Add layout offset while keeping centered V-Cut line

[FractalEngineer]

Prerequisites

• I have read the documentation and the proposed feature is not implemented.

Description

Most manufacturers have different clearances for copper to milled and v-cut edge; for instance 0.2 and 0.4mm

I was looking to simply add 0.4mm offset in the layout to pass the V-cut requirement, but this appears to draw 2 lines, at the original board edge

Would it be possible to implement something as such?

I know there is already a clearance option reducing the copper to edge, I would like to go the other way and increase the board size to keep the copper areas as is

Thanks!

[FractalEngineer]

Here's the expected result on the vertical cuts by manually deleting one set of v-cuts and moving the remaining one back to center

Also noticing the offset didn't apply to the rail; I've added some vspace and will be offsetting the cut manually as well

Such setting could be called "copper to vcut clearance" in the v-cut settings

[FractalEngineer]

Here is what the desired output would look like; single, centered v-cuts with 0.4mm offset between every V-cut line and copper area