Qwik App ⚡️

• Qwik Docs
• Discord
• Qwik GitHub
• @QwikDev
• Vite
• Partytown
• Mitosis
• Builder.io

---

Project Structure

Inside your project, you'll see the following directory structure:

├── public/
│   └── ...
└── src/
    ├── components/
    │   └── ...
    └── routes/
        └── ...

• src/routes: Provides the directory based routing, which can include a hierarchy of layout.tsx layout files, and an index.tsx file as the page. Additionally, index.ts files are endpoints. Please see the routing docs for more info.

• src/components: Recommended directory for components.

• public: Any static assets, like images, can be placed in the public directory. Please see the Vite public directory for more info.

Add Integrations

Use the npm run qwik add command to add additional integrations. Some examples of integrations include: Cloudflare, Netlify or Vercel server, and the Static Site Generator (SSG).

npm run qwik add # or `yarn qwik add`

Development

Development mode uses Vite's development server. During development, the dev command will server-side render (SSR) the output.

npm run dev # or `yarn dev`

Note: during dev mode, Vite may request a significant number of .js files. This does not represent a Qwik production build.

Preview

The preview command will create a production build of the client modules, a production build of src/entry.preview.tsx, and run a local server. The preview server is only for convenience to locally preview a production build, and it should not be used as a production server.

npm run preview # or `yarn preview`

Production

The production build will generate client and server modules by running both client and server build commands. Additionally, the build command will use Typescript to run a type check on the source code.

npm run build # or `yarn build`

Express Server

This app has a minimal Express server implementation. After running a full build, you can preview the build using the command:

npm run serve

Then visit http://localhost:8080/

Netlify

This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.

Local development

The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:

1. install Netlify CLI globally npm i -g netlify-cli
2. Build your site both ssr and client npm run build.
3. Start a local server with npm run serve. In this project, npm run serve uses the netlify dev command to spin up a server that can handle Netlify's Edge Functions locally.
4. Visit http://localhost:8888/ to check out your site.

Deployments

You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.

Deploying via Git

Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:

netlify link

This sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..

Deploying manually via the CLI

If you wish to deploy from the CLI rather than using Git, you can use the command:

netlify deploy --build

You must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.

Add --prod flag to deploy to production.

Static Site Generator (Node.js)

npm run ssg

Netlify

This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.

Local development

The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:

1. install Netlify CLI globally npm i -g netlify-cli
2. Build your site both ssr and client npm run build.
3. Start a local server with npm run serve. In this project, npm run serve uses the netlify dev command to spin up a server that can handle Netlify's Edge Functions locally.
4. Visit http://localhost:8888/ to check out your site.

Deployments

You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.

Deploying via Git

Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:

netlify link

This sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..

Deploying manually via the CLI

If you wish to deploy from the CLI rather than using Git, you can use the command:

netlify deploy --build

You must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.

Add --prod flag to deploy to production.

Netlify

This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.

Local development

The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:

1. install Netlify CLI globally npm i -g netlify-cli
2. Build your site both ssr and client npm run build.
3. Start a local server with npm run serve. In this project, npm run serve uses the netlify dev command to spin up a server that can handle Netlify's Edge Functions locally.
4. Visit http://localhost:8888/ to check out your site.

Deployments

You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.

Deploying via Git

Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:

netlify link

This sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..

Deploying manually via the CLI

If you wish to deploy from the CLI rather than using Git, you can use the command:

netlify deploy --build

You must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.

Add --prod flag to deploy to production.

Netlify

This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.

Local development

The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:

1. install Netlify CLI globally npm i -g netlify-cli
2. Build your site both ssr and client npm run build.
3. Start a local server with npm run serve. In this project, npm run serve uses the netlify dev command to spin up a server that can handle Netlify's Edge Functions locally.
4. Visit http://localhost:8888/ to check out your site.

Deployments

You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.

Deploying via Git

Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:

netlify link

This sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..

Deploying manually via the CLI

If you wish to deploy from the CLI rather than using Git, you can use the command:

netlify deploy --build

You must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.

Add --prod flag to deploy to production.

Netlify

This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.

Local development

The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:

1. install Netlify CLI globally npm i -g netlify-cli
2. Build your site both ssr and client npm run build.
3. Start a local server with npm run serve. In this project, npm run serve uses the netlify dev command to spin up a server that can handle Netlify's Edge Functions locally.
4. Visit http://localhost:8888/ to check out your site.

Deployments

You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.

Deploying via Git

Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:

netlify link

This sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..

Deploying manually via the CLI

If you wish to deploy from the CLI rather than using Git, you can use the command:

netlify deploy --build

You must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.

Add --prod flag to deploy to production.

Cloudflare Pages

Cloudflare's wrangler CLI can be used to preview a production build locally. To start a local server, run:

npm run serve

Then visit http://localhost:8787/

Deployments

Cloudflare Pages are deployable through their Git provider integrations.

If you don't already have an account, then create a Cloudflare account here. Next go to your dashboard and follow the Cloudflare Pages deployment guide.

Within the projects "Settings" for "Build and deployments", the "Build command" should be npm run build, and the "Build output directory" should be set to dist.

Netlify

This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.

Local development

The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:

1. install Netlify CLI globally npm i -g netlify-cli
2. Build your site both ssr and client npm run build.
3. Start a local server with npm run serve. In this project, npm run serve uses the netlify dev command to spin up a server that can handle Netlify's Edge Functions locally.
4. Visit http://localhost:8888/ to check out your site.

Deployments

You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.

Deploying via Git

Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:

netlify link

This sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..

Deploying manually via the CLI

If you wish to deploy from the CLI rather than using Git, you can use the command:

netlify deploy --build

You must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.

Add --prod flag to deploy to production.