⚠️⚠️⚠️ Insecure and unmaintained! ⚠️⚠️⚠️

This gem should not be used, it is vulnerable to SSL man in the middle attacks as documented here: #25. Pull requests for fixes are most welcome!

---

An EventMachine based IMAP client.

Installation

gem install em-imap

Usage

This document tries to introduce concepts of IMAP alongside the facilities of the library that handle them, to give you an idea of how to perform basic IMAP operations. IMAP is more fully explained in RFC3501, and the details of the library are of course in the source code.

Connecting

Before you can communicate with an IMAP server, you must first connect to it. There are three connection parameters, the hostname, the port number, and whether to use SSL/TLS. As with every method in EM::IMAP, EM::IMAP::Client#connect returns a deferrable enhanced by the deferrable_gratification library.

For example, to connect to Gmail's IMAP server, you can use the following snippet:

    require 'rubygems'
    require 'em-imap'

    EM::run do
      client = EM::IMAP.new('imap.gmail.com', 993, true)
      client.connect.errback do |error|
        puts "Connecting failed: #{error}"
      end.callback do |hello_response|
        puts "Connecting succeeded!"
      end.bothback do
        EM::stop
      end
    end

Authenticating

There are two authentication mechanisms in IMAP, LOGIN and AUTHENTICATE, exposed as two methods on the EM::IMAP client, .login(username, password) and .authenticate(mechanism, *args). Again these methods both return deferrables, and the cleanest way to tie deferrables together is to use the .bind! method from deferrable_gratification.

Extending our previous example to also log in to Gmail:

    client = EM::IMAP.new('imap.gmail.com', 993, true)
    client.connect.bind! do
      client.login("[email protected]", ENV["GMAIL_PASSWORD"])
    end.callback do
      puts "Connected and logged in!"
    end.errback do |error|
      puts "Connecting or logging in failed: #{error}"
    end

The .authenticate method is more advanced and uses the same extensible mechanism as Net::IMAP. The two mechanisms supported by default are 'LOGIN' and 'CRAM-MD5', other mechanisms are provided by gems like gmail_xoauth.

Mailbox-level IMAP

Once the authentication has completed successfully, you can perform IMAP commands that don't require a currently selected mailbox. For example to get a list of the names of all Gmail mailboxes (including labels):

    client = EM::IMAP.new('imap.gmail.com', 993, true)
    client.connect.bind! do
      client.login("[email protected]", ENV["GMAIL_PASSWORD"])
    end.bind! do
      client.list
    end.callback do |list|
      puts list.map(&:name)
    end.errback do |error|
      puts "Connecting, logging in or listing failed: #{error}"
    end

The useful commands available to you at this point are .list, .create(mailbox), .delete(mailbox), .rename(old_mailbox, new_mailbox), .status(mailbox). .select(mailbox) and .examine(mailbox) are discussed in the next section, and .subscribe(mailbox), .unsubscribe(mailbox), .lsub and .append(mailbox, message, flags?, date_time) are unlikely to be useful to you immediately. For a full list of IMAP commands, and detailed considerations, please refer to RFC3501.

Message-level IMAP

In order to do useful things which actual messages, you need to first select a mailbox to interact with. There are two commands for doing this, .select(mailbox), and .examine(mailbox). They are the same except that .examine opens a mailbox in read-only mode; so that no changes are made (i.e. performing commands doesn't mark emails as read).

For example to search for all emails relevant to em-imap in Gmail:

    client = EM::IMAP.new('imap.gmail.com', 993, true)
    client.connect.bind! do
      client.login("[email protected]", ENV["GMAIL_PASSWORD"])
    end.bind! do
      client.select('[Google Mail]/All Mail')
    end.bind! do
      client.search('ALL', 'SUBJECT', 'em-imap')
    end.callback do |results|
      puts results
    end.errback do |error|
      puts "Something failed: #{error}"
    end

Once you have a list of message sequence numbers, as returned by search, you can actually read the emails with .fetch:

    client = EM::IMAP.new('imap.gmail.com', 993, true)
    client.connect.bind! do
      client.login("[email protected]", ENV["GMAIL_PASSWORD"])
    end.bind! do
      client.select('[Google Mail]/All Mail')
    end.bind! do
      client.search('ALL', 'SUBJECT', 'em-imap')
    end.bind! do |results|
      client.fetch(results, 'BODY[TEXT]')
    end.callback do |emails|
      puts emails.map{|email| email.attr['BODY[TEXT]'] }
    end.errback do |error|
      puts "Something failed: #{error}"
    end

The useful commands available to you at this point are .search(*args), .expunge, .fetch(messages, attributes), .store(messages, name, values) and .copy(messages, mailbox). If you'd like to work with UIDs instead of sequence numbers, there are UID based alternatives: .uid_search, .uid_fetch, .uid_store and .uid_copy. The .close command and .check command are unlikely to be useful to you immediately.

Untagged responses

IMAP has the notion of untagged responses (aka. unsolicited responses). The idea is that sometimes when you run a command you'd like to be updated on the state of the mailbox with which you are interacting, even though notification isn't always required. To listen for these responses, the deferrables returned by each client method have a .listen(&block) method. All responses received by the server, up to and including the response that completes the current command will be passed to your block.

For example, we could insert a listener into the above example to find out some interesting numbers:

    end.bind! do
      client.select('[Google Mail]/All Mail').listen do |response|
        case response.name
        when "EXISTS"
          puts "There are #{response.data} total emails in All Mail"
        when "RECENT"
          puts "There are #{response.data} new emails in All Mail"
        end
      end
    end.bind! do

Concurrency

IMAP is an explicitly concurrent protocol: clients MAY send commands without waiting for the previous command to complete, and servers MAY send any untagged response at any time.

If you want to receive server responses at any time, you can call .add_response_handler(&block) on the client. This returns a deferrable like the IDLE command, on which you can call stop to stop receiving responses (which will cause the deferrable to succeed). You should also listen on the errback of this deferrable so that you know when the connection is closed:

    handler = client.add_response_handler do |response|
      puts "Server says: #{response}"
    end.errback do |e|
      puts "Connection closed?: #{e}"
    end
    EM::Timer.new(600){ handler.stop }

If you want to send commands without waiting for previous replies, you can also do so. em-imap handles the few cases where this is not permitted (for example, during an IDLE command) by queueing the command until the connection becomes available again. If you do this, bear in mind that any blocks that are listening on the connection may receive responses from multiple commands interleaved.

    client = EM::Imap.new('imap.gmail.com', 993, true)
    client.connect.callback do
      logger_in = client.login('[email protected]', ENV["GMAIL_PASSWORD"])
      selecter = client.select('[Google Mail]/All Mail')
      searcher = client.search('from:[email protected]').callback do |results|
        puts results
      end

      logger_in.errback{ |e| selecter.fail e }
      selecter.errback{ |e| searcher.fail e }
      searcher.errback{ |e| "Something failed: #{e}" }
    end

IDLE

IMAP has an IDLE command (aka push-email) that lets the server notify the client when there are new emails to be read. This command is exposed at a low-level, but it's quite hard to use directly. Instead you can simply ask the client to wait_for_new_emails(&block). This takes care of re-issuing the IDLE command every 29 minutes, in addition to ensuring that the connection isn't IDLEing while you're trying to process the results.

    client = EM::IMAP.new('imap.gmail.com', 993, true)
    client.connect.bind! do
      client.login("[email protected]", ENV["GMAIL_PASSWORD"])
    end.bind! do
      client.select('INBOX')
    end.bind! do

      client.wait_for_new_emails do |response|
        client.fetch(response.data).callback{ |fetched| puts fetched.inspect }
      end

    end.errback do |error|
      puts "Something failed: #{error}"
    end

The block you pass to wait_for_new_emails should return a deferrable. If that deferrable succeeds then the IDLE loop will continue, if that deferrable fails then the IDLE loop will also fail. If you don't return a deferrable, it will be assumed that you didn't want to handle the incoming email, and IDLEing will be immediately resumed.

TODO

em-imap is still very much a work-in-progress, and the API will change as time goes by.

Before version 1, at least the following changes should be made:

1. Stop using Net::IMAP in quite so many bizarre ways, probably clearer to copy-paste the code and rename relevant classes (particular NoResponseError..)
2. Find a nicer API for some commands (maybe some objects to represent mailboxes, and/or messages?)
3. Document argument serialization.
4. Support SORT and THREAD.
5. Put the in-line documentation into a real format.

Breaking Changes

Between Version 0.1(.x) and 0.2, the connection setup API changed. Previously you would call EM::IMAP.connect, now that is broken into two steps: EM::IMAP.new and EM::IMAP::Client#connect as documented above. This makes it less likely people will write client = connect.bind! by accident, and allows you to bind to the errback of the connection as a whole should you wish to.

Meta-foo

Em-imap is made available under the MIT license, see LICENSE.MIT for details

Patches and pull-requests are welcome.