Skip to content

Latest commit

 

History

History
618 lines (542 loc) · 34.1 KB

CHANGELOG.md

File metadata and controls

618 lines (542 loc) · 34.1 KB
Raw

Changelog

7.3.0 (2021-04-29)

Features

  • Added a driver option to specify a user-defined directory to prioritize loading device config files from. This can be used to simplify testing and developing new configs.
  • When a value is updated either by polling or through unsolicited updates, pending verification polls are canceled now. This reduces traffic for nodes that report status changes on their own.
  • Experimental support for updating the embedded configuration files on demand
  • Support firmware updates with *.hec files
  • Added a method to get all association groups of a node and its endpoints
  • Associations can now also be managed on the endpoints of a node. Several method signatures were revised and the old versions are deprecated now. See PR #2287 for details.

Bugfixes

  • Basic CC values are now correctly persisted when requested using the Basic CC API. This also avoids incorrectly detecting devices as not supporting the Basic CC.
  • ObjectKeyMap and ReadonlyObjectKeyMap are now iterable
  • The controller can no longer be re-interviewed with refreshInfo
  • Handle error when logging a Notification CC Report before the config is loaded
  • Consider custom transports to determine loglevel visibility

Config file changes

  • Add forceNotificationIdleReset compat flag to Aeotec MultiSensor Gen5
  • Add load sense to Evolve LDM-15W
  • corrected style in Nortek PD300Z-2
  • Remove Group 2 Lifeline attribute for Aeotec ZW098
  • Minor improvements to zen32 configuration
  • Widen firmware range for Popp Solar Siren 2
  • Add compat flag to GE zw3008 to re-enable basic command events to replicate central scene functionality
  • Add new configuration for PIR-200 Motion Sensor
  • MCOHome configuration changes
  • Correct LZW31-SN dimming and ramp labels
  • Update Aeotec ZW095 config
  • Correct Linear wd500z
  • Correct Nortek wd500z
  • Correct alarm mapping for Yale YRD210
  • Add compat flag to LZW36
  • Add RU product ID to Wintop 82 iDoorSensor
  • Force auto-idling for ZG8101 notifications
  • Override reported Multilevel Switch version for MH-C421
  • Template Logic Group configuration files
  • Add compat flag to remove supervision from homeseer HS-WD100+
  • Correct manufacturer name for MP20Z
  • Add namron 4 channel and fix 1+2 channel switch
  • Fix ZW117 group label
  • Add enableBasicSetMapping compat flag to SM103
  • Add Fibaro outlet FWPG-121 (UK version)
  • Map Basic Set to Binary Sensor Reports for Fibaro FGK101
  • Add battery low mapping to Kwikset locks
  • Make invert switch parameter writable on Nortek WD500Z-1, Linear WD500Z-1 and Evolve LRM-AS

Changes under the hood

  • Update several dependencies
  • The Github Bot can now import device files from the Z-Wave Alliance Website

7.2.4 (2021-04-16)

Bugfixes

  • Adding associations to the controller with arbitrary target endpoints is no longer an error
  • Add node requrests for a node with ID 255 are no longer handled
  • When reacting to locally reset node, don't try to mark it as failed twice
  • Do not override internal log transports with configured ones

Config file changes

  • Update Remotec ZXT-600 config
  • Add NIE Tech / Eva Logik ZW97
  • Make parameter #5 firmware dependent for Zooz ZSE40
  • Enable Basic Set Mapping for ZP3102
  • Cleanup and template Aeotec configurations (part 2)
  • Add Zooz ZSE11
  • Preserve Basic CC for Popp rain sensor
  • Update Radio Thermostat CT101 config
  • Device configuration files may now contain wakeup instructions
  • Add Qubino Smart Leak Protector
  • Fix incorrect selective reporting labels for aeon home energy meters
  • Correct Evolve LRM-AS
  • Add parameter 32 to GE/Jasco 46203

7.2.3 (2021-04-13)

Bugfixes

  • The nodeFilter logging option is now correctly applied to value change logs
  • Fixed an issue where unsuccessful SendData[Multicast]Bridge requests would not cause the transaction to be rejected. This caused removeFailedNode and replaceFailedNode commands to not work on sticks supporting the Bridge Controller API
  • Existence of endpoints is now based on the known endpoint indizes instead of just the total count
  • Non-root endpoints may no longer support Multi Channel CC, even if their device class indicates so
  • The Multi Channel CC interview is now skipped for non-root endpoints

Config file changes

  • Add Haseman RS-10PM2
  • Improve config for Remotec zxt-310
  • Correct report type label for Aeotec devices
  • Synchronize Philio PAN04 configuration with manual

Changes under the hood

  • When rate-limited, the statistics reporter now tries again after the time indicated by the statistics backend

7.2.2 (2021-04-11)

Bugfixes

  • Block subsequent destroy() calls instead of returning immediately. This should avoid cache corruption when the zwavejs2mqtt Docker container shuts down.
  • Fix error: Cannot translate a value ID for the non-implemented CC _NONE

Config file changes

  • Enable Basic Set mapping for FGBS001
  • Add options to device status after power failure for hank switch
  • Add checks for duplicated option values and eliminate them
  • Correct min value for Aeotec "Motion Sensor Timeout" options

7.2.1 (2021-04-10)

Features

  • Added methods to manage SUC return routes and automatically promote the controller to SUC/SIS if possible and necessary

Bugfixes

  • Restored the pre-7.1.x behavior of mapping reports from the root device to the first supporting endpoint
  • Thermostat Fan Mode API now uses the correct CC for its commands
  • Treat transaction failures due to a removed node as recoverable
  • Make sure each node has a return route to the SUC

Config file changes

  • Map alarmLevel to userId for Yale locks
  • Map Basic CC::Set to Binary Sensor for WADWAZ-1 and WAPIRZ-1
  • Add additional product ID to Fibaro FGS-224
  • Add compat flag preserveRootApplicationCCValueIDs to ZEN16, 17, 25
  • Update FGRGBW-442 config

7.1.1 (2021-04-06)

Changes under the hood

  • Usage statistics now use a random 32 byte value to salt the HomeID hash

7.1.0 (2021-04-05)

Features

  • Added the driver option disableOptimisticValueUpdate to opt-out from optimistic currentValue update
  • More lock/unlock events are now mapped to the (Door) Lock CC status
  • Implemented the Bridge API versions of SendData[Multicast] commands and prefer them over the Static API variants if supported
  • Added the node events interview started and interview stage completed to monitor progress of node interviews.
  • Implemented opt-in telemetry for usage statistics. Dear developers, please strongly consider enabling this feature to help us focus our efforts. Details can be found here and here.
  • Added the device compat option enableBasicSetMapping to opt-in to mapping Basic CC::Set commands to other CCs

Bugfixes

  • Add missing exports for Message class
  • Minimize automatic interaction with manual wakeup nodes, which might not be awake long
  • Shut down gracefully if the serial port is suddenly not open
  • Handle CC_NotSupported and other "freak" errors during node bootstrapping
  • Avoid pinging between ProtocolInfo and NodeInfo interview stages if the node status is known
  • Fixed an issue that caused the Multilevel Sensor CC interview to do nothing if V5 is supported by the node
  • Fixed a crash: supportedCCs is not iterable. Added a workaround for crashes caused by the previous fix.
  • Notification variables are no longer automatically set to idle after 5 minutes. If a device does not send idle notifications, the compat flag forceNotificationIdleReset must now be enabled in the configuration files.
  • ConfigurationMetadata is now part of the ValueMetadata union type.
  • Changes to the loglevel now work correctly on the fly

Config file changes

  • Removed compat flag preserveRootApplicationCCValueIDs from Zooz Zen16/17 again
  • Fixed typo in Zen32 configuration

7.0.1 (2021-03-27)

Bugfixes

  • Abort interview attempt when endpoint query times out
  • Don't log TODO when receiving SceneActivationCC::Set commands
  • Don't map BasicCC::Set to other CCs
  • Don't map reports from the root device to endpoint if it is ambiguous, allow opt-in with compat flag (reverted in 7.2.0)
  • Add space between number and unit when logging durations
  • Treat controller timeout as an expected error in more locations instead of throwing

Config file changes

  • Add compat flag to zen17 and zen16; fix zen17 config
  • Cleanup and template Aeotec configurations (part 1)
  • Update Inovelli LZW60 device to better match upstream documentation
  • Add Namron 200W LED dimmer
  • Add alarm value mapping for Kwikset 888
  • Remove Supervision CC from Inovelli LZW36 due to firmware bug

Changes under the hood

  • Collect telemetry information for identified devices without a config file

7.0.0 (2021-03-23) · Summer is coming!

Breaking changes · Migration guide

  • Renamed controller.removeNodeFromAllAssocations to controller.removeNodeFromAllAssociations to fix a typo
  • We've reworked/fixed the parsing of Node Information Frames (NIF) to match the specifications and changed node properties to make more sense
  • Nodes with a completed interview are no longer queried for all their values when restarting
  • The deltaTime and previousValue values for the Meter CC are no longer exposed
  • Numeric loglevels are converted to the corresponding string loglevel internally. driver.getLogConfig always returns the string loglevel regardless.
  • The "notification" event was decoupled from the Notification CC and now serves as a generic event for CC-specific notifications.

Features

  • The logger formats were more cleanly separated between logger and transport instances. As a result, writing user-defined transports is now much easier.
  • Implemented a logfmt transport in https://github.com/zwave-js/log-transports
  • Added support for Entry Control CC. It has been found that some entry control devices don't follow some of the strict rules regarding the data format. The validation can be turned off with the compat option disableStrictEntryControlDataValidation.
  • Implemented an API to re-interview a single CC on a node and its endpoints without repeating the entire node interview
  • The stack of ZWaveErrors related to transmission errors now contain the call stack where the message was created instead of the internal state machine's stack
  • Added a compat option alarmMapping to map unstandardized V1 alarm values to standardized V2 notification events
  • Use the new compat option alarmMapping in Kwikset and Yale locks
  • Moved the deviceClass property from ZWaveNode to its base class Endpoint and consider the endpoint's device class where necessary

Bugfixes

  • Changes to the logger configuration are now correctly applied dynamically
  • Changed how an error gets identified as a ZWaveError to avoid problems with duplicated dependencies
  • Writeonly parameters are no longer queried even if Configuration CC has version 3 or higher
  • Fall back to slow refresh behavior on Central Scene CC V2 if a delayed key up is detected
  • Handle incorrectly zero-terminated strings in name reports of Association Group Info CC
  • Allow healing single nodes
  • Manually requesting a re-interview while another one is still in progress no longer causes multiple interviews to happen in parallel

Config file changes

  • Add missing Sunricher device configs
  • Mark Alarm Sensor as not supported on FGBS001
  • Add Fakro ZWS230 chain actuator
  • Add RU version of ZW100 (FW 1.10)
  • Distinguish Popp Flow Stop valve versions 1 and 2
  • Add undocumented parameter 6 to ZW3104
  • Minor update for some Inovelli switches and dimmers

Changes under the hood

  • Added a missing callback function to the quick start example
  • Added an API to ConfigManager to look up device configurations without evaluating the conditionals

6.6.3 (2021-03-16)

Bugfixes

  • Avoid crash during bootstrapping when Version CC is not in the NIF

Config file changes

  • Split LZW31-sn param 16 and normalize param names
  • Separate Neo CoolCam NAS-WR01ZE V2 from WR01Z

6.6.2 (2021-03-14)

Bugfixes

  • While replacing a node with replaceFailedNode the node does not get removed from associations anymore. This could prevent secure inclusion from succeeding.
  • Notification variables are now auto-idled after 5 minutes as it was intended, not after 5 hours.
  • Fixed a typo in the logging for Association CC

Config file changes

  • Added Leviton 4 Speed Fan Controller zw4sf
  • Added russian versions of several Shenzhen Neo devices
  • Update Qubino Smart Plug 16A, parameter 41 does not exist
  • Update LZW30 parameters to match documentation/latest firmware
  • Change misidentified device sm103 to hsp02
  • Remove unsupported double tap on GE 26932; add double tap to 12730; fix parameters
  • The config file for 700-series controllers released with the base chip from Silabs is * now more generic
  • Add param 52 to Gocontrol GC-TBZ48
  • Add config for Haseman R4D4
  • Add config for YRD210 versions with an incorrect manufacturer ID
  • Improve Leviton dzpd3 parameter metadata and add device metadata
  • Add Ring Keypad config
  • Add config params 13 and 51 to Inovelli LZW30-SN

Changes under the hood

  • We've reworked the docs on device configuration files, including a style guide.
  • Fixed a typo that prevented the nightly configuration releases

6.6.1 (2021-03-07)

Bugfixes

  • After a restart, sleeping nodes have their status correctly determined even if they weren't interviewed completely before
  • During inclusion, sleeping nodes are no longer marked as asleep after the protocol info was queried
  • Fixed the length validation in sequenced Security S0 Message Encapsulation commands
  • Unsolicited reports from the root endpoint are now also mapped to higher endpoints when the node supports Multi Channel Association V3+
  • Fixed a crash: supportedCCs is not iterable. If this happens to you, re-interview affected devices.

Config file changes

  • Added config for Ring Range Extender
  • Updatde yrd156 inclusion, exclusion, reset instructions
  • Remove Supervision support for GE 14287 / ZW4002
  • Values for the root endpoint values of ZW132 are no longer hidden
  • Cleanup Ring Contact Sensor and Motion Sensor
  • Correct DMS01 configuration file
  • Add Zooz ZSE29 configuration parameters
  • Added lots of lightly reviewed config files from ZWA import
  • Removed invalid params 1 and 2 from Fibaro FGRM222

6.6.0 (2021-03-02)

Features

  • Added the "buffer" metadata type to distinguish binary user codes from string user codes

Bugfixes

  • The heal node callback timeout depend on the network size and node types
  • In configuration metadata, states is now also present when allowManualEntry is true

Config file changes

  • Minor corrections to Homeseer devices
  • Add additional product ID to Fibaro Roller Shutter 3

Changes under the hood

  • Lots of dependency updates
  • Refactored config files for Yale locks to use templates

6.5.1 (2021-02-26)

Bugfixes

  • When updating color components from hexColor, the value events are now emitted
  • Alarm V1 values are only created if supported
  • Fixed the detection of the notification mode of a mode instead of always skipping it

Config file changes

  • Update HeatIt Z-Smoke associations and metadata
  • Force Multi Channel CC to be supported for MH-C421
  • Add Double Tap to several GE switches
  • Add ABUS SHHA10000 configuration
  • Add Zooz ZEN17 and ZEN32

Changes under the hood

  • Several config files were refactored to use templates
  • Add method to load fulltext device index
  • Releases now pin the external dependencies to exact versions
  • defaultValue in config params is now only required if the param is writable

6.5.0 (2021-02-23)

Features

  • Implemented Scene Actuator Configuration CC
  • Updated Scene Controller Configuration CC API to match Scene Actuator Configuration CC
  • Values that could previously be "unknown" now default to undefined instead. If the distinction is relevant, the previous behavior can be restored using the driver option preserveUnknownValues.
  • Added values to Color Switch CC to set multiple color components at once (#1782)
  • Added the option nodeFilter to the logger configuration to limit logging to specific nodes

Bugfixes

  • Generating the config index no longer fails in production when single files have errors
  • Fixed a crash that could happen while logging a message while the driver is not ready yet
  • Fixed a crash that could happen while trying to bootstrap a device that does not respond after inclusion
  • The state value in Thermostat Fan Mode CC is now readonly
  • Firmware updates now disable the delayed activation feature by default
  • When updating a different firmware target than 0, the correct firmware ID is now used
  • The Fibaro CC now correctly understands unknown values.
  • Value IDs for some controlled CCs are now also exposed through getDefinedValueIDs
  • Do not map root endpoint values to all endpoints when multiple endpoints support the value
  • The device index is now preserved in memory if it cannot be written to disk
  • The unit of configuration parameters is now actually read from device configuration files
  • The list of supported and controlled CCs of a node is no longer overwritten when a device sends a NIF on manual activation
  • Add toLogEntry method to Scene Actuator Configuration CC::Set command

Config file changes

  • Added an additional Inovelli NZW31T model
  • Use Node Associations for ZW132 Lifeline
  • Added missing zero to LZW45 partial param 23 mask
  • Correct heatit brand names
  • Add Association Groups to Kwikset locks
  • Fixed an incorrect device ID assignment of Kwikset 914/c
  • Remove duplicate parameters from GED2350
  • Add Zooz zen72, update zen71 description
  • Small wording changes to flush technisat devices

Changes under the hood

  • The config files for Kwikset locks were refactored to use templates
  • Configuration files may now include conditional sections
  • A bunch of documentation updates: CC documentation, ConfigManager, API overview
  • Clarified device file requirements
  • Cleaned up the maintenance scripts that were spread out through the repo
  • Issues with incomplete templates now get auto-staled quickly

6.4.0 (2021-02-16)

Features

  • Implemented Scene Controller Configuration CC
  • Added the ability to to get the current logging configuration

Bugfixes

  • Fixed an issue where sleeping nodes could block the send queue when it is not yet known whether they support Wake Up CC

Config file changes

  • Update configuration for Zooz Zen21, Zen22, Zen26 and Zen27
  • Include LZW31 firmware 1.48 in config
  • Added another Eaton outlet to the config

6.3.0 (2021-02-14)

Features

  • Add missing specific device classes and expose Z-Wave+ Device Types through the SpecificDeviceClass class
  • Device metadata like inclusion instructions are now exposed through the DeviceConfig class
  • Added support for .bin firmware files
  • Added the ability to compose config files by importing templates
  • Add compat option manualValueRefreshDelayMs to delay the automatic refresh of legacy devices when a NIF is received
  • Implemented Thermostat Fan Mode CC
  • Implemented Thermostat Fan State CC
  • The "notification" event no longer includes a CC instance as event parameters. CC instances are first converted to a plain JS object now.
  • Added the updateLogConfig method to Driver to update logging configuration on the fly.

Bugfixes

  • It is no longer assumed that a node is included securely when it responds to a nonce request
  • .hex firmware update files with sparse data are now parsed correctly
  • Aeotec firmware updates with spaces in the firmware name are now accepted
  • Avoid infinite loops when scanning V3+ config params when the device does not use param number 0 to indicate the end of the list
  • Guard handleClockReport against crashing because of no support
  • Sleeping nodes are now immediately marked as ready when restarting from cache
  • Fixed a crash that could happen during Z-Wave+ bootstrapping
  • Fixed a crash that could happen when parsing a Node Naming And Location CC with a malformed UTF16 string
  • Unsolicited reports are no longer mapped from the root endpoint to endpoint 1 if that endpoint does not support the CC

Config file changes

  • add Inovelli NZW30T manufactured by NIE Technology
  • correct device names UFairy ZSE01/ZSE02
  • improve Kwikset support
  • improve Yale Lock support
  • improved zen22 support
  • force Binary Switch support for Qubino ZMNHDA
  • Imported several config files from the Z-Wave Alliance
  • Add compat flag treatBasicSetAsEvent to linear wt00z-1
  • Add Yale NTM625 sectional mortise lock configuration
  • Use compat option manualValueRefreshDelayMs for Leviton DZMX1
  • Move product Type/Id from CT100 to CT101
  • Add/update MCOHome config files for v5 devices
  • Fix latest firmware config for Zooz ZEN30
  • Add support for TechniSat On/Off switch flush mount, BJ
  • Add Technisat shutter-switch
  • Add LED always on to GE 46201
  • Removed descriptions from configuration options that are very similar to the labels
  • Add support for Inovelli LZW45
  • Add a config file for Homeseer HSM200
  • Update parameters for Inovelli LZW31-SN and LZW31-BSD

6.2.0 (2021-02-09)

Features

  • Added support for Barrier Operator CC
  • Notification CC Reports with a lock/unlock event are now mapped to Lock CC and Door Lock CC states.

Bugfixes

  • User Code CC V1 reports with a user code that contains only ASCII and newline characters now ignore the newlines
  • Notification CC Reports with invalid event parameters are no longer dropped completely
  • Added a workaround for Notification CC Reports with embedded User Code CC Reports that don't include the user code
  • Added another fallback for Aeotec firmware extraction

Config file changes

  • Force Binary Switch support for TKB Home TZ69
  • Add links to device manuals
  • Swap product type and id for Zooz ZEN30
  • Add support for Yale YRM276 lock
  • Reverted the removal of double tap support from some early GE devices
  • Change manufacturer and improve labels for nzw31s and nzw30s
  • Improve Zooz ZEN23 and ZEN24 toggle switch configs
  • Add ABUS SHRM10000
  • Add alternative device id for Heatit Z-Smoke 230V
  • Add support for HomeSeer HS-FLS100-G2

Changes under the hood

  • Throw better error when parsing a config file fails

6.1.3 (2021-02-05)

Bugfixes

  • The config lint step now correctly fails when a device file cannot be parsed
  • If preserveRootApplicationCCValueIDs is set, reports are no longer mapped from the root endpoint to endpoint 1.

Config file changes

  • Add support for Zooz ZEN30
  • Add additional product type and id number for Shenzen Neo PD03Z
  • Add support for Linear/Nortek/GoControl WT00Z5-1
  • Add support for Zooz ZEN71
  • Add support for AU/NZ variant of Aeotec ZW111
  • Add support for MP21Z
  • import device configs from Z-Wave Alliance (Part 6: misc devices)
  • fix: change LZW31 indicator color value size to 2
  • Param descriptions are now auto-checked for unnecessary stuff

Changes under the hood

  • The Z-Wave specifications were moved out of this repo

6.1.2 (2021-02-03)

Bugfixes

  • The driver now checks the listening flags of a node to determine whether a node can sleep instead of the Wake Up CC
  • The test whether a node is included securely was refactored to incorporate the timeout changes from v6.1.1. In addition, we now assume that a node is secure when it sends or requests nonces.
  • Configured association labels are now preferred over the ones reported by nodes
  • Non-listening nodes are now assumed to be asleep on startup and the initial ping no longer happens.
  • currentValue is now only overwritten with targetValue if that is a valid value
  • V1 Alarm frames are now treated as a normal report with two values

Config file changes

  • Force Wake Up as supported for Aeon Labs Minimote
  • Correct typos in Zooz Zen16 option choices
  • Remove double tap support from small number of early GE devices
  • Add additional config parameters to Zooz Zen26 and Zen27 and update Zen76/77 parameter language

Changes under the hood

  • Added a check for config parameter descriptions that are too similar to the label, documented best practices in this regard
  • Leading zeroes in firmware versions are now disallowed

6.1.1 (2021-01-31)

Bugfixes

  • Scene Activation CC scene IDs are no longer auto-reset to undefined. This is unnecessary since they are value events
  • All get-type commands may now timeout and return undefined without throwing
  • Value labels for the Meter CC were improved to be unique
  • UserCodeReport with status NotAvailable are now parsed correctly
  • The interview procedure after inclusion now correctly implements the Z-Wave+ Role Type Specs, resolving weird issues with some secure devices
  • currentValue and similar values are now updated immediately when a set-type command succeeds. Verification is done after a short delay.

Config file changes

  • Added several config files for new Honeywell/GE devices
  • Added several config files for remaining GE devices, misc deadbolts
  • Added Innovelli LZW42
  • Added EcoDim dimmers
  • Added Zooz Zen16
  • Added a compatibility flag to remove support of CCs from devices
  • Added Philio PAT02-A Flood Sensor
  • Removed the (now invalid) compat flag keepS0NonceUntilNext
  • Disable Supervision CC report for HomeSeer WD200+
  • Force Basic CC to be supported for Vision Security ZD2102-5 to work around unreliable Notification Reports

Changes under the hood

  • The frame type and RSSI of incoming commands are now logged if applicable

6.1.0 (2021-01-26)

Features

  • Added a pollValue method to ZWaveNode to perform get request for a specific ValueID

Bugfixes

  • Massively improved the ValueDB performance (about 500x speedup) for medium to large networks

Config file changes

  • Updated and cleaned up many device configuration files with imports from the Z-Wave Alliance website
  • Added config files for Zooz ZEN34, ZEN76, and ZEN77
  • Fix: swap ZW080 bitmasks for siren volume and siren sound

6.0.2 (2021-01-24)

Bugfixes

  • After setting the hexColor of Color Switch CC, the individual color components are no longer polled by one
  • Increased the verification poll delay after a set command to avoid capturing intermediate and outdated values
  • NonceReports no longer get stuck in the wakeup queue if a sleeping device does not acknowledge the receipt after requesting one

Config file changes

  • Imported all missing manufacturer names from the Z-Wave Alliance website
  • Imported several hundred device configuration files from the Z-Wave Alliance website

6.0.1 (2021-01-21)

Bugfixes

  • The stateId property of Scene Activation CC is now stateless
  • The controller methods to replace or remove a failed node now ping the node beforehand, to ensure the node is in the failed nodes list
  • Fixed a logging issue for Multi Channel Associations
  • removeAssociations no longer throws an error when trying to remove only multi channel associations
  • When a security-encapsulated message is dropped, the log now contains a reason
  • Fixed two sources of unhandled Promise rejections
  • When the compat flag treatBasicSetAsEvent is enabled, the Basic CC values are no longer hidden
  • Root device value events for devices with the preserveRootApplicationCCValueIDs are no longer filtered out

Config file changes

  • Added support for Aeotec aerQ ZWA009-A US/Canada/Mexico version
  • Fixed invalid parameter options in many config files
  • Parameter options with incompatible values are now detected as an error

6.0.0 (2021-01-19) · This is the way

Breaking changes · Migration guide

  • Logging can now be configured through driver options. However, the environment variables for logging are no longer evaluated lazily, so they now need to be set before requiring zwave-js.
  • The second (string) parameter of the "interview failed" event handler was removed
  • The type ValueMetadataBase has been renamed to ValueMetadataAny. The old type ValueMetadataAny was merged into ValueMetadataBase.
  • The retry strategy for sending commands to nodes has been revised. By default, a message is no longer re-transmitted when the node has acknowledged its receipt, since it is unlikely that the retransmission will change anything. The old behavior can be restored by setting the attempts.retryAfterTransmitReport driver option to true.
    To compensate for the change and give the response enough time to reach the controller, the default for timeouts.response has been increased from 1600 to 10000.
  • The driver now distinguishes between stateful and event values. The latter are now exclusively exposed through the "value notification" event.
  • The deprecated nodeInterviewAttempts option was removed
  • The options fs and cacheDir have been renamed to storage.driver and storage.cacheDir.
  • Loggers are now managed on a per-driver basis. This means you can use zwave-js to talk to different controllers and have separate logs for each.
  • The lookupXYZ methods are no longer exposed by @zwave-js/config. Use the configManager property of your driver instance instead.

Config file changes

  • The index file was removed from the repo and is now generated on demand
  • Several improvements for GE dimmers and switches
  • Added missing config parameters to IDLock 150
  • Added Innovelli LZW36 and First Alert ZCOMBO-G
  • Added Technisat Dimmer and series switch
  • Added Lifeline association to Danfoss MT 2649
  • Added product id/type to NAS-WR01ZE
  • Added Inovelli LZW31 Black Series Dimmer
  • Added Aeotec ZW187 Recessed Door Sensor 7
  • Added checks for partial parameters
  • Added Aeotec ZWA009 aerQ Temperature and Humidity Sensor
  • Added Honeywell 39348/ZW4008
  • Added Zooz zst10-700 z-wave usb stick
  • Added Fibaro Smart Switch FGS-214 and FGS-224
  • Added Fortrezz fts05p
  • Added an additional product type to Aeotec Range Extender 7
  • Added iblinds V3
  • Added Zooz ZEN31 RGBW Dimmer
  • Added ThermoFloor Z-Temp2 thermostat
  • Change manufacturer Jasco Products to GE/Jasco
  • Changed ZDB5100 config to expand on parameter 1
  • Changed several ZW175 config parameters to use partial parameters
  • Improved configuration file for Fibaro FGS223
  • Renamed config param #11 in Q-Light Puck
  • Removed an unsupported parameter from GE 14294
  • Root endpoint values are no longer hidden for Philip PAN06, Aeotec ZW095 energy meter
  • New versions of @zwave-js/config are now automatically released every night if only config files were changed since the last release.
    You can run npm update @zwave-js/config in the zwave-js install dir to pull the latest config files. For now, a driver restart is required afterwards.

Features

  • Added basic support for 700-series controllers
  • Added a compatibility option to disable the Basic CC mapping
  • Added a compatibility option to treat Basic CC::Set commands as events instead of Reports
  • Added a compatibility option skipConfigurationInfoQuery to work around a firmware issue in Heat-It Z-TRM2fx
  • Added the compatibility option overrideFloatEncoding for devices that only understand a specific float encoding (Z-TRM3 and AC301)
  • A driver option was added to enable logging to the console, even if it is not a TTY
  • A driver option was added to control the filesystem access throttling
  • Improved the label for Level low property in BatteryCC
  • Unimplemented CCs may now be sent
  • The version of zwave-js is now exported as libVersion from the main entry point
  • Implemented Battery CC V3
  • Added support for Hail CC
  • ValueIDs that use a Duration instance as the value now have the metadata type "duration"
  • Added a workaround for devices that return an invalid response when finding the first configuration param
  • Added a hexColor property to the Color Switch CC
  • Added the properties ready and allNodesReady to the driver to read the status after the corresponding events were emitted
  • The node neighbor lists now get updated when a node is removed
  • The refreshValues method is now exposed on node instances, which allows polling all actuator and sensor values of a node. Note: Please read the warnings in the documentation!
  • The controller event callback types are now exported

Bugfixes

  • Fixed an off-by-one error in the Binary Sensor Supported Report bitmask.
    Note: If your devices are affected by this bug, re-interview them to remove corrupted values.
  • Expire nonces for keepS0NonceUntilNext devices until after the next nonce was received by the device
  • The interview is no longer aborted when a device does not respond to the Wakeup Capability query
  • Fixed a crash that could happen when compressing the value DB with an existing backup file.
  • Fixed a wrong value ID for Multilevel Switch CC targetValue
  • The driver no longer assumes that a sleeping node falls asleep after a certain time
  • The name and location of a node is no longer deleted when the node gets re-interviewed and does not support Node Naming And Location CC
  • The propertyKeyName of Meter CC values now contains the Meter type name
  • Configuration CC: empty Name and Info are now accepted as valid commands
  • stopInclusion/stopExclusion now always return a boolean
  • Successful pings now correctly change the node status
  • Messages from previous interview attempts are now dropped when an interview is restarted
  • When requesting node info fails, the interview is now aborted and restarted later instead of skipping all CC interviews
  • Added two missing "specific device types"
  • Switched the basic device type for Routing Slave and Static Controller
  • If a device sends multiple NonceGet requests in a row, the duplicate requests are now ignored instead of aborting the previous transaction

Changes under the hood

  • Test releases for PRs can now be created with a command
  • PRs titles are now enforced to comply with conventional commits
  • Config json files are now automatically formatted in VSCode and linted
  • While editing device config files, supporting IDEs can now use a JSON schema to help you
  • We've added @zwave-js-bot to help us manage the repo and to help you contribute

Older changelog entries