KCL: All keyword arguments should use camelCase

docs/kcl/appearance.md

@@ -9,15 +9,15 @@ Set the appearance of a solid. This only works on solids, not sketches or indivi
 This will work on any solid, including extruded solids, revolved solids, and shelled solids.
 
 ```js
-appearance(solid_set: SolidSet, color: String, metalness?: number, roughness?: number) -> SolidSet
+appearance(solidSet: SolidSet, color: String, metalness?: number, roughness?: number) -> SolidSet
 ```
 
 
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solid_set` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) whose appearance is being set | Yes |
+| `solidSet` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) whose appearance is being set | Yes |
 | `color` | `String` | Color of the new material, a hex string like '#ff0000' | Yes |
 | `metalness` | `number` | Metalness of the new material, a percentage like 95.7. | No |
 | `roughness` | `number` | Roughness of the new material, a percentage like 95.7. | No |

docs/kcl/circle.md

@@ -9,7 +9,7 @@ Construct a 2-dimensional circle, of the specified radius, centered at
 the provided (x, y) origin point.
 
 ```js
-circle(data: CircleData, sketch_surface_or_group: SketchOrSurface, tag?: TagDeclarator) -> Sketch
+circle(data: CircleData, sketchSurfaceOrGroup: SketchOrSurface, tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -18,7 +18,7 @@ circle(data: CircleData, sketch_surface_or_group: SketchOrSurface, tag?: TagDecl
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `data` | [`CircleData`](/docs/kcl/types/CircleData) | Data for drawing an circle | Yes |
-| `sketch_surface_or_group` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | A sketch surface or a sketch. | Yes |
+| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | A sketch surface or a sketch. | Yes |
 | `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) |  | No |
 
 ### Returns

docs/kcl/circleThreePoint.md

@@ -9,7 +9,7 @@ Construct a circle derived from 3 points.
 
 
 ```js
-circleThreePoint(p1: [number], p2: [number], p3: [number], sketch_surface_or_group: SketchOrSurface, tag?: TagDeclarator) -> Sketch
+circleThreePoint(p1: [number], p2: [number], p3: [number], sketchSurfaceOrGroup: SketchOrSurface, tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -20,7 +20,7 @@ circleThreePoint(p1: [number], p2: [number], p3: [number], sketch_surface_or_gro
 | `p1` | `[number]` | 1st point to derive the circle. | Yes |
 | `p2` | `[number]` | 2nd point to derive the circle. | Yes |
 | `p3` | `[number]` | 3rd point to derive the circle. | Yes |
-| `sketch_surface_or_group` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | Plane or surface to sketch on. | Yes |
+| `sketchSurfaceOrGroup` | [`SketchOrSurface`](/docs/kcl/types/SketchOrSurface) | Plane or surface to sketch on. | Yes |
 | `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Identifier for the circle to reference elsewhere. | No |
 
 ### Returns

docs/kcl/extrude.md

@@ -9,15 +9,15 @@ Extend a 2-dimensional sketch through a third dimension in order to
 create new 3-dimensional volume, or if extruded into an existing volume, cut into an existing solid.
 
 ```js
-extrude(sketch_set: SketchSet, length: number) -> SolidSet
+extrude(sketchSet: SketchSet, length: number) -> SolidSet
 ```
 
 
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketches should be extruded | Yes |
+| `sketchSet` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketches should be extruded | Yes |
 | `length` | `number` | How far to extrude the given sketches | Yes |
 
 ### Returns

docs/kcl/helix.md

@@ -9,7 +9,7 @@ Create a helix.
 
 
 ```js
-helix(revolutions: number, angle_start: number, ccw?: bool, radius: number, axis: Axis3dOrEdgeReference, length?: number) -> HelixValue
+helix(revolutions: number, angleStart: number, ccw?: bool, radius: number, axis: Axis3dOrEdgeReference, length?: number) -> HelixValue
 ```
 
 
@@ -18,7 +18,7 @@ helix(revolutions: number, angle_start: number, ccw?: bool, radius: number, axis
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `revolutions` | `number` | Number of revolutions. | Yes |
-| `angle_start` | `number` | Start angle (in degrees). | Yes |
+| `angleStart` | `number` | Start angle (in degrees). | Yes |
 | `ccw` | `bool` | Is the helix rotation counter clockwise? The default is `false`. | No |
 | `radius` | `number` | Radius of the helix. | Yes |
 | `axis` | [`Axis3dOrEdgeReference`](/docs/kcl/types/Axis3dOrEdgeReference) | Axis to use for the helix. | Yes |

docs/kcl/hole.md

@@ -9,15 +9,15 @@ Use a 2-dimensional sketch to cut a hole in another 2-dimensional sketch.
 
 
 ```js
-hole(hole_sketch: SketchSet, sketch: Sketch) -> Sketch
+hole(holeSketch: SketchSet, sketch: Sketch) -> Sketch
 ```
 
 
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `hole_sketch` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
+| `holeSketch` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
 | `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | A sketch is a collection of paths. | Yes |
 
 ### Returns

docs/kcl/import.md

@@ -15,15 +15,15 @@ For formats lacking unit data (such as STL, OBJ, or PLY files), the default unit
 Note: The import command currently only works when using the native Modeling App.
 
 ```js
-import(file_path: String, options?: ImportFormat) -> ImportedGeometry
+import(filePath: String, options?: ImportFormat) -> ImportedGeometry
 ```
 
 
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `file_path` | `String` |  | Yes |
+| `filePath` | `String` |  | Yes |
 | `options` | [`ImportFormat`](/docs/kcl/types/ImportFormat) | Import format specifier | No |
 
 ### Returns

docs/kcl/line.md

@@ -9,7 +9,7 @@ Extend the current sketch with a new straight line.
 
 
 ```js
-line(sketch: Sketch, end_absolute?: [number], end?: [number], tag?: TagDeclarator) -> Sketch
+line(sketch: Sketch, endAbsolute?: [number], end?: [number], tag?: TagDeclarator) -> Sketch
 ```
 
 
@@ -18,7 +18,7 @@ line(sketch: Sketch, end_absolute?: [number], end?: [number], tag?: TagDeclarato
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `sketch` | [`Sketch`](/docs/kcl/types/Sketch) | Which sketch should this path be added to? | Yes |
-| `end_absolute` | `[number]` | Which absolute point should this line go to? Incompatible with `end`. | No |
+| `endAbsolute` | `[number]` | Which absolute point should this line go to? Incompatible with `end`. | No |
 | `end` | `[number]` | How far away (along the X and Y axes) should this line go? Incompatible with `endAbsolute`. | No |
 | `tag` | [`TagDeclarator`](/docs/kcl/types#tag-declaration) | Create a new tag which refers to this line | No |
 

docs/kcl/loft.md

@@ -9,7 +9,7 @@ Create a 3D surface or solid by interpolating between two or more sketches.
 The sketches need to closed and on the same plane.
 
 ```js
-loft(sketches: [Sketch], v_degree: NonZeroU32, bez_approximate_rational: bool, base_curve_index?: integer, tolerance?: number) -> Solid
+loft(sketches: [Sketch], vDegree: NonZeroU32, bezApproximateRational: bool, baseCurveIndex?: integer, tolerance?: number) -> Solid
 ```
 
 
@@ -18,9 +18,9 @@ loft(sketches: [Sketch], v_degree: NonZeroU32, bez_approximate_rational: bool, b
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `sketches` | [`[Sketch]`](/docs/kcl/types/Sketch) | Which sketches to loft. Must include at least 2 sketches. | Yes |
-| `v_degree` | `NonZeroU32` | Degree of the interpolation. Must be greater than zero. For example, use 2 for quadratic, or 3 for cubic interpolation in the V direction. This defaults to 2, if not specified. | Yes |
-| `bez_approximate_rational` | `bool` | Attempt to approximate rational curves (such as arcs) using a bezier. This will remove banding around interpolations between arcs and non-arcs. It may produce errors in other scenarios Over time, this field won't be necessary. | Yes |
-| `base_curve_index` | `integer` | This can be set to override the automatically determined topological base curve, which is usually the first section encountered. | No |
+| `vDegree` | `NonZeroU32` | Degree of the interpolation. Must be greater than zero. For example, use 2 for quadratic, or 3 for cubic interpolation in the V direction. This defaults to 2, if not specified. | Yes |
+| `bezApproximateRational` | `bool` | Attempt to approximate rational curves (such as arcs) using a bezier. This will remove banding around interpolations between arcs and non-arcs. It may produce errors in other scenarios Over time, this field won't be necessary. | Yes |
+| `baseCurveIndex` | `integer` | This can be set to override the automatically determined topological base curve, which is usually the first section encountered. | No |
 | `tolerance` | `number` | Tolerance for the loft operation. | No |
 
 ### Returns

docs/kcl/map.md

@@ -9,7 +9,7 @@ Apply a function to every element of a list.
 Given a list like `[a, b, c]`, and a function like `f`, returns `[f(a), f(b), f(c)]`
 
 ```js
-map(array: [KclValue], map_fn: FunctionSource) -> [KclValue]
+map(array: [KclValue], mapFn: FunctionSource) -> [KclValue]
 ```
 
 
@@ -18,7 +18,7 @@ map(array: [KclValue], map_fn: FunctionSource) -> [KclValue]
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `array` | [`[KclValue]`](/docs/kcl/types/KclValue) |  | Yes |
-| `map_fn` | `FunctionSource` |  | Yes |
+| `mapFn` | `FunctionSource` |  | Yes |
 
 ### Returns
 

docs/kcl/mirror2d.md

@@ -11,7 +11,7 @@ Only works on unclosed sketches for now.
 Mirror occurs around a local sketch axis rather than a global axis.
 
 ```js
-mirror2d(data: Mirror2dData, sketch_set: SketchSet) -> [Sketch]
+mirror2d(data: Mirror2dData, sketchSet: SketchSet) -> [Sketch]
 ```
 
 
@@ -20,7 +20,7 @@ mirror2d(data: Mirror2dData, sketch_set: SketchSet) -> [Sketch]
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `data` | [`Mirror2dData`](/docs/kcl/types/Mirror2dData) | Data for a mirror. | Yes |
-| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
+| `sketchSet` | [`SketchSet`](/docs/kcl/types/SketchSet) | A sketch or a group of sketches. | Yes |
 
 ### Returns
 

docs/kcl/patternCircular2d.md

@@ -9,20 +9,20 @@ Repeat a 2-dimensional sketch some number of times along a partial or
 complete circle some specified number of times. Each object may additionally be rotated along the circle, ensuring orentation of the solid with respect to the center of the circle is maintained.
 
 ```js
-patternCircular2d(sketch_set: SketchSet, instances: integer, center: [number], arc_degrees: number, rotate_duplicates: bool, use_original?: bool) -> [Sketch]
+patternCircular2d(sketchSet: SketchSet, instances: integer, center: [number], arcDegrees: number, rotateDuplicates: bool, useOriginal?: bool) -> [Sketch]
 ```
 
 
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketch(es) to pattern | Yes |
+| `sketchSet` | [`SketchSet`](/docs/kcl/types/SketchSet) | Which sketch(es) to pattern | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `center` | `[number]` | The center about which to make the pattern. This is a 2D vector. | Yes |
-| `arc_degrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
-| `rotate_duplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `arcDegrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
+| `rotateDuplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
+| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 

docs/kcl/patternCircular3d.md

@@ -9,21 +9,21 @@ Repeat a 3-dimensional solid some number of times along a partial or
 complete circle some specified number of times. Each object may additionally be rotated along the circle, ensuring orentation of the solid with respect to the center of the circle is maintained.
 
 ```js
-patternCircular3d(solid_set: SolidSet, instances: integer, axis: [number], center: [number], arc_degrees: number, rotate_duplicates: bool, use_original?: bool) -> [Solid]
+patternCircular3d(solidSet: SolidSet, instances: integer, axis: [number], center: [number], arcDegrees: number, rotateDuplicates: bool, useOriginal?: bool) -> [Solid]
 ```
 
 
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solid_set` | [`SolidSet`](/docs/kcl/types/SolidSet) | Which solid(s) to pattern | Yes |
+| `solidSet` | [`SolidSet`](/docs/kcl/types/SolidSet) | Which solid(s) to pattern | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `axis` | `[number]` | The axis around which to make the pattern. This is a 3D vector | Yes |
 | `center` | `[number]` | The center about which to make the pattern. This is a 3D vector. | Yes |
-| `arc_degrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
-| `rotate_duplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `arcDegrees` | `number` | The arc angle (in degrees) to place the repetitions. Must be greater than 0. | Yes |
+| `rotateDuplicates` | `bool` | Whether or not to rotate the duplicates as they are copied. | Yes |
+| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 

docs/kcl/patternLinear2d.md

@@ -9,19 +9,19 @@ Repeat a 2-dimensional sketch along some dimension, with a dynamic amount
 of distance between each repetition, some specified number of times.
 
 ```js
-patternLinear2d(sketch_set: SketchSet, instances: integer, distance: number, axis: [number], use_original?: bool) -> [Sketch]
+patternLinear2d(sketchSet: SketchSet, instances: integer, distance: number, axis: [number], useOriginal?: bool) -> [Sketch]
 ```
 
 
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `sketch_set` | [`SketchSet`](/docs/kcl/types/SketchSet) | The sketch(es) to duplicate | Yes |
+| `sketchSet` | [`SketchSet`](/docs/kcl/types/SketchSet) | The sketch(es) to duplicate | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `distance` | `number` | Distance between each repetition. Also known as 'spacing'. | Yes |
 | `axis` | `[number]` | The axis of the pattern. A 2D vector. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 

docs/kcl/patternLinear3d.md

@@ -9,19 +9,19 @@ Repeat a 3-dimensional solid along a linear path, with a dynamic amount
 of distance between each repetition, some specified number of times.
 
 ```js
-patternLinear3d(solid_set: SolidSet, instances: integer, distance: number, axis: [number], use_original?: bool) -> [Solid]
+patternLinear3d(solidSet: SolidSet, instances: integer, distance: number, axis: [number], useOriginal?: bool) -> [Solid]
 ```
 
 
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solid_set` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) to duplicate | Yes |
+| `solidSet` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) to duplicate | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `distance` | `number` | Distance between each repetition. Also known as 'spacing'. | Yes |
 | `axis` | `[number]` | The axis of the pattern. A 2D vector. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns
 

docs/kcl/patternTransform.md

@@ -35,18 +35,18 @@ The transform function returns a transform object. All properties of the object
    - `rotation.origin` (either "local" i.e. rotate around its own center, "global" i.e. rotate around the scene's center, or a 3D point, defaults to "local")
 
 ```js
-patternTransform(solid_set: SolidSet, instances: integer, transform: FunctionSource, use_original?: bool) -> [Solid]
+patternTransform(solidSet: SolidSet, instances: integer, transform: FunctionSource, useOriginal?: bool) -> [Solid]
 ```
 
 
 ### Arguments
 
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
-| `solid_set` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) to duplicate | Yes |
+| `solidSet` | [`SolidSet`](/docs/kcl/types/SolidSet) | The solid(s) to duplicate | Yes |
 | `instances` | `integer` | The number of total instances. Must be greater than or equal to 1. This includes the original entity. For example, if instances is 2, there will be two copies -- the original, and one new copy. If instances is 1, this has no effect. | Yes |
 | `transform` | `FunctionSource` | How each replica should be transformed. The transform function takes a single parameter: an integer representing which number replication the transform is for. E.g. the first replica to be transformed will be passed the argument `1`. This simplifies your math: the transform function can rely on id `0` being the original instance passed into the `patternTransform`. See the examples. | Yes |
-| `use_original` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
+| `useOriginal` | `bool` | If the target was sketched on an extrusion, setting this will use the original sketch as the target, not the entire joined solid. Defaults to false. | No |
 
 ### Returns