-
Notifications
You must be signed in to change notification settings - Fork 13
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
- Loading branch information
Showing
24 changed files
with
1,368 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,57 @@ | ||
| # generated by PrusaSlicer 2.3.0+win64 on 2021-01-27 at 17:04:52 UTC | ||
| bed_temperature = 100 | ||
| bridge_fan_speed = 30 | ||
| compatible_printers = | ||
| compatible_printers_condition = | ||
| compatible_prints = | ||
| compatible_prints_condition = | ||
| cooling = 1 | ||
| disable_fan_first_layers = 4 | ||
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | ||
| extrusion_multiplier = 1 | ||
| fan_always_on = 1 | ||
| fan_below_layer_time = 20 | ||
| filament_colour = #0080FF | ||
| filament_cooling_final_speed = 3.4 | ||
| filament_cooling_initial_speed = 2.2 | ||
| filament_cooling_moves = 4 | ||
| filament_cost = 16.99 | ||
| filament_density = 1.07 | ||
| filament_deretract_speed = nil | ||
| filament_diameter = 1.75 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_volumetric_speed = 11 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_notes = "" | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_retract_before_travel = nil | ||
| filament_retract_before_wipe = nil | ||
| filament_retract_layer_change = nil | ||
| filament_retract_length = nil | ||
| filament_retract_lift = nil | ||
| filament_retract_lift_above = nil | ||
| filament_retract_lift_below = nil | ||
| filament_retract_restart_extra = nil | ||
| filament_retract_speed = nil | ||
| filament_settings_id = "" | ||
| filament_soluble = 0 | ||
| filament_spool_weight = 0 | ||
| filament_toolchange_delay = 0 | ||
| filament_type = ABS | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| filament_vendor = (Unknown) | ||
| filament_wipe = nil | ||
| first_layer_bed_temperature = 100 | ||
| first_layer_temperature = 255 | ||
| full_fan_speed_layer = 0 | ||
| inherits = | ||
| max_fan_speed = 20 | ||
| min_fan_speed = 20 | ||
| min_print_speed = 15 | ||
| slowdown_below_layer_time = 15 | ||
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{else}M900 K20{endif} ; Filament gcode LA 1.0" | ||
| temperature = 255 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,57 @@ | ||
| # generated by PrusaSlicer 2.3.0+win64 on 2021-01-27 at 17:04:52 UTC | ||
| bed_temperature = 75 | ||
| bridge_fan_speed = 30 | ||
| compatible_printers = | ||
| compatible_printers_condition = | ||
| compatible_prints = | ||
| compatible_prints_condition = | ||
| cooling = 1 | ||
| disable_fan_first_layers = 3 | ||
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | ||
| extrusion_multiplier = 1 | ||
| fan_always_on = 0 | ||
| fan_below_layer_time = 20 | ||
| filament_colour = #000000 | ||
| filament_cooling_final_speed = 3.4 | ||
| filament_cooling_initial_speed = 2.2 | ||
| filament_cooling_moves = 4 | ||
| filament_cost = 55.98 | ||
| filament_density = 1.25 | ||
| filament_deretract_speed = nil | ||
| filament_diameter = 1.75 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_volumetric_speed = 5 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_notes = "" | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_retract_before_travel = 1.5 | ||
| filament_retract_before_wipe = nil | ||
| filament_retract_layer_change = nil | ||
| filament_retract_length = nil | ||
| filament_retract_lift = nil | ||
| filament_retract_lift_above = nil | ||
| filament_retract_lift_below = nil | ||
| filament_retract_restart_extra = nil | ||
| filament_retract_speed = 40 | ||
| filament_settings_id = "" | ||
| filament_soluble = 0 | ||
| filament_spool_weight = 0 | ||
| filament_toolchange_delay = 0 | ||
| filament_type = NYLON | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| filament_vendor = (Unknown) | ||
| filament_wipe = 0 | ||
| first_layer_bed_temperature = 80 | ||
| first_layer_temperature = 275 | ||
| full_fan_speed_layer = 0 | ||
| inherits = | ||
| max_fan_speed = 0 | ||
| min_fan_speed = 0 | ||
| min_print_speed = 15 | ||
| slowdown_below_layer_time = 10 | ||
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K15{else}M900 K30{endif} ; Filament gcode LA 1.0" | ||
| temperature = 275 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,57 @@ | ||
| # generated by PrusaSlicer 2.3.0+win64 on 2021-01-27 at 17:04:52 UTC | ||
| bed_temperature = 75 | ||
| bridge_fan_speed = 100 | ||
| compatible_printers = | ||
| compatible_printers_condition = | ||
| compatible_prints = | ||
| compatible_prints_condition = | ||
| cooling = 1 | ||
| disable_fan_first_layers = 1 | ||
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | ||
| extrusion_multiplier = 1 | ||
| fan_always_on = 0 | ||
| fan_below_layer_time = 20 | ||
| filament_colour = #80FF00 | ||
| filament_cooling_final_speed = 3.4 | ||
| filament_cooling_initial_speed = 2.2 | ||
| filament_cooling_moves = 4 | ||
| filament_cost = 29.99 | ||
| filament_density = 1.24 | ||
| filament_deretract_speed = nil | ||
| filament_diameter = 1.75 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_volumetric_speed = 15 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_notes = "" | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_retract_before_travel = nil | ||
| filament_retract_before_wipe = nil | ||
| filament_retract_layer_change = nil | ||
| filament_retract_length = nil | ||
| filament_retract_lift = nil | ||
| filament_retract_lift_above = nil | ||
| filament_retract_lift_below = nil | ||
| filament_retract_restart_extra = nil | ||
| filament_retract_speed = nil | ||
| filament_settings_id = "" | ||
| filament_soluble = 0 | ||
| filament_spool_weight = 0 | ||
| filament_toolchange_delay = 0 | ||
| filament_type = PLA | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| filament_vendor = (Unknown) | ||
| filament_wipe = nil | ||
| first_layer_bed_temperature = 75 | ||
| first_layer_temperature = 220 | ||
| full_fan_speed_layer = 0 | ||
| inherits = | ||
| max_fan_speed = 90 | ||
| min_fan_speed = 60 | ||
| min_print_speed = 15 | ||
| slowdown_below_layer_time = 20 | ||
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{else}M900 K30{endif} ; Filament gcode LA 1.0" | ||
| temperature = 220 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,57 @@ | ||
| # generated by PrusaSlicer 2.3.0+win64 on 2021-01-27 at 17:04:52 UTC | ||
| bed_temperature = 75 | ||
| bridge_fan_speed = 100 | ||
| compatible_printers = | ||
| compatible_printers_condition = | ||
| compatible_prints = | ||
| compatible_prints_condition = | ||
| cooling = 1 | ||
| disable_fan_first_layers = 1 | ||
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | ||
| extrusion_multiplier = 1 | ||
| fan_always_on = 1 | ||
| fan_below_layer_time = 100 | ||
| filament_colour = #80FF00 | ||
| filament_cooling_final_speed = 3.4 | ||
| filament_cooling_initial_speed = 2.2 | ||
| filament_cooling_moves = 4 | ||
| filament_cost = 18.99 | ||
| filament_density = 1.24 | ||
| filament_deretract_speed = nil | ||
| filament_diameter = 1.75 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_volumetric_speed = 15 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_notes = "" | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_retract_before_travel = nil | ||
| filament_retract_before_wipe = nil | ||
| filament_retract_layer_change = nil | ||
| filament_retract_length = nil | ||
| filament_retract_lift = nil | ||
| filament_retract_lift_above = nil | ||
| filament_retract_lift_below = nil | ||
| filament_retract_restart_extra = nil | ||
| filament_retract_speed = nil | ||
| filament_settings_id = "" | ||
| filament_soluble = 0 | ||
| filament_spool_weight = 0 | ||
| filament_toolchange_delay = 0 | ||
| filament_type = PLA | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| filament_vendor = (Unknown) | ||
| filament_wipe = nil | ||
| first_layer_bed_temperature = 75 | ||
| first_layer_temperature = 230 | ||
| full_fan_speed_layer = 0 | ||
| inherits = | ||
| max_fan_speed = 100 | ||
| min_fan_speed = 100 | ||
| min_print_speed = 15 | ||
| slowdown_below_layer_time = 20 | ||
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{else}M900 K30{endif} ; Filament gcode LA 1.0" | ||
| temperature = 230 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,57 @@ | ||
| # generated by PrusaSlicer 2.3.0+win64 on 2021-01-27 at 17:04:52 UTC | ||
| bed_temperature = 70 | ||
| bridge_fan_speed = 100 | ||
| compatible_printers = | ||
| compatible_printers_condition = | ||
| compatible_prints = | ||
| compatible_prints_condition = | ||
| cooling = 1 | ||
| disable_fan_first_layers = 1 | ||
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | ||
| extrusion_multiplier = 1 | ||
| fan_always_on = 1 | ||
| fan_below_layer_time = 100 | ||
| filament_colour = #008000 | ||
| filament_cooling_final_speed = 3.4 | ||
| filament_cooling_initial_speed = 2.2 | ||
| filament_cooling_moves = 4 | ||
| filament_cost = 16.99 | ||
| filament_density = 1.24 | ||
| filament_deretract_speed = nil | ||
| filament_diameter = 1.75 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_volumetric_speed = 15 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_notes = "" | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_retract_before_travel = nil | ||
| filament_retract_before_wipe = nil | ||
| filament_retract_layer_change = nil | ||
| filament_retract_length = nil | ||
| filament_retract_lift = nil | ||
| filament_retract_lift_above = nil | ||
| filament_retract_lift_below = nil | ||
| filament_retract_restart_extra = nil | ||
| filament_retract_speed = nil | ||
| filament_settings_id = "" | ||
| filament_soluble = 0 | ||
| filament_spool_weight = 0 | ||
| filament_toolchange_delay = 0 | ||
| filament_type = PLA | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| filament_vendor = (Unknown) | ||
| filament_wipe = nil | ||
| first_layer_bed_temperature = 70 | ||
| first_layer_temperature = 225 | ||
| full_fan_speed_layer = 0 | ||
| inherits = | ||
| max_fan_speed = 95 | ||
| min_fan_speed = 95 | ||
| min_print_speed = 15 | ||
| slowdown_below_layer_time = 20 | ||
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{else}M900 K30{endif} ; Filament gcode LA 1.0" | ||
| temperature = 225 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,57 @@ | ||
| # generated by PrusaSlicer 2.3.0+win64 on 2021-01-27 at 17:04:52 UTC | ||
| bed_temperature = 90 | ||
| bridge_fan_speed = 30 | ||
| compatible_printers = | ||
| compatible_printers_condition = | ||
| compatible_prints = | ||
| compatible_prints_condition = | ||
| cooling = 1 | ||
| disable_fan_first_layers = 6 | ||
| end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" | ||
| extrusion_multiplier = 1 | ||
| fan_always_on = 0 | ||
| fan_below_layer_time = 20 | ||
| filament_colour = #808080 | ||
| filament_cooling_final_speed = 3.4 | ||
| filament_cooling_initial_speed = 2.2 | ||
| filament_cooling_moves = 4 | ||
| filament_cost = 59.98 | ||
| filament_density = 1.12 | ||
| filament_deretract_speed = nil | ||
| filament_diameter = 1.75 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_volumetric_speed = 6 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_notes = "" | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_retract_before_travel = nil | ||
| filament_retract_before_wipe = nil | ||
| filament_retract_layer_change = nil | ||
| filament_retract_length = 0.3 | ||
| filament_retract_lift = nil | ||
| filament_retract_lift_above = nil | ||
| filament_retract_lift_below = nil | ||
| filament_retract_restart_extra = nil | ||
| filament_retract_speed = nil | ||
| filament_settings_id = "" | ||
| filament_soluble = 0 | ||
| filament_spool_weight = 0 | ||
| filament_toolchange_delay = 0 | ||
| filament_type = NYLON | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| filament_vendor = (Unknown) | ||
| filament_wipe = nil | ||
| first_layer_bed_temperature = 90 | ||
| first_layer_temperature = 265 | ||
| full_fan_speed_layer = 0 | ||
| inherits = | ||
| max_fan_speed = 0 | ||
| min_fan_speed = 0 | ||
| min_print_speed = 15 | ||
| slowdown_below_layer_time = 20 | ||
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.05{else}0.1{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K28{else}M900 K48{endif} ; Filament gcode LA 1.0" | ||
| temperature = 260 |
Oops, something went wrong.