Skip to content

Latest commit

 

History

History
58 lines (42 loc) · 1.93 KB

README.rst

File metadata and controls

58 lines (42 loc) · 1.93 KB

XCORE.com ETHERNET SOFTWARE COMPONENT

Latest release:2.3.3rc0
Maintainer:DavidNorman
Description:A complete Ethernet MII and MAC interface for 100MBps Ethernet

Key Features

  • RX and TX on separate logical cores
  • Packet filtering by extension function
  • Memory based locking protocol
  • FIFO based memory allocation for lower RAM overhead
  • High priority (VLAN priority tag) queues
  • 802.1Qat traffic shaping

Low thread count MII driver

An alternative, low core count MII driver is available.

  • MII pins in 1 logical core
  • Rx buffer support handled by interrupt in a designated second task on a different core
  • Optional service task for providing an API similar to the 5-thread implementation

Firmware Overview

RX and TX are defined as functions which each run on their own logical core. Core usage is 5 logical cores for a single port (reducible to 4 for lower bandwith transmit applicatio). Ports must be MII and attached to the same xcore.

Known Issues

  • The rx_packet-rx_packet timing constraint may fail because of the user defined packet filters. The user is required to fill in the timing details inside any user specified filter in order to help the XTA analyze the receive filter timing correctly.
  • Packets exceeding the Ethernet maximum length can cause system crash
  • Does not reject Ethernet/Ethernet-II/Ethernet-DIX encoded frames where the frame length does not match the length field

Support

Issues may be submitted via the Issues tab in this github repo. Response to any issues submitted as at the discretion of the maintainer for this line.

Required software (dependencies)