install.txt

INSTALLATION GUIDE FOR ASUS WL-500G DELUXE

A-- Prepare router for flashing
-------------------------------

1. Turn on a plug laptop into LAN port.
2. Browse to 192.168.1.1 (admin/admin)
3. Follow basic steps to configure router (i.e. setup wan, wlan etc.)


B-- Flash the router
--------------------
(see http://wiki.openwrt.org/OpenWrt/Docs/Hardware/Asus/WL500GD)

1. Download latest whiterussian image e.g. openwrt-brcm-2.4-squashfs.trx
2. Make sure plugged in by LAN
3. Set router to FAILSAFE mode by removing power, press hold reset whilst
returing power, when power led starts flashing slowly, release reset.
4. Check you can ping router on 192.168.1.1
5. enter the following:
  tftp 192.168.1.1
  tftp>binary
  tftp>trace
  tftp>put openwrt-b...
6. Wait for it to reboot (wait for AIR light to come on)


C-- Connect to router
---------------------

1. telnet 192.168.1.1
2. Set the the password (lithium) -- this disables telnet
3. logout and ssh in


D-- Get dnsmasq working
-----------------------
1. If dhcp is not working, log into the machine however you can
2. Check /etc/dnsmasq.conf
3. Check if it is running in a ps aux
4. run dnsmasq


E-- Copy & install
-------------------
1. Run site_deploy.sh <ip> 
2. Ssh to router, change to /tmp/hotspot, run ./site_install.sh