Skip to content

ESP8266 (NodeMCU V3 LoLin) break-out PCB for Smart Home setups.

Notifications You must be signed in to change notification settings

BigHomie90/ESP8266-Multi-Breakout

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

27 Commits
 
 
 
 
 
 
 
 

Repository files navigation

ESP8266-Multi-Breakout

ESP-Breakout.png

This is an ESP8266 NodeMCU V3 LoLin break-out PCB I've created for use with Home Assistant. I created this layout to allow for various functions; a garage door opener or retrofitting to a 'dumb' alarm system to integrate existing PIRs into your smart home setup.

The board will accept a +12VDC, 1A input via a 2.1MM centre positive jack. This voltage is regulated down to +5VDC via the onboard AMS1117-5.0 linear regulator to feed power to the two +5V relays and the NodeMCU V3.

The board also accommodates the following sensors:

DHT22 - Temperature and Humidity sensor

HC-SR04 - Ultrasonic distance sensor

Aside from the above, a LM339N is also available onboard and powered by the +12VDC input. This can be used to integrate your existing alarm system, to make use of the PIRs as binary sensors for motion detection without affecting the functionality of the original system. See here for more information.

Pin out as follows:

Pin Function Comment
D0 N/A Not used
D1 Z1 or DHT22 input Only single input allowed
D2 Z2 or other input Input/output
D3 Z3 or other input Input/output
D4 Z4 or other input Input/output
D5 HC-SR04 (Trig) Ultrasonic distance sensor (if used)
D6 HC-SR04 (Echo) Ultrasonic distance sensor (if used)
D7 Relay #1 Relay #1 trigger
D8 Relay #2 Relay #2 trigger

See here for pin reference.

Integration to Home Assistant can be done using the esphomeyaml library.

This design was created using Eagle 7.3.

About

ESP8266 (NodeMCU V3 LoLin) break-out PCB for Smart Home setups.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Game Maker Language 100.0%