v1.5.7

2024/12/23

• ❤️ 推荐关注微信公众号（Govin），订阅更新通知与使用技巧等文章推送，还可进行答疑和交流讨论
• ⚠️ 本次更新涉及配置变更，以最新 config/config.ini 为准，工作流用户需复制最新配置至user_config.ini
  ，Docker用户需清除主机挂载的旧配置
• ✨ 新增补偿机制模式（open_supply），用于控制是否开启补偿机制，当满足条件的结果数量不足时，将可能可用的接口补充到结果中
• ✨ 新增支持通过配置修改服务端口（app_port）
• ✨ 新增ghgo.xyz CDN代理加速
• ✨ config.ini配置文件新增注释说明（#704）
• ✨ 更新酒店源与组播源离线数据
• 🐛 修复IPv6接口测速异常低速率问题（#697、#713）
• 🐛 修复Sort接口可能出现的超时等待问题（#705、#719）
• 🐛 修复历史白名单结果导致移除白名单无效问题（#713）
• 🐛 修复订阅源白名单无效问题（#724）
• 🪄 优化更新时间url使用首个频道接口地址
• 🪄 优化接口来源偏好可设置为空，可实现全部来源按速率排序输出结果

English

• ❤️ Recommended to follow the WeChat public account (Govin) to subscribe to update notifications and articles on usage
  tips, as well as for Q&A and discussion.
• ⚠️ This update involves configuration changes. Refer to the latest config/config.ini. Workflow users need to copy
  the latest configuration to user_config.ini, and Docker users need to clear the old configuration mounted on the
  host.
• ✨ Added compensation mechanism mode (open_supply) to control whether to enable the compensation mechanism. When the
  number of results meeting the conditions is insufficient, potentially available interfaces will be supplemented into
  the results.
• ✨ Added support for modifying the server port through configuration (app_port).
• ✨ Added ghgo.xyz CDN proxy acceleration.
• ✨ Added comments to the config.ini configuration file (#704).
• ✨ Updated offline data for hotel sources and multicast sources.
• 🐛 Fixed the issue of abnormally low speed rates for IPv6 interface speed tests (#697, #713).
• 🐛 Fixed the issue of possible timeout waiting in the Sort interface (#705, #719).
• 🐛 Fixed the issue where historical whitelist results caused the removal of the whitelist to be ineffective (#713).
• 🐛 Fixed the issue where the subscription source whitelist was ineffective (#724).
• 🪄 Optimized the update time URL to use the first channel interface address.
• 🪄 Optimized the interface source preference to be set to empty, allowing all sources to be sorted by speed for output
  results.

v1.5.6

2024/12/17

• ❤️ 推荐关注微信公众号（Govin），订阅更新通知与使用技巧等文章推送，还可进行答疑和交流讨论
• ⚠️ 本次更新涉及配置变更，以最新 config/config.ini 为准，工作流用户需复制最新配置至user_config.ini
• ✨ 新增白名单列表功能，支持自定义接口和订阅源关键字白名单，文件位于config/whitelist.txt，工作流用户为了避免冲突覆盖，建议文件重命名添加
  user_前缀（#584,#599）
• ✨ 新增黑名单列表功能，支持接口关键字黑名单，文件位于config/blacklist.txt，工作流用户为了避免冲突覆盖，建议文件重命名添加
  user_前缀
• ✨ 新增订阅源列表功能，文件位于config/subscribe.txt，工作流用户为了避免冲突覆盖，建议文件重命名添加user_前缀
• ✨ 新增支持获取接口速率、最低速率过滤（open_filter_speed、min_speed）
• ✨ 新增支持修改Docker服务端口环境变量（APP_PORT）（#619）
• ✨ 新增jsdelivr代理地址，支持TLSv1.1 和 TLSv1.2 协议（#639）
• ✨ 新增离线数据和网络数据查询开关（open_use_cache, open_request）
• ✨ 新增控制是否使用离线数据和网络数据查询（open_use_cache、open_request）
• ✨ 新增支持跳过检查是否支持ipv6（ipv6_support）
• ✨ 调整GUI界面布局，新增测速设置页面，跳转编辑白/黑名单、订阅源列表文本
• 🐛 修复部分m3u8接口测速导致任务超时（#621）
• 🐛 修复GUI日志线程占用问题（#655）
• 🐛 补充显示更新时间配置文档（#622）
• 🪄 优化接口测速方法，移除yt-dlp（#621）
• 🗑️ 移除配置：open_ffmpeg、subscribe_urls、resolution_weight、response_time_weight、url_keywords_blacklist

English

• ❤️ Recommend following the WeChat public account (Govin) to subscribe to update notifications and articles on usage
  tips, as well as for Q&A and discussion.
• ⚠️ This update involves configuration changes. Refer to the latest config/config.ini. Workflow users need to copy
  the latest configuration to user_config.ini.
• ✨ Added whitelist feature, supporting custom interface and subscription source keyword whitelists. The file is located
  at config/whitelist.txt. To avoid conflict, workflow users are advised to rename the file with a user_ prefix (
  #584, #599).
• ✨ Added blacklist feature, supporting interface keyword blacklists. The file is located at config/blacklist.txt. To
  avoid conflict, workflow users are advised to rename the file with a user_ prefix.
• ✨ Added subscription source list feature. The file is located at config/subscribe.txt. To avoid conflict, workflow
  users are advised to rename the file with a user_ prefix.
• ✨ Added support for fetching interface speed and minimum speed filtering (open_filter_speed, min_speed).
• ✨ Added support for modifying Docker server port environment variable (APP_PORT) (#619).
• ✨ Added jsdelivr proxy address, supporting TLSv1.1 and TLSv1.2 protocols (#639).
• ✨ Added switches for offline data and network data queries (open_use_cache, open_request).
• ✨ Added control for whether to use offline data and network data queries (open_use_cache, open_request).
• ✨ Added support for skipping the check for IPv6 support (ipv6_support).
• ✨ Adjusted GUI layout, added speed test settings page, and links to edit whitelist/blacklist and subscription source
  list text files.
• 🐛 Fixed issue where some m3u8 interface speed tests caused task timeouts (#621).
• 🐛 Fixed GUI log thread occupation issue (#655).
• 🐛 Added display of update time in configuration documentation (#622).
• 🪄 Optimized interface speed test method, removed yt-dlp (#621).
• 🗑️ Removed configurations: open_ffmpeg, subscribe_urls, resolution_weight, response_time_weight,
  url_keywords_blacklist.

v1.5.5

2024/12/2

• ✨ 增加部分订阅源，移除失效源
• 🐛 调整github代理地址，解决访问失效（#603）
• 🐛 修复GUI测速阶段重复弹出窗口问题（#600）
• 🐛 修正宁夏/青海模板频道（#594）
• 🐛 修复IPv6结果为空问题
• 🪄 优化Docker测速CPU占用问题（#606）
• 🛠 调整部分默认配置

English

• ✨ Added some subscription sources, removed invalid sources
• 🐛 Adjusted GitHub proxy address to fix access failure (#603)
• 🐛 Fixed repeated pop-up window issue during GUI speed test phase (#600)
• 🐛 Corrected Ningxia/Qinghai template channels (#594)
• 🐛 Fixed issue with empty IPv6 results
• 🪄 Optimized Docker speed test CPU usage (#606)
• 🛠 Adjusted some default configurations

v1.5.4

2024/11/29

• ⚠️ Python 升级至 3.13，该版本已不支持 Win7，若有需要请使用 v1.5.3
• ⚠️ Github 仓库改名：iptv-api，使用旧接口地址请及时更换新地址
• ⚠️ Docker 新镜像仓库启用：guovern/iptv-api（旧版的 tv-driver 改为：guovern/iptv-api:latest，tv-requests 改为 guovern/iptv-api:lite），iptv-api:latest 为完整版、iptv-api:lite 为精简版，请使用新的名称命令进行拉取，旧仓库将不再维护
• ❤️ 新增微信公众号关注途径（公众号搜索：Govin），推荐关注公众号，可订阅更新通知与使用技巧等文章推送，还可进行交流讨论
• ✨ 更换测速方法（yt-dlp），重构测速逻辑，提升准确性、稳定性与效率，减小接口切换延迟（#563）
• ✨ 新增支持 ARM v7（#562）
• ✨ 新增双结果 API 访问（ip/m3u, ip/txt）（#581）
• ✨ 新增启动 API 服务命令（pipenv run service）
• 🪄 优化 Docker 镜像大小（完整版：-25%，精简版：-66%）
• 🐛 修复部分播放器不支持的信息间隔符（#581）

English

• ⚠️ Python has been upgraded to version 3.13, which no longer supports Win7. If needed, please use version v1.5.3.
• ⚠️ The GitHub repository has been renamed to iptv-api. If you are using the old API address, please update it to the new one promptly.
• ⚠️ New Docker image repository is now active: guovern/iptv-api (the old tv-driver is now guovern/iptv-api:latest, and tv-requests is now guovern/iptv-api:lite). iptv-api:latest is the full version, and iptv-api:lite is the lightweight version. Please use the new names to pull the images, as the old repository will no longer be maintained.
• ❤️ A new way to follow the WeChat official account (search for: Govin) has been added. It is recommended to follow the official account to subscribe to update notifications, usage tips, and engage in discussions.
• ✨ The speed measurement method has been changed to yt-dlp, and the speed measurement logic has been refactored to improve accuracy, stability, and efficiency, reducing interface switching delay (#563).
• ✨ Support for ARM v7 has been added (#562).
• ✨ Dual result API access (ip/m3u, ip/txt) has been added (#581).
• ✨ A command to start the API service (pipenv run service) has been added.
• 🪄 The size of the Docker image has been optimized (Full version: -25%, Lite version: -66%).
• 🐛 Fixed the information delimiter issue for some players that do not support it (#581).

v1.5.3

2024/11/19

⚠️ 这将是支持 Win7 的最后一个版本

• 🐛 修复 GUI “显示无结果分类”设置后保存失败（#564）
• 🐛 修复命令行启动报错 (#567）

English

⚠️ This will be the last version supporting Win7

• 🐛 Fixed the issue where the GUI setting for "Display No Results Category" failed to save (#564).
• 🐛 Fixed the error when starting from the command line (#567).

v1.5.2

2024/11/15

• ✨ 新增各省份地方台
• ✨ 新增控制显示无结果频道分类配置（open_empty_category）（#551）
• ✨ 调整接口源（#526）
• 🪄 优化频道数据插入速度
• 🪄 优化 IPv6 测速逻辑，解决无结果问题
• 🪄 优化页面服务启动与 docker 定时任务日志输出
• 🪄 调整默认配置：接口数量 urls_limit=10 等数量配置，增加订阅源
• 🐛 修复运行停止问题（#527）
• 🐛 修复 Win7 GUI 启动问题（#536）
• 🗑️ 移除部分无效订阅源
• 🗑️ 移除域名黑名单配置（domain_blacklist），请使用接口关键字黑名单（url_keywords_blacklist）替代

English

• ✨ Added local channels for each province.
• ✨ Added configuration to control the display of the No Results Channel Category (open_empty_category) (#551).
• ✨ Adjusted interface sources (#526).
• 🪄 Optimized the speed of channel data insertion.
• 🪄 Optimized IPv6 speed test logic to resolve no results issues.
• 🪄 Optimized page service startup and Docker scheduled task log output.
• 🪄 Adjusted default configurations: number of interfaces urls_limit=10, etc., and added subscription sources.
• 🐛 Fixed the issue of the program stopping (#527).
• 🐛 Fixed the issue of Win7 GUI startup (#536).
• 🗑️ Removed some invalid subscription sources.
• 🗑️ Removed the domain blacklist configuration (domain_blacklist). Please use the interface keyword blacklist (url_keywords_blacklist) instead.

v1.5.1

2024/11/5

• ✨ 新增频道接口白名单：不参与测速，永远保留在结果最前面（#470）
  使用方法：
  1. 模板频道接口地址后添加$!即可实现（如：广东珠江,http://xxx.m3u$! ）
  2. 额外信息补充（如：广东珠江,http://xxx.m3u$!额外信息 ），更多接口白名单请至#514 讨论
• ✨ 新增 🈳 无结果频道分类：无结果频道默认归类至该底部分类下（#473）
• ✨ 接口地址增加来源类型说明
• ✨ 默认模板增加广东民生（#481）、广州综合（#504）
• 🪄 优化偏好结果输出
• 🪄 重构配置读取与增加全局常量
• 🐛 修复部分接口匹配失败问题
• 🐛 修复更新结果为空等问题（#464，#467）
• 🐛 修复接口地址复制空格问题（#472 by:@haohaitao）
• 🐛 修复结果日志 unpack error
• 🐛 修复结果接口信息为空问题（#505）
• 🗑️ 移除仓库根目录 txt 结果文件，请至 output 目录下查看结果文件

English

• ✨ Added channel interface whitelist: Not participating in speed testing, always kept at the very front of the results. (#470)
  Usage:
  1. Add $! after the template channel interface address (e.g., Guangdong Pearl River, http://xxx.m3u$!).
  2. Additional information can be appended (e.g., Guangdong Pearl River, http://xxx.m3u$! Additional Information) (#470). For more interface whitelists, please discuss at #514.
• ✨ Added 🈳 No Results Channel Category: Channels without results are categorized under this bottom category by default (#473).
• ✨ Interface addresses now include source type descriptions.
• ✨ Default templates now include Guangdong People's Livelihood (#481) and Guangzhou Comprehensive (#504).
• 🪄 Optimized preferred result output.
• 🪄 Refactored configuration reading and added global constants.
• 🐛 Fixed issues with partial interface matching failures.
• 🐛 Fixed problems with empty update results, etc. (#464, #467).
• 🐛 Fixed the issue of spaces being copied with the interface address (#472 by:@haohaitao).
• 🐛 Fixed the unpack error in result logs.
• 🐛 Fixed the issue of empty interface information in results (#505).
• 🗑️ Removed txt result files from the repository root directory. Please check the result files in the output directory.

v1.5.0

2024/10/25

• ✨🛠 新增结果偏好设置：

  1. 接口来源优先级（origin_type_prefer）与数量设置（hotel_num, multicast_num, subscribe_num, online_search_num）
  2. IPv 类型优先级（ipv_type_prefer）与数量设置（ipv4_num, ipv6_num）

• ✨🛠 新增控制接口测速超时时间（sort_timeout）（#388）

• ✨🛠 新增控制是否开启页面服务（open_service）（青龙等平台可使用该配置实现任务执行完成后停止运行）

• ✨🛠 新增控制是否显示接口相关信息（open_url_info）（#431）

• ✨ 新增支持 m3u 地址订阅源（#389）

• ✨ 新增 🏛 经典剧场

• 🪄 优化 Docker ARM64 FFmpeg 支持（部分 ARM 设备无法运行 driver 镜像建议使用 requests 镜像）

• 🪄 优化组播获取非数值域名 ip 地址（#410）

• 🪄 优化使用旧配置文件时可能出现的新参数不存在报错问题，使用默认值

• 🐛 修复对于非规范 txt 文本转换 m3u 报错问题（#422）

• 🐛 修复 IPv6 接口获取失败问题（#452）

English

• ✨🛠 Added result preference settings:
  1. Source priority (origin_type_prefer) and quantity settings (hotel_num, multicast_num, subscribe_num, online_search_num)
  2. IPv type priority (ipv_type_prefer) and quantity settings (ipv4_num, ipv6_num)
• ✨🛠 Added control for API speed test timeout (sort_timeout) (#388)
• ✨🛠 Added control to enable or disable page service (open_service) (this configuration can be used on platforms like QingLong to stop running after task completion)
• ✨🛠 Added control to show or hide API related information (open_url_info) (#431)
• ✨ Added support for m3u address subscription sources (#389)
• ✨ Added 🏛 Classic Theater
• 🪄 Optimized Docker ARM64 FFmpeg support (it is recommended to use the requests image for some ARM devices that cannot run the driver image)
• 🪄 Optimized obtaining non-numeric domain IP addresses for multicast (#410)
• 🪄 Optimize the issue of non-existent new parameters when using old configuration files, use default values
• 🐛 Fixed issues with converting non-standard txt files to m3u format (#422)
• 🐛 Fixed issues with failing to obtain IPv6 interface information (#452)

v1.4.9

2024/10/11

• 注意：本次更新涉及配置变更，请以最新 config/config.ini 为准，工作流使用 user_config.ini 或 docker 挂载的用户请及时更新配置文件

• 新增支持 docker arm64 镜像（#369）

• 新增分辨率过滤功能（相关配置：open_filter_resolution，min_resolution）

• 新增显示更新时间（相关配置：open_update_time）

• 优化测速效率（#359）

• 优化权重值选择交互

• 调整默认模板，增加默认订阅源

• 移除央视台球部分错误组播地址

• 更新使用教程

• Warning: This update involves configuration changes. Please refer to the latest config.ini. Users of workflow using user_config.ini or Docker mounted configurations should update their configuration files promptly

• Add support for Docker ARM64 images (#369)

• Add resolution filtering feature (related configurations: open_filter_resolution, min_resolution)

• Add display of update time (related configuration: open_update_time)

• Optimize speed testing efficiency (#359)

• Optimize weight value selection interaction

• Adjust the default template and add default subscription sources

• Remove the incorrect multicast addresses for the CCTV Snooker section

• Update usage guide

v1.4.8

2024/09/27

• 默认模板增加部分频道：咪咕直播、央视付费频道、电影频道、港澳台、地方频道等

• 订阅源增加默认订阅地址

• 优化订阅源、在线搜索测速效率

• 增加汕头频道组播

• 调整默认接口数量为 30

• Add some channels to the default template: Migu Live, CCTV Pay Channels, Movie Channel, Hong Kong and Macau Channels, Local Channels, etc

• Add default subscription addresses to the subscription source

• Optimize the efficiency of subscription source and online search speed tests

• Add Shantou channel multicast

• Adjust the default number of interfaces to 30