You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This device: https://www.zigbee2mqtt.io/devices/TYZGTH1CH-D1RF.html
appears very similar to the TS000F_TZ3218_7fiyo3kv for which klibro has written a custom quirk (https://github.com/klibro/zha-quirks/blob/e53ec83f044628f2f1eed239a0c0f7c4d7743056/TS000F_TZ3218_7fiyo3kv.py), and the signature is the same. However, the custom quirk does not enable the temp sensor. The temp output is stated as an unsupported attribute:
"0xe000": {
"endpoint_attribute": "tuya_manufacturer_specific_57344",
"attributes": {},
"unsupported_attributes": {}
},
"0xe001": {
"endpoint_attribute": "tuya_external_switch_type",
"attributes": {},
"unsupported_attributes": {}
},
"0xef00": {
"endpoint_attribute": "tuya_manufacturer",
"attributes": {},
"unsupported_attributes": {}
},
"0x0402": {
"endpoint_attribute": "temperature",
"attributes": {
"0x0000": {
"attribute_name": "measured_value",
"value": 2380
}
},
"unsupported_attributes": {
"0x0000": {
"attribute_name": "measured_value"
}
Solution description
Not sure if this device is subtly different in some way, so needs a tweak of the quirk but not sure where to start as I can't find any differences.
Problem description
This device:
https://www.zigbee2mqtt.io/devices/TYZGTH1CH-D1RF.html
appears very similar to the TS000F_TZ3218_7fiyo3kv for which klibro has written a custom quirk (https://github.com/klibro/zha-quirks/blob/e53ec83f044628f2f1eed239a0c0f7c4d7743056/TS000F_TZ3218_7fiyo3kv.py), and the signature is the same. However, the custom quirk does not enable the temp sensor. The temp output is stated as an unsupported attribute:
"0xe000": {
"endpoint_attribute": "tuya_manufacturer_specific_57344",
"attributes": {},
"unsupported_attributes": {}
},
"0xe001": {
"endpoint_attribute": "tuya_external_switch_type",
"attributes": {},
"unsupported_attributes": {}
},
"0xef00": {
"endpoint_attribute": "tuya_manufacturer",
"attributes": {},
"unsupported_attributes": {}
},
"0x0402": {
"endpoint_attribute": "temperature",
"attributes": {
"0x0000": {
"attribute_name": "measured_value",
"value": 2380
}
},
"unsupported_attributes": {
"0x0000": {
"attribute_name": "measured_value"
}
Solution description
Not sure if this device is subtly different in some way, so needs a tweak of the quirk but not sure where to start as I can't find any differences.
Screenshots/Video
Screenshots/Video
[Paste/upload your media here]
Device signature
Device signature
Diagnostic information
Diagnostic information
Logs
Logs
Custom quirk
Custom quirk
Additional information
No response
The text was updated successfully, but these errors were encountered: