Printer Attack

Detect printers with open port 9100 on the connected network.
Print files stored on the SD card to detected printers.
Check printer status using SNMP for toner levels, paper status, and device errors.

Features

1. Detect Printers

• Automatically scans the currently connected network for printers with an open port 9100 (commonly used for raw printing).
• Identifies potentially vulnerable printers based on network responses.

2. Print Files

• Sends files stored on the device (e.g., SD card) to all detected printers for printing.
• Supports raw file printing through port 9100.

⚠️ **Please use this tool ethically.**

3. Check Printer Status

• Uses SNMP (Simple Network Management Protocol) to retrieve detailed information about detected printers, including:
  • Toner Levels
  • Paper Status
  • Device Errors
• Allows for better monitoring and understanding of the target printers' states.

4. Manual Printer Management

• Add printers manually to the list of targets to scan or perform actions on printers outside the current IP range.
• This is useful for targeting specific devices or networks that aren't automatically detected.

---

Workflow

Automatic Detection

1. Start the tool to scan the current network.
2. Detect printers with open port 9100.
3. Automatically list all possible vulnerable printers.

File Printing

1. Send files to all detected printers.(File-To-Print.txt).
2. Monitor the printers for successful printing if possible.

Printer Status Check

1. Use SNMP queries to gather details about detected printers.
2. Retrieve:
   • Current toner and paper levels.
   • Device status and error messages.
3. Log or display the printer status for later reference.

Manual Printer Management

1. Add printers manually by specifying their IP addresses.PrinterIp.txt
2. Perform print on manually added printers.