Kimiko rev2 default keymap

A split keyboard with 4x6 vertically staggered keys and thumb keys.

• 60 Per key RGB led's (SK6812 Mini-E)
  • RGB Matrix is enabled as default in rules.mk
  • the effects can be configured in config.h
  • The image below shows the positioning of switches and led as defined in the info.json. Text in the boxes:
    
    • Layout Label
      
    • Matrix Position
      
    • LED flag for type of switch
      

• Support for 1 rotary encoder per side (two possible positions)

• Support for 1 pointing device (two possible positions)

  • Pimoroni Trackball is enabled as default in rules.mk
  • can be configured in config.h, e.g. for roation at different mounting position
  • RGB lightning can be used for layer indication, but the Pimoroni Trackballmust be on the master side for this

• Support for 1 OLED display per side

  • 128x32 or 128x64 are supported
  • with 1 OLED on each side, they have to be the same
  • default configuration for 128x32 OLED
  • 128x64 OLED can be set with #define OLED_DISPLAY_128X64 in config.h (already prepared)

• Keyboard Maintainer: BenRoe @keycapsss

• Hardware Supported: Pro Micro 5V/16Mhz and compatible

• Hardware Availability: keycapsss.com Make firmware .hex for this keyboard (after setting up your build environment):

  make keycapsss/kimiko:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

• For debugging:
  • positioning of switches and led as defined in the info.json. Text in the boxes::
    
    • Layout Label
      
    • switch number in schematic
      
    • led number in schematic
      
    • led flag for type of switch