You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
It works as a shade and has UP/DOWN/STOP commands.
But the device is not really a shade. Its an RF remote for the shade and I need help to figure out two things
I need to make the cover entity send the zigbee command => RF command multiple times, just so it works reliably. When I run the shades off a trained broadlink I used to send it 5 times, so I need to do something similar. The cover entity assumes UP has worked and stops you sending another UP. So where do I look in the source to find where the quirk binds into the cover entity?
I need to work out the zigbee command to send the bridge that will let it pair to the manual RF remote mounted near the shade. I think this will allow HA to see that the shade was closed manually. If you have the Tuya hub and Phone app you put it into RF pairing mode and then hit the RF remote's UP button to pair.
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
I am trying to integrate this Zigbee RF bridge into zha
https://www.zemismart.com/products/zmam02
It reports as
"manufacturer": "_TZE200_iossyxra",
"model": "TS0601",
I have been able to write a simple quirk to recognize this as a cover, its basically the same as this PR, but for my model number
https://github.com/zigpy/zha-device-handlers/pull/1102/files
It works as a shade and has UP/DOWN/STOP commands.
But the device is not really a shade. Its an RF remote for the shade and I need help to figure out two things
I need to make the cover entity send the zigbee command => RF command multiple times, just so it works reliably. When I run the shades off a trained broadlink I used to send it 5 times, so I need to do something similar. The cover entity assumes UP has worked and stops you sending another UP. So where do I look in the source to find where the quirk binds into the cover entity?
I need to work out the zigbee command to send the bridge that will let it pair to the manual RF remote mounted near the shade. I think this will allow HA to see that the shade was closed manually. If you have the Tuya hub and Phone app you put it into RF pairing mode and then hit the RF remote's UP button to pair.
I also have a little discussion on HA forum, https://community.home-assistant.io/t/need-help-commanding-zemismart-zigbee-to-rf-bridge/381574
Any pointers would be helpful.
Thanks
BTW, Here is the device signature
Beta Was this translation helpful? Give feedback.
All reactions