuadrant/api-quickstart.git && cd api-quickstart
./quickstart.sh

This will take several minutes as 3 local kind clusters are started and configured in a hub and spoke architecture. The following components will be installed on the clusters:

Hub
- Open Cluster Management, as a 'hub' cluster
- Kuadrant Multi Cluster Gateway Controller, for managing a Gateway in multiple clusters centrally
- Gatekeeper, for constraints on Gateway Policy requirements
- Thanos, for receiving metrics centrally
- Grafana, for visualising API & Gateway metrics
Spoke x2
- Open Cluster Management, as a 'spoke' cluster
- Kuadrant Operator, for auth and rate limiting policies attached to a HTTPRoute
- Istio, with the Gateway API CRDs as the Gateway for ingress trafic
- MetalLB, for exposing the Gateway service on the local network
- Prometheus, for scraping and federating metrics to the hub

Verify the Gateway and configuration

View the ManagedZone, Gateway and TLSPolicy. The ManagedZone and TLSPolicy should have a Ready status of true. The Gateway should have a Programmed status of True.

kubectl --context kind-api-control-plane get managedzone,tlspolicy,gateway -n multi-cluster-gateways

Guard Rails: Constraint warnings about missing policies ( DNS, TLS)

Running the quick start script above will bring up Gatekeeper and the following constraints:

Gateways must have a TLSPolicy targeting them
Gateways must have a DNSPolicy targeting them

To view the above constraints in kubernetes, run this command:

kubectl --context kind-api-control-plane get constraints

!!! info

Since a gateway has been created automatically, along with a `TLSPolicy`, the violation for a missing `DNSPolicy` will be active until one is created.

Grafana dashboard view

To get a top level view of the constraints in violation, the Stitch: Platform Engineer Dashboard can be used. This can be accessed by at https://grafana.172.31.0.2.nip.io

Grafana has a default username and password of admin. You can find the Stitch: Platform Engineer Dashboard dashboard in the Default folder.

Create the missing DNSPolicy

Create a DNSPolicy that targets the Gateway with the following command:

kubectl --context kind-api-control-plane apply -f - <<EOF
apiVersion: kuadrant.io/v1alpha1
kind: DNSPolicy
metadata:
  name: prod-web
  namespace: multi-cluster-gateways
spec:
  targetRef:
    name: prod-web
    group: gateway.networking.k8s.io
    kind: Gateway
  loadBalancing:
    geo:
      defaultGeo: EU
EOF

Platform Overview

Since we have created all the policies that Gatekeeper had the guardrails around, you should no longer see any constraints in violation. This can be seen back in the Stitch: Platform Engineer Dashboard in Grafana at https://grafana.172.31.0.2.nip.io

(Application developer) App setup

API Design

Fork and/or clone the Petstore App at https://github.com/Kuadrant/api-petstore

git clone [email protected]:kuadrant/api-petstore && cd api-petstore
# Or if you forked the repository:
# git clone [email protected]:<your_github_username>/api-petstore && cd api-petstore

Then deploy it to the first workload cluster:

kustomize build ./resources/ | envsubst | kubectl --context kind-api-workload-1 apply -f-

This will deploy:

A petstore Namespace
A Secret, containing a static API key that we'll use later for auth
A Service and Deployment for our petstore app
A Gateway API HTTPRoute for our petstore app

Route 53 DNS Zone

When the DNS Policy has been created, and the previously created HTTPRoute has been attached, a DNS record custom resource will also be created in the cluster resulting in records being created in your AWS Route53. Navigate to Route53 and you should see some new records in the zone.

Configuring the region label

Configure the app REGION to be eu:

kubectl --context kind-api-workload-1 apply -k ./resources/eu-cluster/

Exploring the Open API Specification

The raw Open API spec can be found in the root of the repo:

cat openapi.yaml
# ---
# openapi: 3.0.2
# info:
#   title: Stitch API Petstore
#   version: 1.0.18

(Application developer) API security

We've included a number of sample x-kuadrant extensions in the OAS spec already:

At the top-level of our spec, we've defined an x-kuadrant extension to detail the Gateway API Gateway associated with our app:

  x-kuadrant:
    route:
      name: petstore
      namespace: petstore
      labels:
        deployment: petstore
        owner: cferreir
      hostnames:
      - petstore.$KUADRANT_ZONE_ROOT_DOMAIN
      parentRefs:
      - name: prod-web
        namespace: kuadrant-multi-cluster-gateways
        kind: Gateway

In /user/login, we have a Gateway API backendRef set and a rate_limit set. The rate limit policy for this endpoint restricts usage of this endpoint to 2 requests in a 10 second window:

x-kuadrant:
  backendRefs:
  - name: petstore
    namespace: petstore
    port: 8080
  rate_limit:
  rates:
  - limit: 2
    duration: 10
    unit: second

In /store/inventory, we have also have a Gateway API backendRefset and a rate_limit set. The rate limit policy for the endpoint restricts usage of this endpoint to 10 requests in a 10 second window:

x-kuadrant:
  backendRefs:
  - name: petstore
    namespace: petstore
    port: 8080
  rate_limit:
    rates:
    - limit: 10
      duration: 10
      unit: second

Finally, we have a securityScheme setup for apiKey auth, powered by Authorino. We'll show this in more detail a little later:
```
securitySchemes:
  api_key:
    type: apiKey
    name: api_key
    in: header
```

These extensions allow us to automatically generate Kuadrant Kubernetes resources, including AuthPolicies, RateLimitPolicies and Gateway API resources such as HTTPRoutes.

kuadrantctl

kuadrantctl is a cli that supports the generation of various Kubernetes resources via OAS specs. Let's run some commands to generate some of these resources. If you forked the api-pestore repo, you can check them in also. Let's apply these to our running workload to implement rate limiting and auth.

Installing `kuadrantctl`

Download kuadrantctl from the v0.2.0 release artifacts:

https://github.com/Kuadrant/kuadrantctl/releases/tag/v0.2.0

Drop the kuadrantctl binary somewhere into your $PATH (e.g. /usr/local/bin/).

For this next part of the tutorial, we recommend installing yq to pretty-print YAML resources.

Generating Kuadrant resources with `kuadrantctl`

We'll generate an AuthPolicy to implement API key auth, per the securityScheme in our OAS spec:

# Generate this resource and save:
kuadrantctl generate kuadrant authpolicy --oas openapi.yaml | yq -P | tee resources/authpolicy.yaml

# Apply this resource to our cluster:
kubectl --context kind-api-workload-1 apply -f ./resources/authpolicy.yaml

Next we'll generate a RateLimitPolicy, to protect our APIs with the limits we have setup in our OAS spec:

# Generate this resource and save:
kuadrantctl generate kuadrant ratelimitpolicy --oas openapi.yaml | yq -P | tee resources/ratelimitpolicy.yaml

# Apply this resource to our cluster:
kubectl --context kind-api-workload-1 apply -f ./resources/ratelimitpolicy.yaml

Lastly, we'll generate a Gateway API HTTPRoute to service our APIs:

# Generate this resource and save:
kuadrantctl generate gatewayapi httproute --oas openapi.yaml | yq -P | tee resources/httproute.yaml

# Apply this resource to our cluster, setting the hostname in via the KUADRANT_ZONE_ROOT_DOMAIN env var:
kustomize build ./resources/ | envsubst | kubectl --context kind-api-workload-1 apply -f-

Check our applied policies

Navigate to your app's Swagger UI:

echo https://petstore.$KUADRANT_ZONE_ROOT_DOMAIN/docs/

RateLimitPolicy

Let's check that our RateLimitPolicy for the /store/inventory has been applied and works correctly. Recall, our OAS spec had the following limits applied:

x-kuadrant:
  ...
  rate_limit:
    rates:
    - limit: 10
      duration: 10
      unit: second

Navigate to the /store/inventory API, click Try it out, and Execute.

You'll see a response similar to:

{
  "available": 10,
  "pending": 5,
  "sold": 3
}

This API has a rate limit applied, so if you send more than 10 requests in a 10 second window, you will see a 429 HTTP Status code from responses, and a "Too Many Requests" message in the response body. Click Execute quickly in succession to see your RateLimitPolicy in action.

AuthPolicy

Let's check that our AuthPolicy for the /store/admin endpoint has been applied and works correctly. Recall, our OAS spec had the following securitySchemes applied:

  securitySchemes:
    api_key:
      type: apiKey
      name: api_key
      in: header

Navigate to the /store/admin API, click Try it out, and Execute. You'll get a 401 response.

You can set a value for the api_key header by clicking Authorize at the top of the page. Set a value of secret. This api key value is stored in the petstore-api-key Secret in the petstore namespace. Try the /store/admin endpoint again and you should get a 200 response with the following:

{"message":"You are an admin!"}

Policy Adjustments

Run the Swagger UI editor to explore the OAS spec and make some tweaks:

docker run -p 8080:8080 -v $(pwd):/tmp -e SWAGGER_FILE=/tmp/openapi.yaml swaggerapi/swagger-editor

You should be able to access the Swagger Editor at http://localhost:8080. Our /store/inventory API needs some additonal rate limiting. This is one of our slowest, most expensive services, so we'd like to rate limit it further.

In your openapi.yaml, navigate to the /store/inventory endpoint in the paths block. Modify the rate_limit block to further restrict the amount of requests this endpoint can serve to 2 requests per 10 seconds:

x-kuadrant:
  ...
  rate_limit:
    rates:
    - limit: 2
      duration: 10
      unit: second

Save your updated spec - File > Save as YAML > and update your existing openapi.yaml. You may need to copy the file from your Downloads folder to the location of the petstore repository.

Next we'll re-generate our RateLimitPolicy with kuadrantctl:

# Generate this resource and save:
kuadrantctl generate kuadrant ratelimitpolicy --oas openapi.yaml | yq -P | tee resources/ratelimitpolicy.yaml

# Apply this resource to our cluster:
kubectl --context kind-api-workload-1 apply -f ./resources/ratelimitpolicy.yaml

At this stage you can optionally check in all the changes to the repo if you forked it.

# Optionally add, commit & push the changes to your fork
git add resources
git commit -am "Generated AuthPolicy,RateLimitPolicy & HTTPRoute"
git push # You may need to set an upstream as well

In your app's Swagger UI:

echo https://petstore.$KUADRANT_ZONE_ROOT_DOMAIN/docs/

Navigate to the /store/inventory API one more, click Try it out, and Execute.

You'll see the effects of our new RateLimitPolicy applied. If you now send more than 2 requests in a 10 second window, you'll be rate-limited.

Note: ❗ It may take a few minutes for the updated RateLimitPolicy to be configured with the modified rate limit.

(Application developer) Scaling the application

Deploy the petstore to the 2nd cluster:

kustomize build ./resources/ | envsubst | kubectl --context kind-api-workload-2 apply -f-
kubectl --context kind-api-workload-2 apply -f ./resources/authpolicy.yaml
kubectl --context kind-api-workload-2 apply -f ./resources/ratelimitpolicy.yaml

Configure the app REGION to be us:

kubectl --context kind-api-workload-2 apply -k ./resources/us-cluster/

(Platform engineer) Scaling the gateway and traffic management

Deploy the Gateway to the 2nd cluster:

kubectl --context kind-api-control-plane patch placement http-gateway --namespace multi-cluster-gateways --type='json' -p='[{"op": "replace", "path": "/spec/numberOfClusters", "value":2}]'

Label the 1st cluster as being in the 'EU' region, and the 2nd cluster as being in the 'US' region. These labels are used by the DNSPolicy for configuring geo DNS.

kubectl --context kind-api-control-plane label managedcluster kind-api-workload-1 kuadrant.io/lb-attribute-geo-code=EU --overwrite
kubectl --context kind-api-control-plane label managedcluster kind-api-workload-2 kuadrant.io/lb-attribute-geo-code=US --overwrite

(API consumer) Accessing the API from multiple regions

!!! info

This section is **optional**. If you'd rather skip this part, you can skip forward to the "(App developer) API traffic monitoring" section.

Pre-requisites

python3 and pip3: these are required for this part of the walkthrough

To demonstrate traffic management by geographical region, we'll use a tool called 'geosight'. This tool resolves hostnames from different regions, fetches a website from the resulting DNS record address and takes a screenshot. The petstore app has been configured to serve a flag image based on which region it is running in. In the 1st cluster, the EU flag is used. In the 2nd cluster, the US flag is used.

To install 'geosight', run the following commands:

git clone [email protected]:jasonmadigan/geosight.git && cd geosight
pip3 install -r requirements.txt
playwright install

Then run it using:

python3 app.py

Access the webapp at http://127.0.0.1:5001/. In the input box, type the address from below and click the Fetch button:

echo https://petstore.$KUADRANT_ZONE_ROOT_DOMAIN/server/details

After a moment you should see dns results for different regions, and a corresponding screenshot.

If you want to experiment with other regions, check out the Configuration section for geosight and the Kuadrant docs for geo loadbalancing.

(App developer) API traffic monitoring

To view the App developer dashboard, the same Grafana will be used from the platform engineer steps above: https://grafana.172.31.0.2.nip.io

The most relevant for a app developer is Stitch: App Developer Dashboard You should see panels about API's including:

Request and error rates
API summaries
API request summaries
API duration

All corresponding to our HTTPRoute coming from our OAS spec

(Platform Engineer) APIs summary view

Now that the app developer has deployed their app, new metrics and data is now available in the platform engineer dashboard seen in the previous step https://grafana.172.31.0.2.nip.io:

Gateways, routes and policies
Constraints & Violations (there should be no violations present)
APIs Summary

Summary

You now have a local environment with a reference architecture to design and deploy an API in a kube native way, using Kuadrant and other open source tools.

Cleanup

To destroy the previously created kind clusters, run:

./cleanup.sh

!!! info

DNS records in AWS will remain after cleanup - you can remove these from your zone manually.

Name		Name	Last commit message	Last commit date
Latest commit History 24 Commits
config		config
images		images
.cleanupUtils		.cleanupUtils
.deployUtils		.deployUtils
.gitignore		.gitignore
.kindUtils		.kindUtils
.quickstartEnv		.quickstartEnv
README.md		README.md
cleanup.sh		cleanup.sh
quickstart.sh		quickstart.sh

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

API Quickstart

Introduction

Pre-requisities

(Platform engineer) Platform Setup

Verify the Gateway and configuration

Guard Rails: Constraint warnings about missing policies ( DNS, TLS)

Grafana dashboard view

Create the missing DNSPolicy

Platform Overview

(Application developer) App setup

API Design

Route 53 DNS Zone

Configuring the region label

Exploring the Open API Specification

(Application developer) API security

kuadrantctl

Installing `kuadrantctl`

Generating Kuadrant resources with `kuadrantctl`

Check our applied policies

RateLimitPolicy

AuthPolicy

Policy Adjustments

(Application developer) Scaling the application

(Platform engineer) Scaling the gateway and traffic management

(API consumer) Accessing the API from multiple regions

Pre-requisites

(App developer) API traffic monitoring

(Platform Engineer) APIs summary view

Summary

Cleanup

About

Releases

Packages

Contributors 4

Languages

Kuadrant/api-quickstart

Folders and files

Latest commit

History

Repository files navigation

API Quickstart

Introduction

Pre-requisities

(Platform engineer) Platform Setup

Verify the Gateway and configuration

Guard Rails: Constraint warnings about missing policies ( DNS, TLS)

Grafana dashboard view

Create the missing DNSPolicy

Platform Overview

(Application developer) App setup

API Design

Route 53 DNS Zone

Configuring the region label

Exploring the Open API Specification

(Application developer) API security

kuadrantctl

Installing kuadrantctl

Generating Kuadrant resources with kuadrantctl

Check our applied policies

RateLimitPolicy

AuthPolicy

Policy Adjustments

(Application developer) Scaling the application

(Platform engineer) Scaling the gateway and traffic management

(API consumer) Accessing the API from multiple regions

Pre-requisites

(App developer) API traffic monitoring

(Platform Engineer) APIs summary view

Summary

Cleanup

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Contributors 4

Languages

Installing `kuadrantctl`

Generating Kuadrant resources with `kuadrantctl`

Packages