Home

Welcome to the YAGSL wiki!

Getting Started

YAGSL can be utilized to generate a Swerve Drive for MAX Swerve, SDS MK4i, and SDS MK4 it uses generic. This can be configured via JSON for ease.

Deploy Directory

The deploy directory is used to add arbitrary files to the robot code, YAGSL uses this directory to store swerve module configurations. To get the location of the deploy directory you should use the function Filesystem.getDeployDirectory(). Swerve Drive initialization requires certain files and folders to be present in whichever directory you define as the "JSONDirectory" the folders are "modules", "modules/back", and "modules/front". The files required to be present in the directory are "swerve.json", "modules/back/left.json", "modules/back/right.json", "modules/front/left.json", and "modules/front/right.json". Below is an example of what a swerve "JSONDirectory" looks like in "deploy/swerve" (new File(Filesystem.getDeployDirectory(), "swerve"))

├── src
│   └── main
│       ├── deploy
│       │   ├── example.txt
│       │   └── swerve
│       │       ├── modules
│       │       │   ├── back
│       │       │   │   ├── left.json
│       │       │   │   └── right.json
│       │       │   └── front
│       │       │       ├── left.json
│       │       │       └── right.json
│       │       └── swerve.json
...

JSON Files

JSON stands for "JavaScript Object Notation" it is a popular format for configuration, and string data representation. Learn more here

Creating a swerve drive.

• Install CTRE and REV vendor dependencies.
• Clone YAGSL. git clone https://github.com/BroncBotz3481/YAGSL
• Move swervelib into src/main/frc/java/subsystems/swervedrive/swerve
• Copy example JSON directory or create your own then move it into src/main/frc/deploy/swerve
• Create SwerveDrive from JSON directory via new File(Filesystem.getDeployDirectory(), "swerve")
• View the java docs in docs/index.html
• Experiment!

---

What is swerve.json?

swerve.json stores the robot wide configuration options. The configurations in swerve.json are as follows.

Name	Units	Required	Description
WheelBase	Inches	✔️	The distance between the centers of the front and back wheels of the robot in inches.
TrackWidth	Inches	✔️	The distance between the centers of the right and left wheels of the robot in inches.
WheelDiamter	Inches	✔️	The diameter of the wheels for the swerve modules in inches.
Speed	Dictionary	✔️	Contains the physical and virtual speed limitations of the swerve drive.
Acceleration	Dictionary	✔️	Contains the acceleration limitations for driver control via SlewRateLimiters.
Drive	Dictionary	✔️	Contains the global configurations that apply to all drive motors on the swerve drive.
Steer	Dictionary	✔️	Contains the global configurations that apply to all of the steering motors on the swerve drive.
Gyro	Dictionary	✔️	Contains the configuration for the gyroscope, currently the only supported gyroscope is the Pigeon2.
Initial Pose	Dictionary	✔️	Contains the configuration for the initial pose of the robot in inches and degrees.

Speed

Name	Units	Required	Description
MetersPerSecond	double	✔️	Virtual speed limitation for the driver when controlling the swerve drive for both forward and strafe directions.
PhysicalMetersPerSecond	double	✔️	The speed limitation to ensure the wheels to not exceed on every module.
RadianPerSecond	double	✔️	The angular speed which the swerve drive should be able to achieve. Multiplied by PI internally.

Acceleration

Name	Units	Required	Description
MetersPerSecond	double	✔️	Virtual acceleration limitation for the driver when controlling the swerve drive for both forward and strafe directions. Used with SlewRateLimiter.
RadianPerSecond	double	✔️	The angular acceleration which the swerve drive should be able to achieve. Multiplied by PI internally and used with SlewRateLimiter.

Drive

Name	Units	Required	Description
Inverted	boolean	✔️	Whether or not the drive motors for the swerve drive are inverted. Also possible to call the setInverted function on the module drive motors.
GearRatio	double	✔️	The gear ratio in which the drive motor must turn in order for a complete rotation of the wheel.
MaxPower	Percentage	✔️	The maximum output drive motor controllers should supply. Useful for tuning the robot power consumption to lower risk of brown outs.
CurrentLimit	Amps	❌	Optional configuration setting. The current limit that the motor controller should abide by.
PID	Dictionary	❌	Optional configuration setting. Supplies the values for PID that would be used for all onboard drive motor PID's of swerve modules.

Steer

Name	Units	Required	Description
Inverted	boolean	✔️	Whether or not the steering motors for the swerve drive are inverted.
GearRatio	double	✔️	The gear ratio in which the steering motor must turn in order for a complete rotation of the wheel.
MaxPower	Percentage	✔️	The maximum output steering motor controllers should supply. Useful for tuning the robot power consumption to lower risk of brown outs.
CurrentLimit	Amps	❌	Optional configuration setting. The current limit that the motor controller should abide by.
PID	Dictionary	❌	Optional configuration setting. Supplies the values for PID that would be used for all onboard drive motor PID's of swerve modules.

Gyro

Name	Units	Required	Description
Inverted	boolean	✔️	Whether or not the gyroscope for the swerve drive are inverted.
Type	String	✔️	Must be "Pigeon2" currently since no other gyroscope is supported yet.
ID	CAN ID	✔️	The CAN ID for the Pigeon2.
CANBus	String	❌	Optional CAN Bus name in which the Pigeon2 is current residing on.

InitialPose

Name	Units	Required	Description
X	Inches	✔️	The distance from your alliance wall to the center of your robot in inches.
Y	Inches	✔️	The distance from the field wall to the center of your robot in inches.
Rotation	Degrees	✔️	The rotation of your robot on the field on the field when facing away from the alliance wall.

PID

Name	Units	Required	Description
P	double	✔️	Proportional gain for closed loop. This is multiplied by closed loop error in sensor units.
I	double	✔️	Integral gain for closed loop. This is multiplied by closed loop error in sensor units every PID loop.
D	double	✔️	Derivative gain for closed loop. This is multiplied by derivative error (sensor units per PID loop).
F	double	✔️	Feedforward gain for closed loop.
IntegralZone	double	✔️	Integral Zone can be used to auto clear the integral accumulator if the sensor position is too far from the target. This prevents unstable oscillation if the kI is too large. Value is in sensor units.

Set the PIDF coefficients for the closed loop PID onboard the motor controller. Tuning the PID P = .5 and increase it by .1 until oscillations occur, then decrease by .05 then .005 until oscillations stop and angle is perfect or near perfect. I = 0 tune this if your PID never quite reaches the target, after tuning D. Increase this by P*.01 each time and adjust accordingly. D = 0 tune this if the PID accelerates too fast, it will smooth the motion. Increase this by P*10 and adjust accordingly. F = 0 tune this if the PID is being used for velocity, the F is multiplied by the target and added to the voltage output. Increase this by 0.01 until the PIDF reaches the desired state in a fast enough manner. Documentation for this is best described by CTRE here

What is modules/back/left.json modules/back/right.json modules/front/left.json and modules/front/right.json

Name	Units	Required	Description
IntegratedAbsoluteEncoder	boolean	❌	Whether or not the absolute encoder is integrated into the motor controller via expansion port. Currently this only works with the SparkMax to fetch the attached DutyCycle AbsoluteEncoder.
AbsoluteEncoder	Dictionary	✔️	The absolute encoder configuration.
Motor	Dictionary	✔️	The motor configuration options.

AbsoluteEncoder

Name	Units	Required	Description
Type	String	✔️	The absolute encoder type, current options are CANCoder,ThriftyBot,AnalogEncoder,SRXMagEncoder,REVThoroughbore. If the encoder is integrated put anything else in.
ID	CAN/Channel ID	✔️	The CAN ID for CANCoders, or the Channel ID for other encoders.
Offset	Degrees	✔️	The offset in degrees for the motor to be at 0.
CANBus	String	❌	Optional configuration setting to define the can bus of the CANCoder if on a CANivore.

Motor

Name	Units	Required	Description
Drive	Dictionary	✔️	The drive motor configuration for the module.
Steer	Dictionary	✔️	The steering motor configuration for the module.

MotorDrive

Name	Units	Required	Description
Type	String	✔️	The motor type, current options are "Neo" or "Falcon".
ID	CAN ID	✔️	The CAN ID for the motor controller.
CANBus	String	❌	Optional configuration setting to define the can bus of the Falcon if on a CANivore.
PID	Dictionary	❌	Optional configuration setting. Supplies the values for PID that would be used for the motor.

MotorSteer

Name	Units	Required	Description
Type	String	✔️	The motor type, current options are "Neo" or "Falcon".
ID	CAN ID	✔️	The CAN ID for the motor controller.
CANBus	String	❌	Optional configuration setting to define the can bus of the Falcon if on a CANivore.
FreeSpeedRPM	integer	✔️	The free speed RPM of the motor, used for feedforward calculation of the PID.
PID	Dictionary	❌	Optional configuration setting. Supplies the values for PID that would be used for the motor.