Added LilyGo TTV variants

User_Setup_Select.h

@@ -78,6 +78,8 @@
 
 //#include <User_Setups/Setup135_ST7789.h>           // Setup file for ESP8266 and ST7789 135 x 240 TFT
 
+//#include <User_Setups/Setup136_LilyGo_TTV.h>       // Setup file for ESP32 and Lilygo TTV ST7789 SPI bus TFT  135x240
+
 //#include <User_Setups/Setup200_GC9A01.h>           // Setup file for ESP32 and GC9A01 240 x 240 TFT
 
 //#include <User_Setups/SetupX_Template.h>

User_Setups/Setup136_LilyGo_TTV.h

@@ -0,0 +1,34 @@
+// ST7789 135 x 240 display with no chip select line
+
+#define ST7789_DRIVER     // Configure all registers
+
+#define TFT_WIDTH  135
+#define TFT_HEIGHT 240
+
+#define CGRAM_OFFSET      // Library will add offsets required
+
+// Generic ESP32 setup
+//#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_CS    5 
+#define TFT_DC    19
+#define TFT_RST   4  
+
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+#define SMOOTH_FONT
+
+
+// #define SPI_FREQUENCY  27000000
+#define SPI_FREQUENCY  40000000
+
+// #define SUPPORT_TRANSACTIONS