This initial setup must be done once only
cd <WorkingArea>
git clone [email protected]:FNAL-AC-LGAD/TestbeamReco.git
cd TestbeamReco/test
source setup.sh
./configure
make clean
make -j4
Later, everytime you make a change, must run
cd <WorkingArea>/TestbeamReco/test
source setup.sh
make -j4
Example of running MyAnalysis interactively
cd <WorkingArea>/TestbeamReco/test
source setup.sh
./MyAnalysis -A Analyze -D HPK_W5_17_2_50T_1P0_500P_50M_E600_190V -E 100001
In this example, -A selects the analyzer among a pre-defined list, -D is the dataset name (can be found in sampleCollections.cfg and sampleSets.cfg), and -E is the number of entries to analyze from the dataset (if it is not given or higher than the total, it will stop at the final entry automatically).
The analyzer returns a rough version of the plots of interest. To obtain the final plots with a defined style we use a set of python macros.
Using a sensor as reference (HPK_W5_17_2_50T_1P0_500P_50M_E600_190V), the recipe to make some plots of interest is:
cd <WorkingArea>/TestbeamReco/test
./MyAnalysis -A Analyze -D HPK_W5_17_2_50T_1P0_500P_50M_E600_190V
cd ../macros
python DoPositionRecoFit.py -D HPK_W5_17_2_50T_1P0_500P_50M_E600_190V -A --xmax 0.85 --fitOrder 5
python Plot_AmplitudeVsX.py -D HPK_W5_17_2_50T_1P0_500P_50M_E600_190V --xlength 2.7 --ylength 170.0
python Plot_SimpleXYMaps.py -D HPK_W5_17_2_50T_1P0_500P_50M_E600_190V
python Plot_CutFlow.py -D HPK_W5_17_2_50T_1P0_500P_50M_E600_190V
python Plot_Resolution1D.py -D HPK_W5_17_2_50T_1P0_500P_50M_E600_190V -t
python Plot_Efficiency.py -D HPK_W5_17_2_50T_1P0_500P_50M_E600_190V -t -x 2.7
python Plot_ResolutionXRecoVsX.py -D HPK_W5_17_2_50T_1P0_500P_50M_E600_190V -t -x 2.7
python Plot_ResolutionTimeVsX.py -D HPK_W5_17_2_50T_1P0_500P_50M_E600_190V -t -x 2.7 -y 100
The whole analysis for a specific set of sensors can be obtained by using one of the bash scripts found here.
Example:
cd <WorkingArea>/TestbeamReco/test/sh/
./runEverything2023_MayStrips.sh
Feel free to edit the lists in the scripts to run a subset only if required.