From 78edc9eaf937f9d603ed625ccea9eeb6808de492 Mon Sep 17 00:00:00 2001 From: mkreisl Date: Fri, 3 Dec 2021 18:56:26 +0100 Subject: [PATCH] verup and ... - firmware: isp: Fix handling of different YUV colour spaces - firmware: poe_hat: Actually close the I2C handle - firmware: platform: Define DVFS modes and change default to be fixed AVS voltage - firmware: arm_loader: Auto-select 64-bit for kernel8.img See: #1193 - firmware: hdmi: Throttle auto-i2c register writes to avoid PWM audio underrun - firmware: platform: Define DVFS modes and change default to be fixed AVS voltage - firmware: arm_loader: Auto-select 64-bit for kernel8.img See: #1193 - firmware: hdmi: Throttle auto-i2c register writes to avoid PWM audio underrun - firmware: video_decode lockup handling - firmware: isp: Initialise extras to avoid vpitch being random - firmware: usb: Fix dropouts with USB ethernet gadget See: raspberrypi/linux#4084 - firmware: imx477: Allow long exposures for the binned modes. See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=297521 - firmware: arm_dispmanx: Use ALPHA_MIX flag See: https://www.raspberrypi.org/forums/viewtopic.php?t=300769 - firmware: power: Refactor the interface to the PMICs - firmware: platform: vl805: Get BAR2 address from PCIe BAR2 registers - firmware: arm_loader: Return all borrowed DMA channels See: #1541 - firmware: hdmi_2711: Rework I2C driver to NOT use the AUTO-I2C block - firmware: gencmd: Allow groups of clocks/plls to be read together - firmware: power: Fix DA9090 under-voltage detection - firmware: NVME boot support - firmware: brfs: Fix USB bulk-read in start.elf See: Hexxeh/rpi-firmware#258 - firmware: hdmi_2711_i2c: Correct handling of start/stop codes for long read See: #1548 - firmware: video_decode: For VC1/WMV with no signalled header bytes, use start of 1st buffer See: raspberrypi/linux#4113 - firmware: vl805: Remove redundant log statement and fix warning - firmware: power: Fix DA9090 ADC1 register definition - firmware: arm_loader: Only report clocks arm has set, not siblings - firmware: arm_loader: Don't report clocks set as turbo side effect of arm clock - firmware: arm_loader: 2711: gpu clocks are not dependant - firmware: platform: Need to clear cached versions of get_max_clock_internal vars - firmware: Move core to PLLA and support accurate clk108 See: xbmc/xbmc#19263 - firmware: board_info: Separate memory size from OTP field encoding - firmware: power: Swap DA9090 ADC assignments to match XR77004 - firmware: board-info: Fix memsize on 3B+ - firmware: vcfw/power: Add a new latch for power_pad_control See: #1552 - firmware: arm_loader: kernel_old=1 should force kernel_address=0 See: #1561 - firmware: scalerlib: Fix offset applied to x coordinate of YUV10COL image See: https://forum.kodi.tv/showthread.php?tid=361164&pid=3024654#pid3024654 - firmware: isp: Ensure the VRF is locked when setting up video colour denoise See: raspberrypi/libcamera-apps#19 - firmware: isp: Remove custom EV mappings from camera tunings - firmware: Add support for board-type=0xXX conditional filters in bootloader, bootcode and firmware - firmware: Two UART1 patches See: #1566 - firmware: Pi400: Reduce MII clock freq when probing ethernet PHY - firmware: platform: Remove build-time constant for MICROVOLTS_PER_PIP - firmware: dt-blob.dts: Correct HDMI HPD and EMMC_ENABLE for CM4 See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&p=1858516 - firmware: vcfw/hdmi: CUSTOM modes used for FKMS didn't set RGB quant range correctly See: #1580 - firmware: PoE+ HAT support See: raspberrypi/linux#4367 - firmware: arm_loader: Use Pi4 bootloader MAC_ADDRESS if set - firmware: platform: Apply ARM thermal throttling rules on BCM2711 - firmware: bcm_host: Recognise all Pi 4 variants, add BCM2711 See: raspberrypi/userland#695 - firmware: video_decode: Use the ISP instead of vc_image_convert - firmware: hdmi-2711: Wait for HDMI hardware scheduler to activate in HDMI mode - arm_loader: Add message to release firmware framebuffer - firmware: arm_loader: Add rng-seed DT property See: #1595 - firmware: isp: Set the YUV420/YVU420 format stride to 64 byte - firmware: Revert: video_decode: Use the ISP instead of vc_image_convert - firmware: cec: Avoid sending messages with kms See: raspberrypi/linux#4460 - firmware: hdmi_cec: Remove TX/RX SW_INIT on power_on See: Hexxeh/rpi-firmware#267 See: https://www.raspberrypi.org/forums/viewtopic.php?p=1895082#p1895082 - firmware: arm_dt: Limit CMA to 256MB if total_mem < 2GB or gpu_mem > 256MB See: #1603 - firmware: video_decode: Use the ISP instead of vc_image_convert - firmware: video_decode: Correct support for YVU formats using ISP - firmware: firmware: Disable VLL loading from file system See: #1605 - firmware: arm_loader: Make most arm clock requests required See: #1598 - firmware: arm_loader: Consider required flags from GET_CLOCK_RATE See: #1598 - firmware: arm_dt: Load overlays for detected cameras - firmware: Make more use of the user-warnings DT property - firmware: hdmi_2711: Use HDMI block REPEAT_PIXEL instead of PV See: https://forum.libreelec.tv/thread/24415-le-10-beta-for-i4-force-hdmi-resolution - firmware: DSI display autodetection for kms - firmware: arm_loader: Allow hvs interrupt during SET_NOTIFY_DISPLAY_DONE - firmware: arm_display: Allow null buffer in successful call See: raspberrypi/linux#4540 - firmware: video_decode: Ensure all buffers are flushed before port disable completes - firmware: filesystem: sdcard: Fix Hybrid GPT partitions See: #1465 - firmware: tvservice: Add check to warn when running with kms - firmware: arm_loader: Allow non-optional reads of current clock See: #1619 - firmware: dispmanx: Demote null eptr from vcos_verify to no warning See: raspberrypi/linux#4592 - firmware: filesystem: sdcard: Probe FAT type in GPT ESD partitions - firmware: clock-2711: Limit PLLB VCO frequency to the high range - firmware: arm_dt: Export the boot-mode, partition and usb state via device-tree See: #1621 - firmware: video_decode: i/p port enable/disable without o/p active could stall See: RPi-Distro/vlc#48 See: Hexxeh/rpi-firmware#272 See: #1637 - firmware: userland: Reduce debug_sym error messages See: https://forums.raspberrypi.com/viewtopic.php?f=98&t=322238 - firmware: arm_dt: Increase maximum line length to 98 See: raspberrypi/linux#4638 - firmware: arm_loader: Allow VEC clock to be controlled by arm - firmware: platform: Remove licence on VP6, VP8, Theora, and FLAC See: raspberrypi/linux#4661 - firmware: ISP: Fix magenta colour in right hand image of stereo pair See: https://forums.raspberrypi.com/viewtopic.php?t=321089 - firmware: platform: Fix incorrect turbo voltage scaling on Pi0 See: raspberrypi/documentation#2255 - firmware: platform: Declare CM4's SIO_1V8_SEL and SD_PWR_ON See: raspberrypi/Raspberry-Pi-OS-64bit#188 - firmware: hello_fft: Update outdated link to V3D spec - firmware: hello_fft: Remove unused function declaration See: #1645 See: raspberrypi/userland#710 - firmware: dtoverlay: Rebase aliases in overlays like labels - firmware: isp: Set core/vpu min clock to 320Mhz during ISP operation - firmware: arm_loader: Enable watchdog early if wanted See: #1651 - firmware: board_info: Add upstream dtb names for cm1 & 3 - firmware: board_info: Add upstream dtb name for cm4 See: #1660 - firmware: platform: Allow users to disable camera boot HMAC check See: #1657 - firmware: clock: 2711: Fix potential API issue in 2711 VCO setup - firmware: arm_loader: Enable USB MSD boot mode on Zero 2 W - firmware: isp: Fix Rec.709 colour space problems --- build/rpi/config_pkgver | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/build/rpi/config_pkgver b/build/rpi/config_pkgver index 2ead51d..bc5e199 100644 --- a/build/rpi/config_pkgver +++ b/build/rpi/config_pkgver @@ -1 +1 @@ -config_deb_version=9.5 +config_deb_version=10