added docs

.gitignore

@@ -1,6 +1,7 @@
 .DS_Store
 .vscode
 mypy_report
+docs/build
 
 # Byte-compiled / optimized / DLL files
 __pycache__/

docs/Makefile

@@ -0,0 +1,20 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line, and also
+# from the environment for the first two.
+SPHINXOPTS    ?=
+SPHINXBUILD   ?= sphinx-build
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

docs/make.bat

@@ -0,0 +1,35 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.http://sphinx-doc.org/
+	exit /b 1
+)
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+
+:end
+popd

docs/source/conf.py

@@ -0,0 +1,68 @@
+# Configuration file for the Sphinx documentation builder.
+#
+# This file only contains a selection of the most common options. For a full
+# list see the documentation:
+# https://www.sphinx-doc.org/en/master/usage/configuration.html
+
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+# import os
+# import sys
+# sys.path.insert(0, os.path.abspath('.'))
+
+
+# -- Project information -----------------------------------------------------
+
+
+import pkg_resources
+
+import sphinx_rtd_theme
+
+html_theme = "sphinx_rtd_theme"
+
+html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
+
+project = "Rich"
+copyright = "2019, Will McGugan"
+author = "Will McGugan"
+
+# The full version, including alpha/beta/rc tags
+release = pkg_resources.get_distribution("rich").version
+
+
+# -- General configuration ---------------------------------------------------
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    "sphinx.ext.autodoc",
+    "sphinx.ext.viewcode",
+    "sphinx.ext.napoleon",
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ["_templates"]
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path.
+exclude_patterns = []
+
+
+# -- Options for HTML output -------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+# html_theme = "alabaster"
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ["_static"]
+

docs/source/index.rst

@@ -0,0 +1,20 @@
+.. Rich documentation master file, created by
+   sphinx-quickstart on Thu Dec 26 17:03:20 2019.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+Welcome to Rich's documentation!
+================================
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Contents:
+
+   reference.rst
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`

docs/source/reference.rst

@@ -0,0 +1,8 @@
+Reference
+=========
+
+.. toctree::
+   :maxdepth: 3
+
+   reference/console.rst
+

docs/source/reference/console.rst

@@ -0,0 +1,5 @@
+rich.console
+============
+
+.. automodule:: rich.console
+    :members: Console

make.bat

@@ -0,0 +1,35 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.http://sphinx-doc.org/
+	exit /b 1
+)
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+
+:end
+popd

rich/console.py

@@ -159,7 +159,7 @@ def __init__(
         color_system: Optional[
             Literal["auto", "standard", "256", "truecolor"]
         ] = "auto",
-        styles: Dict[str, Style] = DEFAULT_STYLES,
+        styles: Dict[str, Style] = None,
         file: IO = None,
         width: int = None,
         height: int = None,
@@ -170,7 +170,7 @@ def __init__(
         log_time_format: str = "[%X] ",
     ):
 
-        self._styles = ChainMap(styles)
+        self._styles = ChainMap(DEFAULT_STYLES if styles is None else styles)
         self.file = file or sys.stdout
         self._width = width
         self._height = height
@@ -249,7 +249,7 @@ def is_terminal(self) -> bool:
         
         Returns:
             bool: True if the console writting to a device capable of
-                understanding terminal codes, otherwise False.
+            understanding terminal codes, otherwise False.
         """
         isatty = getattr(self.file, "isatty", None)
         return False if isatty is None else isatty()
@@ -722,7 +722,7 @@ def export_html(
         self,
         theme: Theme = None,
         clear: bool = True,
-        code_format=CONSOLE_HTML_FORMAT,
+        code_format: str = None,
         inline_styles: bool = False,
     ) -> str:
         """Generate HTML from console contents (requires record=True argument in constructor).
@@ -747,6 +747,8 @@ def export_html(
         _theme = theme or themes.DEFAULT
         stylesheet = ""
 
+        render_code_format = CONSOLE_HTML_FORMAT if code_format is None else code_format
+
         if inline_styles:
             for text, style in Segment.simplify(self._record_buffer):
                 if style:
@@ -773,7 +775,7 @@ def export_html(
                     stylesheet_append(f".r{style_number} {{{style_rule}}}")
             stylesheet = "\n".join(stylesheet_rules)
 
-        rendered_code = code_format.format(
+        rendered_code = render_code_format.format(
             code="".join(fragments),
             stylesheet=stylesheet,
             foreground=_theme.foreground_color.hex,