Skip to content

Latest commit

 

History

History
506 lines (365 loc) · 17.5 KB

README.md

File metadata and controls

506 lines (365 loc) · 17.5 KB
Raw

Dist-Detect

Guess Who Tux

Dist-Detect is an active commandline scanner to detect the Linux or Unix distribution running on a remote host by looking at the banners or responses of typical Unix network services.

Dist-Detect is currently work in progress. For now only the SSH service is supported and works already quite well in detecting Debian and derivatives (Ubuntu, Raspbian, etc.), but HTTP/HTTPS, DNS (dig version.bind ch txt +short @<IP>) and SMTP might be a good data source as well.

Purpose

Quickly get an idea …

  • … of the Linux/BSD/Unix distribution and distribution release of a remote system …

  • … if the admin applies security updates regularily …

  • … if the remote system is running an EoL release …

… just by looking at the responses of a few common network services (or at Shodan.io), i.e. very fast.

This is especially useful in heterogenous networks (e.g. with BYOD or many self-managed machines) as common in academia, data-centers with a lot of internet-facing, rented servers/racks, etc.

Focus on Low Hanging Fruits

  • If the scanner finds something bad, it's quite sure → nearly no False Positives
  • Unknown or unclear versions stay unknown or unclear → will contain False Negatives

Example

SSH-2.0-OpenSSH_7.4p1 Debian-10+deb9u4

The 7.4p1 Debian as well as the deb9 clearly show that this is a Debian 9 Stretch. From the banner you can determine the according package version to be 1:7.4p1-10+deb9u4.

Now you can check against the version in the Debian 9 Stretch (security) repositories (e.g. in the Debian Package Tracker if it's the latest one (it's not as of this writing) and hence if OpenSSH security updates as provided by Debian have been applied.

This tools tries to automate this kind of analysis and is hence allowing to scan your whole network quickly for obviously outdated machines. I call this Low Hanging Fruits Scanning.

Work in Progress

As of now, this work in progress.

The inital prototype used hardcoded (and handcoded :-) regular expression (which were outdated quite quickly).

Currently the package repositories of Debian, Ubuntu and Raspbian are checked for the current OpenSSH versions and then the result is stored in an SQLite database. This database is then queried when translating OpenSSH banners into package versions and uptodateness information.

Especially the database schema will likely still change without migration path between each incarnation at the current stage of development. (But since the database can be easily regenerated, this should be no real issue.)

Includes (static) heuristics to also detect an endlessh tarpit.

There are scripts which scan hosts themselves (IPv4 as well as IPv6) and there's a script which queries Shodan.io's API. (The latter requires a free account there and an API key stored in ~/.shodan/api_key as the officialy Shodan Python library does.)

Requirements

TL;DR: apt install libclass-c3-perl libdpkg-perl libdpkg-parse-perl libfile-touch-perl libio-socket-inet6-perl libmojolicious-perl libmojo-sqlite-perl libnet-cidr-set-perl libnet-dns-perl libparams-validate-perl libtry-tiny-perl libyaml-perl libdata-validate-ip-perl

Dist-Detect is written in Perl (5.14 or a higher 5.x version) and requires the following non-core Perl modules (CPAN distributions and Debian packages names in parentheses):

¹) Only available since Debian 10 Buster.

Installation

None yet. Use it just from the checked out git repository by calling the scripts in bin/ with their relative or full path.

Usage

Run in the following order:

  1. bin/download-package-lists.pl to gather the relevant data. It's stored in the subdirectory package-lists. Expect at least 250 MB of downloaded data.

  2. bin/find-openssh-versions-in-package-lists.pl to extract the relevant information from the downloaded data. It's stored in the file db/pattern.db. This SQLite database will probably around 1 MB and will become bigger after time.

  3. bin/scanhost.pl 192.0.2.0/24 198.51.100.0/24 203.0.113.0/24 | bin/interpret-versions.pl to scan some IPs or IP ranges and evaluate the result with regards to applied updated or end-of-life operating systems. (Of course you can also do this in two steps and save the raw scan result in a file and later interpret its content.)

    Both tools output pipe separated values.

TODO

  • Consistent tags: NoSecUpd vs NO-UPD

  • Add package list downloaders and scrapers for CentOS, openSUSE and macOS.

  • Distinguish between repos where SSH signatures changes often (active security mirrors of Debian and derivatives) and where they change seldomly (old-releases.ubuntu.com / archive.debian.org).

  • Make output more human readable. Maybe use a commandline switch to produce either machine or human readable output. The human readable output could be still machine readable by e.g. using YAML instead of purely line-based formats.

  • Debian Jessie is at the moment available on the normal mirrors and in the historical archive and hence gets flagged EOL even if that might be wrong depending on the (not easily detectable) architecture. Handle this better.

Plans

Store most current OpenSSH release version in database

The bin/newest-openssh-version-on-*.pl scripts are a good start for that.

Consider Further Services

If e.g. the SSH banner was SSH-2.0-OpenSSH_7.4, this could be (at least) a RHEL 7.4 or higher, or a macOS 10.12.4 to 10.12.6. So other protocols should add more confidence or limit the list of possible operating systems and distributions.

HTTP / HTTPS

$ HEAD http://ssh-was-ambiguous/
200 OK
Connection: close
Date: […]
Server: Apache/2.4.6 (Red Hat Enterprise Linux)

Here, port 80 told us the distribution even though the SSH banner was ambiguous.

HEAD http://somecentos6/
200 OK
Date: […]
Server: Apache/2.2.15 (CentOS)

SMTP

$ echo QUIT | nc mymailserver 25
220 mymailserver ESMTP Postfix (Debian/GNU)
221 2.0.0 Bye
$ echo QUIT | nc afriendsmailserver 25
220-afriendsmailserver ESMTP Proxmox
221 2.0.0 Bye
$ echo QUIT | nc anothermailserver 25
220 anothermailserver ESMTP Exim 4.86_2 Ubuntu Thu, 10 Oct 2019 17:35:32 +0200
221 anothermailserver closing connection

We often don't get the version, but at least the Linux distribution. Again helpful if the SSH banner is ambiguous.

DNS

$ dig +short -t txt -c chaos version.bind @ams.sns-pb.isc.org
"9.9.7-P2"
$ dig +short version.bind CH TXT @a.iana-servers.net
"Knot DNS 2.6.3"
 dig +short version.bind CH TXT @ns.nlnetlabs.nl
"NSD 4.2.2"
$ dig +short version.bind CH TXT oneofmydnsservers
"9.9.5-9+deb8u18-Debian"
$ dig +short version.bind CH TXT somerhel7
"9.11.4-P2-RedHat-9.11.4-9.P2.el7"
$ dig +short version.bind CH TXT anotherrhel7
"9.9.4-RedHat-9.9.4-74.el7_6.2"
$ dig version.bind ch txt +short @127.0.0.1
"unbound 1.9.4"
$ dig version.bind ch txt +short @192.168.1.1
"dnsmasq-2.78"

Please note that fpdns is about as (un)suitable as nmap for this purpose (but much faster): It does real fingerprinting and not evaluating the actual data it can retrieve from a DNS server.

An exception would be cases like these:

$ dig +short version.bind CH TXT @8.8.8.8
$ dig +short version.bind CH TXT @a.ns.nic.cz
$ dig +short version.bind CH TXT @ns2.switch.ch
"contact [email protected]"
$ dig +short version.bind CH TXT @a.nic.de
"ns-1.de.nl1.bind"

Ideas

  • Also store results and scan dates in a database.

  • Map SSH implementations and releases to CVE-IDs.

  • Someone suggested to also look at SIP, NTP, MDNS (Synology devices seem to be quite chatty) and SSDP ports.

  • Parse package changelogs for existing versions.

  • Add optional scanning backends.

  • Ping (probably with fping or ZMap) before scan.

  • Integrate scanning via Tor.

    • Just using torify works, but causes:
      • error messages on STDERR
      • long timeouts (minutes, i.e. very slow scanning)
      • non-working DNS PTR lookup (should then use tor-resolve -x internally)

  • Report a "no route to host" as potentially being a RedHat, especially if other ports are reachable.

  • Maybe use https://repology.org/api and https://repology.org/project/openssh/versions instead of or in addition to scraping package lists. Probably filter returned list to only use these package names:

    • openssh
    • openssh-server
    • openssh-portable The following list is questionable as they're patched versions which may lag behind the unpatched version:
    • openssh-krb5 (SlackBuilds)
    • openssh-gssapi (AUR)
    • openssh-multiple-bindaddress (AUR)
    • openssh-with-hpn (nixpkgs)

  • Another source might be Wikidata's OpenSSH entry and its JSON representation.

    • Probably less reliable than repology because likely only manual / crowd-sourced data updates.

  • Add support for more Debian derivatives:

    • Supported derivatives ones like Trisquel, Linux Mint, and Kali Linux.
    • Live-CDs like Tails, Grml and Knoppix
    • Discontinued ones (you also want to detect them) like Tanglu

  • Let the package list parser optionally generate rules from every banner of a non-up-to-date or end-of-life version for SNORT (and hence also Suricata) and/or Zeek (formerly known as Bro).

  • Maybe also take the output of ssh-audit as a signature for an OS. Needs a collection of signatures, though.

  • Maybe allow scanhost.pl to read scan targets from STDIN or use a configuration file for batch scans, too.

  • Maybe use Data::Password or Data::Password::Entropy to better detect endlessh pre-banners.

Wishlist

  • A way to detect that some Linux distribution is running inside the Windows Subsystem for Linux (WSL).

License and Copyright

Copyright 2019, Axel Beckert [email protected] and ETH Zurich.

Dist-Detect is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

Dist-Detect is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with Dist-Detect. If not, see https://www.gnu.org/licenses/.

Files with Different Licenses

The guess_who_tux logo is derived from the Tux logo which is under Public Domain and inspired by the "Guess Who" t-shirts of Grazer Linuxtage 2013.

Thanks!

Resources

Slide Decks about Dist-Detect

Upstream Release Notes / Change Logs

Package Versions

OpenSSH

Dropbear

Specific Details

Similar Tools

  • ssh-version (probably too slow to be used as backend, more thought as small and simple commandline tool)

Unsorted