2.0.3

1、A tree - like support lift setting function has been added. For models with tree - like support enabled, you can separately set the lift, which enhances the diversity of various usage scenarios.

2、Provide default parameters for various types of consumables for the tree-like support lifting function to ensure the printing quality after the tree-like support lifting function is enabled.
3、Add a function for setting the preheating temperature of the heated bed. By setting the preheating temperature of the heated bed, the adhesion effect of the first layer on the heated bed can be improved.

4、Provide corresponding preheating parameters for various types of consumables for the heated bed preheating function to ensure the adhesion effect of the heated bed.

2.0.2

FlsunSlicer 2.0.2

1. Added multi-plate slicing function, you can add multiple plate for model parameter adjustment, slicing and other operations. Import a multi-plate model, it will automatically recognize and add multiple plate for slicing;
   
2. Supports importing multi-color
   models, and the model color converts to the default single color after importing;
3. Optimized the Z-axis lifting logic to effectively solve the problem of scraping support (default 60, can be adjusted according to the model);
   
4. Added 14 default parameters for S1 Pro filaments;
   Corresponding filaments: Esun ePLA-Lite, FLSUN PLA-SH, ABS, ASA, PA, PC, PET, PEGT, PLA, PLA+, PLA-CF, PLA-HS, PLA-Silk, TPU-95A;
5. Optimized the default parameters for 4 filaments of T1 Pro for better printing quality;
   Corresponding filaments: PLA, PLA+, FLSUN-PLA-HS, PLA-HS;
6. Optimized the model print time algorithm for more accurate printing time estimates;
7. Fixed the problem of saving error for occasional parameter restrictions when saving parameters;
8. Added tree support parameters for S1 Pro, making model and support contacts easier to remove;
9. Added temperature control parameters for some S1 Pro filaments to effectively solve the salmon skin problem;
   Corresponding filaments: FLSUN-PLA-HS, PLA-HS, PLA, PLA+, ABS;
10. Fixed other known bugs.

2.0.1

Version Release Notes:

1. Added T1 Pro device type and the corresponding 12 filament parameters;
   

2. Optimized the filament type in the filament selection to ensure consistency with the corresponding filament type of the device;
   

3. Added online upgrade function, which can update filament parameters online and improve the timeliness of software maintenance;
   

4. Optimized the online update prompt content of the slicing software, and added the display of software update content, so that users can understand the updated content of the latest version;

Note: If clicking "Update" when prompted to update the slicing software does not work, you can choose the following operations:Users can manually download the installation package below. After downloading, simply install it directly.

2.0.0

Version Release Notes:
FlsunSlicer 2.0 has been optimized and upgraded based on the powerful OrcaSlicer, fully leveraging OrcaSlicer's strengths in slicing algorithms, model processing, and making deep optimizations in key areas according to the target user needs and device characteristics. Meanwhile, FlsunSlicer 2.0 has improved the original algorithms to achieve high-speed, high-quality printing. By combining device characteristics for firmware upgrades, it fully unleashes the hardware's outstanding performance and potential, aiming to provide users with a superior user experience.
Note: This update does not support upgrading from version 1.1.5. Please download version 2.0 from the FLSUN official website. Users can install and use both versions at the same time. (Before installing on the Mac system, please modify the desktop icon name of version 1.1.5 to avoid overwriting the old version).
Optimizations:

1. Optimize the "waveform grid" infill path to improve the overall printing speed. You can experience it by selecting the "sparse infill pattern" option.
   

2. Optimize the "Simple Cross Hatch" infill path to improve model printing quality. You can experience it by selecting the "sparse infill pattern" option.
   

3. For the FLSUN S1 model, an automatic cooling function has been added (automatic cooling when the model projection area is less than 10% of the heated bed area) to effectively reduce salmon skin phenomena. This feature takes effect after manually selecting "temperature justment".
   

4. Optimize and adjust the “Z hop threshold” to effectively control some filament stringing issues.

5. Add maximum build volume limit function for FLSUN S1 and T1 models. Slicing is not supported (the slice button is disabled) when the model build volume exceeds the maximum build volume limit set on the machine, ensuring that large models can be printed successfully.
   
   

6. Add the AB zoned heating algorithm for the FLSUN S1 model, enabling automatic activation of inner or outer ring heating during the printing process.
   

1.1.5

### What's changed

1. Add an edit function by right-clicking on the device page to modify the printer name and IP in the list.
   
   
2. Add the "Scarf joint seam" to hide the seams of cylindrical, spherical, and other types of models, and optimize the common seams to make them less obvious.
   
3. For the S1 model with small boundaries, an internal cooling switch has been added to effectively remove some models that exhibit the salmon skin phenomenon, and it is recommended to be turned on when printing large models. Sometimes, due to the reduced speed of small boundaries, some models may exhibit layer lines, and we will continue to optimize.
   

Method to enable internal cooling: Filament Settings > Cooling > Cooling Thresholds > Internal Cooling Switch.

4. Optimize the accuracy of estimated time and estimated weight to make it closer to the actual printing weight and printing time.
5. Add automatic cleanup of system profile when installing the same version.
6. Add PLA+, PLA-silk, and ordinary PLA filaments, and optimize PLA-HS, PETG, and TPU filaments.
7. Fix the bug that the program may crash when switching between different resolutions.

1.1.4

Merge branch 'main' of https://github.com/Flsun3d/FlsunSlicer

1.1.3

Merge branch 'main' of https://github.com/Flsun3d/FlsunSlicer

1.1.2

Initial commit