Skip to content

Amiga 4000 Replica project. Based on the A4000 Rev B and funded by Paul Rezendes and the generous contributions of the Amiga Community.

License

Notifications You must be signed in to change notification settings

Acill/A4000RevB

Repository files navigation

A4000 Replica Project (Based on the Rev B)

Amiga 4000 Replica project. Based on the A4000 Rev B and organized by Paul Rezendes and the generous contributions of the Amiga Community.

*** IF YOU WISH TO PRODUCE YOUR OWN BOARDS PLEASE USE THE NEW GERBERS LOCATED HERE: https://github.com/Acill/A4000RevB/tree/master/Gerbers-JLCPCB ***

IF YOU PRODUCE BOARDS USING ORIGINAL PROJECT FILES YOU MUST TELL THE FACTORY TO IMPORT THE GERBERS AS A MENTOR PADS FORMAT PROJECT

Thank you Chucky for the locator build hosting! I recomend all go here during your builds for some great help! A4000 Locator Site: http://locator.reamiga.info/locator.php?project=A4000

A4000 Build Guide, Thanks to Chucky! https://wordpress.hertell.nu/?p=1053

Shred made a great repo for an updated BOM. Thank you! Please visit the new BOM here: https://shred.github.io/a4000-bom/

READ THIS: New board files and gerbers have been created and posted to the Github project page. A minor error was discovered that had solder mask covering the ground pads for the support bracket on the mouse and joystick ports. Previous boards work just fine and are not in danger of not working. This is more of a cosmetic update than anything else. Get the new file in the Gerber folder. When using the Chinese sites like JLPCB and PCBway you will need to upload the complete zip gerber archive and email them about the board design. It is done in Mentor PADs. This is a professional layout and it will not usually work with the automatic software they use. I have produced these here in the US and have no problems. Others have used JLPCB with no problems as well. I f you would like a single board and need help I can order sets of 5 and would be happy to sell you one. You can email me through the contact page or directly at [email protected] and request one. Currently they run $95 shipped in the USA and $110 international.

Images

About

Amiga 4000 Replica project. Based on the A4000 Rev B and funded by Paul Rezendes and the generous contributions of the Amiga Community.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published