Skip to content

Latest commit

 

History

History
1893 lines (1638 loc) · 131 KB

CHANGELOG.md

File metadata and controls

1893 lines (1638 loc) · 131 KB
Raw

ESPurna change log

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

Pending changes

  • Relay locks can be disabled through API (d3c113b7, 78c9e6a2)
  • Preserve existing relay locks when using sync modes (30f3123c, d3c113b7)
  • Fix Zero-Or-One and Just-One sync modes causing relays to stay locked forever (#2574) (11c89789)
  • Disable UART for MAXCIO_WDE004 (#2573)

[1.15.0-dev] Snapshot build 2023-01-12

Fixed

  • Uninitialized sensor info in Homeassistant discovery causing 'Unknown' entity (#2572) (d798052d)
  • Fallback AP should be disabled after timeout (#2571) (f387b864)
  • Invalid Domoticz settings strings (#2569) by @m-kozlowski
  • Lights value adjustments should work with floating point numbers (#2566) by @davebuk

Added

[1.15.0-dev] Snapshot build 2022-12-12

  • Handle telnet socket buffer when eol is missing; fix PuTTY (542188dd, 53633cfc)
  • Configurable accuracy and sensitivity (mtreg) for BH1750 (988a9724)
  • Power factor allowed values are 0...100 (52266684)
  • More GPIO source locations (b9dcf3e0)
  • API setting relay pulse to zero should stop the timer (bc2ce115)
  • Fix PULSE terminal command behaviour when we don't want to toggle relay status. Rename NORMAL STATUS to TOGGLE (PULSE <ID> <TIME> [<TOGGLE>], TOGGLE set to true by default) (69471b0a)
  • Fix overflow detection when parsing unsigned numbers (997c4d01)
  • Add 'value' slider to recover from a fully black RGB color picker (767cd72e)

[1.15.0-dev] Snapshot build 2022-12-04

  • Really parse V9261F messages, including writes and write acks (bea8508e)
  • Increase BH1750 MODE2 decimal places (b8921b9a)
  • Separate RGB color temperature in color and non-color modes (9126a983)
  • Revert default PWM frequency to 500Hz (or its equivalent) (d664b9d4)
  • Prevent GPIOs configured as relays from being initialized on software reset (824e1214)
  • Fix inverted relays being incorrectly initialized on boot (d78d7835)
  • Consistent warm and cold lights channel order in hardware header (144f2a72)

[1.15.0-dev] Snapshot build 2022-11-16

  • Fix V9261F UART parity mode (6154f40a)
  • Avoid printing raw network buffers or error strings that are not null-terminated (7296eca2)
  • Do not update brightness when changing HSV (2471c16f)

[1.15.0-dev] Snapshot build 2022-09-25

  • Runtime UART configuration. (uartBaud#, uartInv#, etc.), see uart and uart <id> terminal commands output. (574fbf19)

[1.15.0-dev] Snapshot build 2022-09-23

  • Change command-line parser (ef202109 for latest version; ref. #2245 and #2247 for previous implementation)
  • Do not share terminal output. Calling some command(s) in WebUI will no longer stream them to Serial; consistent with the output of API calls. (ef202109)
  • Add pio run -e $env -t .pio/build/$env/firmware.bin.gz build target (038f1ffe)
  • Renamed espurna-core to espurna-minimal (5bc55cd1)
  • Unauthenticated telnet session no longer receives debug messages (79ef68b4)
  • __UNIX_TIMESTAMP__ removed; build time remains __TIMESTAMP__ and as YYYY-MM-DD HH:MM:SS string (a8fe3e46)

[1.15.0-dev] Snapshot build 2022-08-30

  • Remove HWDT exception in RTCMEM, repeated hardware watchdog trigger will eventually trigger SAFE MODE (59c4246c, 7659a634)
  • Updated stack decoder script (a6df38e8)
  • NOTIFY terminal command (cc16c367)
  • Add pio run -e $env -t build-and-copy, more configuration options for the version string (6f122f5e, 4c33cacf)

[1.15.0-dev] Snapshot build 2022-08-16

[1.15.0-dev] Nightly build 2022-05-22

  • Magnitude variables may not end in number when there's only one of that type (5fcac5d2)

[1.15.0-dev] Nightly build 2022-05-18

[1.15.0-dev] Nightly build 2022-05-07

  • Add support for Itead Sonoff POW R3 (#2506, thanks to @nixkj)
  • Add PM1006 air quality sensor, found inside the IKEA VINDRIKTNING (#2505, thanks to @xoseperez)

[1.15.0-dev] Nightly build 2022-05-05

[1.15.0-dev] Nightly build 2022-01-14

  • Don't cancel saving the relayBootMask when relays are processed in a certain order (0c57f0bc)

[1.15.0-dev] Nightly build 2021-12-19

  • Update websocket client timeout and update message configuration to use seconds instead of milliseconds (135c7b80)

[1.15.0-dev] Nightly build 2021-11-26

  • Add support for Yagusmart switches (#2488, thanks to @MelanieT)
  • Use 64bit microseconds time source for uptime, no need to count overflows manually (1ca98880)
  • Update load average and system stability check intervals to use seconds instead of milliseconds (1ca98880)

[1.15.0-dev] Nightly build 2021-11-23

  • SHT3X: add missing I2C address A (0x44) (#2484, thanks to @drc38)
  • Deprecate ..._MIN_CHANGE and ..._MAX_CHANGE build flags in favour of per-magnitude runtime settings (1ef22e16)
  • Reduce IRAM usage in sensors using attachInterrupt() (9db679f9)
  • Terminal commands to set expected ratio (EXPECTED) and total energy recorded by the sensor (ENERGY) 8f7f1c96
  • Remove PZ.RESET and PZ.VALUE commands in favour of EXPECTED, ENERGY and MAGNITUDES (8f7f1c96)

[1.15.0-dev] Nightly build 2021-08-21

  • Off-by-one error when formatting to allocated buffer (efcb863c)
  • Check the return code of the git process and fail early, when trying to generate the version string (bdd821db)

[1.15.0-dev] Nightly build 2021-08-16

  • Don't treat static PROGMEM and generic C-strings differently (b167d616, d9662bd6)
  • Separate lights IDX from relays, migrate existing configuration from dczRelayIdx0 to dczLightIdx (94f31241)
  • Update latest Arduino Core platform to 3.0.2 (1ca8d5e7)

[1.15.0-dev] Nightly build 2021-08-06

[1.15.0-dev] Nightly build 2021-07-20

  • Display the device name in the WebUI (6b2c34ea)
  • Set websocket buffer to nullptr before returning control to the webserver, which will try to free() it (256e790e)
  • Use eslint and html-validate in CI (433f399d)
  • Set MQTT variables just before running the rules (32b864c5, 658ce105)
  • Remove jquery dependencies and clean-up websocket API (fa3deeff, 84a7f633, 8e5ab5c9)

[1.15.0-dev] Nightly build 2021-06-28

[1.15.0-dev] Nightly build 2021-06-22

  • Bump to 0.4.0 (fork) to support the latest Core version (0422d61c)
  • Schedule restore no longer depends on relays (c945c239, e22f67e5)
  • Fix setting up GPIO0 as INPUT when preparing to use analogRead(A0) (ff11e581)
  • Fix a typo when getting local index for Nth magnitude (6ba5f95e)
  • Rework build.sh & new release script generator (75b51f1e, 74e18a59)
  • Remove Core 2.3.0 support from .ld scripts (a1e7941f)
  • lightfox relay provider & buttonAdd (bd3a5889)
  • Use SoftwareSerial library from the Core (23da0b74)
  • Consistent shared libs location with CI and local install, prefer $repo/code/libraries (f18f128e, 5ccc70e4)
  • Further EmonSensor fixes and refactoring (b19905a3)
  • Rename generic pwr keys with a typed prefix (1a36efb8)
  • Tweak analogRead() frequency in Emon sensor (c136678a)

[1.15.0-dev] Nightly build 2021-05-21

[1.15.0-dev] Nightly build 2021-05-14

  • Add support for SmartMeasure SM300D2-VO2 air quality multi-sensor (#2447, thanks to @xoseperez)

[1.15.0-dev] Nightly build 2021-05-02

[1.15.0-dev] Nightly build 2021-01-16

[1.15.0-dev] Nightly build 2021-01-06

  • Send co2 ppm as nvalue (d04b85ac)
  • Simplify version + revision into just version (f0f6f1b8)

[1.15.0-dev] Nightly build 2020-12-25

[1.15.0-dev] Nightly build 2020-12-06

  • Rework plain and JSON implementations (#2405)

[1.15.0-dev] Nightly build 2020-11-29

  • Default Emon ratios at compile time (12ae9d15)

[1.15.0-dev] Nightly build 2020-11-03

[1.15.0-dev] Nightly build 2020-10-29

  • Fix device discovery / state callback (#2388, thanks to @aL1aL7)

[1.15.0-dev] Nightly build 2020-10-16

[1.15.0-dev] Nightly build 2020-10-01

  • Only change EventSensor counter from the ISR (735e5c0e)

[1.15.0-dev] Nightly build 2020-09-27

  • add missing lights #include for rpn rules (#2367, thanks to @ngilles)
  • Detect Tasmota magic numbers when booting, and do a preventive factory reset (#2370)

[1.15.0-dev] Nightly build 2020-09-25

  • Resistor ladder / analog buttons support (#2357)
  • Add support for Gosund SP111 (hardware version 1.1 16A) (#2360, #2369, thanks to @alextircovnicu)
  • system operators sleep and rtcmem (#2366)

[1.15.0-dev] Nightly build 2020-09-16

[1.15.0-dev] Nightly build 2020-09-05

  • Add support for the Zhilde ZLD-64EU-W (#2342, thanks to @biot)

[1.15.0-dev] Nightly build 2020-09-01

[1.15.0-dev] Nightly build 2020-08-27

[1.15.0-dev] Nightly build 2020-08-15

[1.15.0-dev] Nightly build 2020-08-14

[1.15.0-dev] Nightly build 2020-08-12

[1.15.0-dev] Nightly build 2020-08-03

[1.15.0-dev] Nightly build 2020-07-20

[1.15.0-dev] Nightly build 2020-07-17

  • Implement support for ProDino WIFI (#2269, thanks to @dpeddi)

[1.15.0-dev] Nightly build 2020-06-28

[1.15.0-dev] Nightly build 2020-05-27

  • Refactor WS implementation, add some comments to the header (#2261)

[1.15.0-dev] Nightly build 2020-05-26

  • Handle received data as terminal command (#2247)
  • Handle received payload as terminal input (by default, <root topic>/cmd) (#2247)

[1.15.0-dev] Nightly build 2020-05-22

[1.15.0-dev] Nightly build 2020-05-18

[1.15.0-dev] Nightly build 2020-05-13

  • rpn $relayX variables were not populated on boot (#2246, thanks to @pezinek)
  • Properly dispatch emon sensor ratio defaults (#2241)
  • Directly iterate over internal callbacks array (#2248, #2261)
  • Add support for HUGOAI smart socket plug. (#2243, thanks to @estebanz01)
  • Load ratios after boot + show pwr defaults with get (#2241)

[1.15.0-dev] Nightly build 2020-05-02

[1.15.0-dev] Nightly build 2020-05-01

[1.15.0-dev] Nightly build 2020-04-29

  • Do not put floats into nvalue (#2230)
  • Constrain pressure to 0...100 (#2230)
  • HLW8012: energy_delta (#2230)

[1.15.0-dev] Nightly build 2020-04-26

[1.15.0-dev] Nightly build 2020-04-08

Sensors

PlatformIO

  • platformio.ini refactoring (#2212)
  • Rename generic environments (#2214)

[1.15.0-dev] Nightly build 2020-04-02

  • Gosund WP3 LED documentation and provide reasonable default actions (#2200, thanks to @ziggurat29)

[1.15.0-dev] Nightly build 2020-03-31

  • Board definition for the Gosund WP3 smart socket (#2191, thanks to @ziggurat29)

[1.15.0-dev] Nightly build 2020-03-21

  • Example for Generic ESP01 boards with 512KiB flash (#2185, thanks to @ziggurat29)
  • Allow to disable Web(UI) OTA support (#2190)
  • Always buffer incoming MQTT (#2181)

[1.15.0-dev] Nightly build 2020-03-13

  • Apparent, reactive power measurement unit corrections (#2161, thanks to @irmishappy)
  • Add support for read PIO-A of DS2406 (#2174, thanks to @rmcbc)
  • Update migrate configuration & conditions, allow each module to access the current & previous version (#2176)

[1.15.0-dev] Nightly build 2020-03-08

[1.15.0-dev] Nightly build 2020-02-20

PlatformIO

  • Use development version of PlatformIO Core in CI (#2146, thanks to @ivankravets)
  • Bump RFM69 version (#2148)
  • Pin arduino-mqtt version (#2154)

System

  • Fix http response parsing, refactor module scope (#2153)
  • Set keepalive to be less than heartbeat interval (#2154)

Hardware

[1.15.0-dev] Nightly build 2020-02-09

  • Configure Thingspeak URL at runtime (#2124, thanks to @sametflo)
  • Refactor deprecated WiFiClientSecure (#2140, #2144)
  • WebUI: alert when web socket connection closes (#2131, thanks to @foxman69)

[1.15.0-dev] Nightly build 2020-02-05

  • Show pretty uptime string with NTP_SUPPORT=1 (#2137)

[1.15.0-dev] Nightly build 2020-02-04

  • Configure light dimmer pins from settings (#2129)
  • Use sntp app from lwip on latest Cores, replace NtpClient (#2132)

[1.15.0-dev] Nightly build 2020-01-22

[1.15.0-dev] Nightly build 2020-01-21

System

  • Refactor get/set/del/hasSetting (#2048)
  • Fix GPIO16 support (#2110, thanks to @foxman69)
  • Optionally preserve boot log in RAM (#2109)
  • Log modes, allow to disable debug messages on boot (#2116)

MQTT

Hardware

  • Added hardware config for Avatto NAS-WR01W (#2113, thanks to @blockmar)

PlatformIO

  • Deprecate -ota envs, handle OTA condition in extra script (#2099)

[1.15.0-dev] Nightly build 2020-01-14

WebUI

Hardware

[1.14.1] 2019-12-31

Fixed

Devices

Domoticz

  • Fix unresponsive switches, use proper datastructure to track state (#2049)

InfluxDB

  • Use sensor "report" instead of sending data each reading. Use async client, send data in batches (#2061)
  • Don't queue any new data while connecting

IR

  • Revert "ir: use proper methods" (#2066, thanks to @sehraf for reporting the issue)

OTA

  • Verify data stream and properly handle errors. Do not write to flash when any error was encountered. (#2067)

Sensor

  • Use different Broker instances for read and report data (#2061)

WebUI

  • Fix LED mode title style (#2038, thanks to @foxman69)
  • Properly handle websocket payloads when scheduler is disabled (#2050)
  • Fix colorpicker not working in RGB mode (#2053)
  • Remove some unused code from resulting image (#2053)

Added

Devices

  • Add GENERIC_E14, e14 rgb+w 4,5w (#2039, thanks to @orrpan)
  • Add support for LinkSprite R4 (#2042, thanks to @mpcusack)
  • Add support for eHomeDIY devices. (#2046, thanks to @user890104)
  • Add support for MAGICHOME_ZJ_WFMN_C_11 (#2051, thanks to @davebuk)
  • Add support for the LSC LED LIGHT STRIP from ACTION using a tuya chip. (#2065, thanks to @sehraf)
  • Add LOHAS_E26_A19, rename LOHAS_9W to LOHAS_E27_9W (#2068, thanks to @cro for providing A19 configuration)

Home Assistant

  • Try to avoid conflict with useCSS (#2075)

WebUI

  • WebUI fix change detection of input elements (#1986)

Changed

Build

  • Removed unneeded reference to Ticker library in RFBridge module

PlatformIO

  • Update latest Arduino core platform to 2.6.3 (#2069, thanks to @Niek)
  • Test espurna-core feature build (#2080)

Scripts

  • Using python3 by default in OTA manager
  • Force get_device_size to return an int in OTA manager
  • Beautify build script size output
  • ota.py version 0.4 (#2020)
  • Do not run test stages on tag in Travis CI (#2052)

[1.14.0] 2019-11-29

Fixed

Security

  • Web OTA: check authentication result before accepting payload (#1812)
  • Authenticate /reset endpoint (#1858, thanks to @foxman69)

General

  • Avoid crashes when using NTPClientLib (#1642)
  • Safer loop delay default (#1574, #1631, #1699)
  • Patch lwip1 MTU bug in travis-ci releases (#1723)
  • Store default LED settings exactly once (#1719, #1724)
  • Backup EEPROM before performing OTA (#1808, #1809, #2028, thanks to @arihantdaga)
  • Properly handle telnet negotiation (#1927, thanks to @Niek)
  • Markdown Typo Fix (#1926, thanks to @mx-web)
  • Port PROGMEM definition from Cores 2.5.0+ for Core 2.3.0 to fix flashstring use in classes (#1374)
  • Use relative time for relay scheduling (#1962)
  • Enable all heartbeat messages when hbReport => "1" (#2003)

Devices

WiFi

  • Don't change softAP configuration while user is still connected (#1881)
  • Place WIFIN_... strings in flash (#1893)

MQTT

  • Reset connection timer with PubSubClient / ArduinoMQTT (#1702)
  • Remove 'connecting' flag when connected (#1757)
  • Fix Arduino-MQTT setWill parameters order (#1978, thanks to @Niek)

Domoticz

  • Fix crashes with unknown idx values (#1588)
  • Treat nvalue >= 1 as true (#1606)
  • Lights: handle cmode=2 (#1880)

Thingspeak

  • Several async client fixes to avoid crashes (#1806)

Home Assistant

  • Send brightness topic to HA regardless of color setting (#1730, thanks to @copyrights)
  • Rework discovery mechanism to prevent loosing messages (#1969)
  • Send discovery messages after reconnecting (#1637, #1969)

Lights

  • Fix relay provider setting of Xiaomi Smart Desk Lamp (#1627, thanks to @Ctrl-F4)
  • Prepare for .cpp migration (#1874)
  • Fix inconsistent light transitions (#1901, #1923)

WebUI

  • WebUI relayOnDisc selector typo (#1643)
  • Avoid memory leak when using captive portal (#1768)
  • Updated WS protocol structure to reduce memory usage (#1843, #1851, #1857)
  • Send debug messages in batches (#1851)
  • Wait for data to be saved before rebooting (#1863, thanks to @foxman69)

Sensors

  • Fix cse7766 missing energy magnitude (#1665, thanks to @lipoforall)
  • Fix stored energy values when using kWh (#1334
  • Remove pinMode(0, ...) from AnalogSensor (#1777, #1827)
  • Check value range for PMSX005 and SenseAir CO2 sensor (#1865, thanks to @Yonsm)
  • DHT: Increase read delay to 1100 usec per datasheet value for DHT_CHIP_DHT22 (#1918, #1979, thanks to @JavierAder and @structuralB)
  • DHT: Add DHT_CHIP_SI7021 for ITEAD_SONOFF_TH, use 500 usec read delay (#1918, #2000, thanks to @icevoodoo)
  • DHT: Set pin mode before digitalWrite (#1979)
  • DHT: Wait DHT_MIN_INTERVAL after initialization (#1979)

Build

  • Fix Travis failing with INFLUXDB_SUPPORT (#1565)
  • Build with platformio 4 (#1805)
  • Update wrong pinout on ag-l4 (#1746, thanks to @zerog2k)
  • Core 2.6.0+ fixes (#1852)
  • Add missing DOMOTICZ_... #ifndef guards (#1839)
  • Add #ifndef guard for BMX280_... defines (#1867, thanks to @0x3333)
  • MQTT: update MQTT_MAX_PACKET_SIZE to fit JSON payload (#1888)

Added

General

  • RPN Rules - custom rules to execute actions (mostly changing relay and light statuses) based on different inputs (#1984, thanks to @xoseperez)
  • Initial implementation of RTCMEM storage to preserve state (relay status, stability counter, energy etc.) between reboots (#1420, #1770)
  • Allow to configure all LEDs from UI (#1429, thanks to @xoseperez)
  • SYNC_FIRST relay sync mode (#1609, thanks to @foxel)
  • Fix ESP.eraseConfig() when using Core 2.3.0 (#1595, #1616)
  • Add UNUSED macro to prevent warnings
  • Log in travis-ci if WebUI files have changed
  • Terminal: heap fragmentation stat (#1740)
  • Recommend using basic BearSSL ciphers with low memory boards (#1810, thanks to @Niek)
  • New boot mode to lock relay status on boot (RELAY_BOOT_LOCKED_OFF and RELAY_BOOT_LOCKED_ON) (#1705)
  • Add netstat and dns probing (Core 2.5.2+) (#1907)
  • Add setting for WiFi TX power (wifiTxPwr) (#1915)
  • SoftAP button action will now toggle back to STA mode (#1942)
  • Detect esp8285 chip to allow the use of GPIO9 and GPIO10 (#1958, #1964 and thanks to @Niek for bitset::test fix in #1977)
  • Restore last schedule after reboot (#1948, thanks to @foxman69)
  • Add relayDelayOnN, relayDelayOffN, relayFloodTime, relayFloodCount as runtime settings (#1594, #1962)
  • Add experimental relayDelayInterlock to add a pause after turning relay off in SYNC_ONE or SYNC_NONE_OR_ONE modes (#1510, #1962)
  • Add experimental TUYA_SUPPORT and LIGHT_PROVIDER_TUYA (#1729, #1997)
  • Add bssid as heartbeat option (#1995)
  • Generic feature checks through <type_traits> (#1974, thanks to @Niek)
  • Support binary, octal and hex literal prefixes (0b, 0o and 0x respectively) for hbReport setting (#2003)

MQTT

  • Add option to disable relay reporting (#1645, thanks to @Niek)
  • Safer settings reload and change detection (#1701)
  • mqtt.info command (#1757)
  • MQTT rewrite with SSL fixes (#1751, #1829, thanks to @Niek)
  • Generic secure client configuration (#1873)
  • Custom relay status payloads (#1885, #1889)
  • Log size instead of message itself when size is > 128 bytes (#1969)

Home Assistant

Devices

WebUI

  • Configure WEB_REMOTE_DOMAIN at runtime (#1789)

Modules

  • Add Thermostat module (#1603, thanks to @ElderJoy)
  • RF/RFBRIDGE Update (#1693)
  • Send Vcc, LoadAvg and Ssid to influxdb (#1714, thanks to @lucciano)
  • Separate device name for alexa integration (#1727, thanks to @m-kozlowski)
  • Telnet/WiFiServer: alternative to ESPAsyncTCP (#1799) (Thanks to @Niek)
  • Periodically call etharp_gratuitous (#1877)
  • Added support for reverse telnet (#1920, thanks to @Niek)

Sensors

Lights

  • Allow to set relative brightness, channel value and color in mireds using +N and -N notation (#1607, #1938, thanks to @tsymbaliuk)
  • Two channel CCT (#1732, thanks to @copyrights)
  • Send to mired topic if CCT is in use (#1732, #1742, thanks to @copyrights)
  • Add description for each channel when using terminal commands (#1826)
  • Channel value change detection to reduce light provider updates (#1914)

Build

  • special dummy printf to disable Serial using some boards (#1664)
  • Experimental support of HTTPUpdate for OTA (#1751)
  • Add ability to print all GPIO values at once (#1798, thanks to @Niek)
  • DEBUG_SUPPORT check for crashSetup (#1807)
  • Build date in ota.py (mDNS) (#1736, thanks to @m-kozlowski)

Changed

General

  • Updated Copyright notice to 2019
  • Use espurna.io as CORS domain
  • Small design change in memanalyzer output and fix out-of-range error
  • Update PlatformIO Core versions (#1734)
  • Show Core revision as hex string (#1786)
  • Update debugSend / debugSend_P (#1788)
  • Send RF MQTT message with retain off (#1679, thanks to @Niek)
  • Thermostat upgrade (#1711, thanks to @ElderJoy)
  • Update crash handler (#1796, #1947)
  • Drop legacy relay settings migration (#1797)
  • MQTT & OTA Fingerprint setting capitalization fix (#1952, thanks to @Niek)

WiFi

  • Let JustWifi fallback mode handle AP (#1784)
  • Start SmartConfig without any networks configured (#1785)

Domoticz

  • Less debugging for lights code (#1588)

WebUI

  • Send status right after boot to avoid some empty fields on Status page (#1700)
  • Parse host query via browser api, add console logging (#1901)
  • Update to jquery 3.4.1 and wheelcolorpicker 3.0.8 (#1901)

Lights

  • Import Encoder library (#1769)
  • Apply brightness to all channels only when useWhite is disabled (#1826)
  • Move gamma table to PROGMEM (#1826)
  • Don't show v for hsv in wheelcolorpicker, use brightness instead (#1901)
  • Fix kelvin/mired constants naming (#1902)
  • Store pwm constants as PROGMEM data (#1906)
  • Schedule provider update in CONT instead of SYS context (#1901, #1923)
  • Configurable cold and warm mired values (#1945)
  • Update XIAOMI_SMART_DESK_LAMP warm mired value (#1945)

Sensors

  • Change from BMX280_ADDRESS2 notation to BMX280_NUMBER for number of sensors (#1647, thanks to @CraigMarkwardt)
  • Allow sensor class can specify the number of decimals to represent its magnitude types (#1648, thanks to @CraigMarkwardt)
  • Default to one BMX280 sensor (#1690)
  • Rename NTC/LDR_SENSOR to NTC/LDR_SUPPORT (#1758)
  • Faster event handling for EventsSensor (#1771)
  • Use indexed keys for energy saving (#1875)
  • Enable multiple Digital & Events sensors (#1832, thanks to @pilotak)

Build

  • .ld scripts refactoring to allow building with Cores 2.3.0 ... 2.6.0 (#1559)
  • Pin ArduinoJson version (#1613)
  • Remove gosund-sp1-v23 env in favour of blitzwolf-shpx-v23 (#1703)
  • Update ESPAsyncTCP to 7e9ed22 (#1752, #1806)
  • PIO4: default_envs (#1793, thanks to @Niek)
  • PIO: Use up-to-date platforms, update comments (#1811, #2023)
  • Move DEVICE and MANUFACTURER check to the top of hardware.h (#1816, thanks to @rmcbc)

[1.13.5] 2019-02-27

Fixed

  • Revert loopDelay dependency on wifi sleep mode (#1574)
  • Fix hardcoded serial objects in _debugSendSerial, terminalLoop and PZEM sensor (#1573)
  • Fix RFBridge not showing codes in web UI as per @mcspr suggested change (#1571)
  • Fix BSSIDs in scan output (#1567)
  • Fix PZEM004TSensor pointer use
  • RFBridge: fix webui codes parsing
  • Avoid websocket ping back on fw upgrade via web UI form (#1574)
  • Removing line break before templated variable to fix issue with Windows Arduino IDE (#1579, thanks to @AlbertWeterings)
  • Send brightness to websocket

Added

  • Relay MQTT group receive-only sync mode setting
  • Set wifi sleep mode from settings
  • Add unique id and device support for better HA UI integration (#1547, thanks to @abmantis)
  • Improved inline documentation of BMX280 settings (#1585, thanks to CraigMarkwardt)

[1.13.4] 2019-02-21

Fixed

  • Travis fixes
  • IR results on raw mode (thanks to @vtochq)
  • Missing configuration in HTTP API (#1288)
  • NTP sync changes (#1342)
  • Proper buffer size to fit two digit rfbOFF key (#1348)
  • Use correct arguments for stat on macOS (#1355, thanks to @jackwilson)
  • Enable reload command when no web support (#1383)
  • Wrong GPIO value for dummy relay (#1386)
  • Wait until mqtt client has finished trying to connect
  • Disable EEPROM Rotate before NoFUSS update (#1398, thanks to @arihantdaga)
  • Only check domoticz state in broker callback (#1562)
  • Fix upload_port and upload_args
  • Fix heartbeat dropdown size
  • Setup settings before using them in system module (#1542)
  • Fix HEARTBEAT_REPORT_DESCRIPTION typo (#1539)
  • Fix wsDebugSend prototype
  • Fix pulse for dummy relays (#1496, thanks to @Niek)
  • Fix RFBridge websocket data
  • Only process Domoticz RGB MQTT Messages for the current idx (#1489, thanks to @soif)
  • Fix pulse for dummy relays
  • Fix compile error when both RF_SUPPORT and API_SUPPORT are enabled (#1479, thanks to @Niek)
  • Fix compile error when TERMINAL_SUPPORT is disabled (#1426)
  • Fix compile error when RF_SUPPORT is enabled (#1475)
  • Fix CodingStyle link (#1473)
  • Fix: Add Debug flag for compilation of wifiDebug() function (#1454)
  • Fix bug in RFM69 that counted packets twice
  • Escape hyphens in img.shields.io urls
  • Fix travis builds based on latest core
  • Increase buffer size to fit B0 code (#1423)
  • Fix function call typo in RF code (#1421)
  • Fix RF code conversion to long (#1410)

Added

  • Support for MAXCIO W-DE003 device (thanks to @kerk1v)
  • Support for Tonbux XS-SSA01 device (thanks to @StevenWolfe)
  • Support for Blitzwolf BW-SHP2 v2.3 (#1351)
  • Support for Tecking SP22 v1.4+
  • Support for Lombez Lux Nova 2 smart bulbs (thanks to @kcghost)
  • Support for Orvibo B25 (#1402, thanks to @plutec)
  • Support for GBLife RGBW Socket (#1305)
  • Support for Generic Relay ESP01 V4.0 in inverse relay version (#1504, #1554)
  • Support for Gosund WS1 aka KS-602S (#1551, thanks to @nsvrana)
  • Support for Oukitel P1 smart switch (#1553, thanks to @quinnsam)
  • Support for Lyasi light bulb (#1533, thanks to Eichhoernchen)
  • Support for RGB(WW) controlled using Domoticz MQTT messages (#1459, thanks to @sq5gvm)
  • Support for newer AL-LC02 boards with different pinout (#1469, thanks to @sq5gvm)
  • Support for SmartLife Mini Smart Socket RGB (thanks to @kuppe234, #1411)
  • Support for Gosund SP1 v2.3 (#1448)
  • Support for OBI Wifi Schuko Plug V2 (#1408, thanks to @arthurf1969)
  • Support for pulse meter power sensor for new-generation smart-meters
  • Support for VL53L1X ToF sensor (thanks to @ruimarinho)
  • Support for VEML6075 UV sensor (thanks to @ruimarinho)
  • Support for EZO pH Circuit sensor (thanks to @ruimarinho)
  • Support for MAX6675 temperature sensor (#1375, thanks to @lucciano)
  • Support for MagicHome ZJ WFMN A/B v1.1 (#1339)
  • Support for multiple PZEM004T sensors (thanks to @0x3333)
  • Support for Support PMS5003S (#1511, thanks to @Yonsm)
  • Support for pulse meter power sensor for new-generation smart-meters (including debouncing and energy ratio support by @jackwilson)
  • Support for BMP085 and BMP180 sensors (#1082)
  • Add dim up and down actions to button handler (#1250)
  • Compact WS data (#1387)
  • Improved analog sensor (#1326, thanks to @cconde)
  • Report SSID in heartbeat messages
  • Option to send full data to thinkgspeak on every message (#1369)
  • Added RSSI to InfluxDB heartbeat (#1400, tahnks to @BuildTheRobots)
  • Option to report time even if no NTP sync (#1310)
  • Support for mixed combination of real and dummy relays (#1305)
  • Report target color values on MQTT and API
  • Note on WiFi tab about hostname (#1555)
  • Allow saving heartbeat settings from web (#1538)
  • Build images for Sonoff Basic R2 with DHT and DALLAS support
  • Add warning about TELNET_PASSWORD
  • Domoticz: track last relay state (#1536)
  • Adding description field to web UI, reporting it via MQTT (#1523)
  • ESP-01 + 2ch 5v relay LC tech Exclusive relay on (#1519, thanks to @clabnet)
  • Add OTA support over MQTT (#1424, thanks to @Niek)
  • Configure Heartbeat from WebUI & option HEARTBEAT_REPEAT_STATUS (#1474, thanks to martiera)
  • Delay light comms (mqtt, ws, broker) to avoid jamming
  • Added message type to broker
  • Yield() after handling OTA request
  • Disconnect websocket when auth fails
  • Manage relay changes in third party modules via broker
  • Added API entry points for RFBridge module (#1407)
  • Domoticz over MQTT to Espurna RGB/RGBW/RGBWW
  • Debug check position to make sure definition is not nullified to avoid putting checks in all places
  • MQTT reconnect delay based on last disconnection
  • Add terminal support for wifiDebug
  • Created contribute.md and support.md files
  • Created issue templates
  • Runtime heartbeat configuration (#1406)
  • APP_VERSION suffix (#1418)
  • Allow {hostname} and {mac} placeholder for mqtt user and client_id fields (#1338)
  • Split ws messages for relays and rf codes (#262)
  • Added learn and forget terminal commands to RFBridge and RF modules (#1253)
  • Change light transition time via MQTT or API (#1412)

Changed

  • Telnet password requirements (#1382)
  • Separate tab for NoFUSS options (#1404)
  • Updated to use gulp4 (#1403)
  • Updated to EEPROM_Rotate 0.9.2
  • Show proper switches names in web UI
  • Removing loop delay if WIFI is not set to sleep, reducing it to 1ms otherwise (#1541)
  • Change naming for BlitzWolf SHP2 and SHP6 (now SHPX) boards
  • Print each HA config entry separately (#1535)
  • Updated DebounceEvent to 2.0.5 (#1527, #1254)
  • Python cleanup (@1526, thanks to Cabalist)
  • Normalize naming for Arilux AL LC02 v14
  • Increase version field size in OTA manager
  • Merge RF and RFBridge code (#1435, thanks to @Niek)
  • Update to fauxmoESP 3.1.0
  • Move crash code to it's own module

[1.13.3] 2018-10-08

Fixed

  • Honour build time settings for MQTT on fresh install (#719)
  • Fix custom_crash_callback declaration for Arduino IDE 1.8.6 (#1169)
  • Fix eneUnits key in web UI (#1177)
  • Fix HA names (#1183)
  • API is now restful (issue a PUT to change a relay status). It can be disabled from web UI (#1192)
  • Remove static array to prevent out of bound in relay.ino (#1217)
  • Remove duplicate call to EEPROMr.begin (#1214)
  • Fix issue when SPIFFS_SUPPORT is enabled (#1225)
  • Fix quoting units_of_measurement in HA config output (#1227)
  • Fix "Clear counts" on rfm69 does not reset node count properly (thanks to @Trickx, #1239)
  • Fix homecube 3rd led setting (thanks to @mcspr)
  • Fix typo in static IP hint text (@thanks to @zafrirron)
  • Fix hostname/password length requirements (thanks to @mcspr and @djwmarcx)
  • Do not quote numbers in MQTT JSON payloads
  • Fix telnet client object deletion (thanks to @mcspr)
  • Call wakeUp PMS on first reading cycle to avoid not data in a long period (thanks to @Yonsm)
  • Small fixes and windows support for ESPurna OTA Manager (thanks to @mcspr)
  • Fix for YiDian XS-SSA05 configs (thanks to @ducky64)
  • Send MQTT messages only for button events with assigned actions (thanks to @Valcob)
  • Avoid EEPROM commits on callbacks (#1214)

Added

  • Option to report energy based on delta since last report (#369)
  • Support for IR-MQTT bridge, also in RAW mode (#556, #907)
  • Allow faster sensor reading intervals, down to 1 second (#848)
  • Support for Xiaomi Smart Desk Lamp (#884)
  • Retry up to 3 times on bad response to Thingspeak server (#1213)
  • Support for apparent power and power factor on CSE7/XX sensor (#1215)
  • Support for encoders
  • Support for Allterco Shelly2
  • Added SDS011 sensor support (thanks to @derlucas)
  • Added password check to telnet (option to disable it)
  • Added PHYX support (thanks to @whitebird)
  • Added config command that outputs the configuration in JSON
  • Support for MICS-2710, MICS-5525 and MICS-4514, gas sensors
  • Support for iWoole LED Table Lamp (thanks to @CollinShorts)
  • Command to output free stack
  • Password management from web UI (thanks to @mcspr)
  • Added BESTEK MRJ1011 support (thanks to @InduPrakash)
  • Support for EXS WiFi Relay 5.0 (thanks to @cheise, #1218)
  • Allowing disabling or single heartbeat on MQTT connect or repeat (default) (#1196)
  • Command to save settings when SETTINGS_AUTOSAVE is off

Changed

  • Upgraded to JustWifi 2.0.2
  • Upgraded to FauxmoESP 3.0.1
  • Upgraded to DebounceEvent 2.0.4 to properly support BUTTON_SWITCH
  • Split info command output into info and wifi. Refactor output.
  • Custom HA payloads (thanks to @Yonsm)

[1.13.2] 2018-08-27

Fixed

  • Fix relay overflow window length
  • Fix TravisCI release condition (thanks to @mcspr, #1042)
  • Fix Sonoff RFBridge build in Arduino IDE (#1043)
  • Using corrent path separator in gulpfile.js (thanks to @InduPrakash, #1045)
  • Fix KMC70011 LED logic (thanks to @zerog2k, #1056)
  • Fix Luani HVIO to use 1MB flash size and toggle switch (thanks to @BauerPh, #1065 and #1068)
  • Fix switches in Microsoft Edge (thanks to @Valcob, #1066)
  • Fix build.sh error handling (thanks to @mcspr, #1075)
  • Correctly init Serial on RELAY_PROVIDER_STM (#1130)
  • Disconnect before running WPS and SmartConfig discovery (#1146)
  • Fix sort fields in OTA manager

Added

  • Support for YJZK 1Ch and 3CH switches (thanks to @CollinShorts and @q32103940, #1047)
  • Support for AG-L4 color desk lamp (thanks to @zerog2k, #1050)
  • Option to cofigure ON/OFF payload at build time (#1085)
  • Option to change default payload for HA (#1085)
  • Support for Allterco Shelly1 (thanks to @abmantis, #1128)
  • Support for HomeCube 16A (thanks to @hyteoo, #1106)
  • Support for multiple sonar sensors (thanks to @ruimarinho, #1116)
  • Support for hardware serial on PMSX003 device (thanks to @ruimarinho, #1122)
  • Support for Lohas 9W bulbs (thanks to @steveway, #1135)
  • Show literal for webUI image in info (#1142)
  • Add RFBRIDGE code to full webUI image (#1157)
  • Handle events in EventSensor
  • Option to remove API_SUPPORT at build time
  • Option to save total energy in EEPROM after X reports, disabled by default
  • Support for DHT12 sensor (thanks to Altan Altay)
  • Support for 2MB flash boards

Changed

  • Update PlatformIO support to 3.6.X branch
  • Explicitly disable ATC on RFM69 gateway (#938)
  • Reduce memory footprint of API calls (#1133)
  • Init relay GPIO when in inverse mode to be OFF (#1078)

[1.13.1] 2018-07-10

Fixed

  • Build issues with Arduino IDE (#975)
  • Right web interface image for with RF Bridge
  • Full web interface image if light and sensor together (#981)
  • Some devices still not using DOUT flash mode
  • Crash on loading malformed configuration file
  • Mismatch between memory size and layout size for some boards (this might require reflashing)
  • Wrong settings report after factory reset
  • Memory leak in JustWifi library
  • New buttons not rendering right in Safari (#1028)

Added

  • Support for RFM69GW board (see http://tinkerman.cat/rfm69-wifi-gateway/)
  • Support for Sonoff IFAN02
  • Support for NTC sensors (#1001)
  • Support for single-pin latched relays (#1039)
  • Check binary flash mode in web upgrade
  • Sampling to AnalogSensor
  • Parallel builds in Travis (thanks to @lobradov)

Changed

  • Reworked platformio.ini, build.sh files (thanks to @gn0st1c and @mcspr)

[1.13.0] 2018-06-22

Fixed

  • Fixed PZEM004T compilation issues, working when using hardware serial (#837)
  • Fixed per channel state on/off for lights (#830)
  • Fixed overflow in CSE7766 energy calculation (#856)
  • Fixed On MQTT disconnect in web UI (#845)
  • Check valid hostnames (#874, #879)
  • Fix Sonoff POW R2 configuration
  • Fixed InfluxDB sensor by id (#882)
  • Fix build when disabling WEB_SUPPORT (#923)
  • Fix calibration error in EmonSensor (#876)
  • Fix telnet and web debug responsiveness (#896)
  • Use double quotes in JSON for non-numeric values (#929)
  • Support connections over HTTPS via proxy (#937)

Added

  • EEPROM sector rotation using EEPROM_Rotate library
  • Code filtering when building web UI images
  • Added pulsing a relay via MQTT and REST API (#896, #902)
  • Support for WPS (not available in pre-built binaries)
  • Support for Smart Config (not available in pre-built binaries)
  • Support for CCT lights (thanks to @Skaronator)
  • Allow RELAYx_DELAY_ON/OFF also for none GPIO relay types (thanks to @zafrirron)
  • Added relay status to Domoticz on MQTT connection (#872)
  • Added configurable UART-to-MQTT terminator
  • Added telnet link to web UI
  • Reload terminal command to force all modules to reload settings from config (#816)
  • Added security headers to each HTTP response (thanks to @ITNerdBox)
  • Customized GET terminal command (thanks to @mcspr)
  • More RC codes supported on TX for RF Bridge (thanks to @wildwiz)
  • Support for BL0937 power monitoring chip with unmodified HLW8012 library (#737)
  • Enable CORS
  • Support for Allnet ESP8266 UP Relay (thanks to @bajo)
  • Support for Tonbux Mosquito Killer (thanks to @gn0st1c)
  • Support for Neo Coolcam NAS-WR01W WiFi Smart Power Plug
  • Support for TYWE3S-based Estink WiFi Power Strip (thanks to @sandman, #852)
  • Support for Pilotak ESP DIN V1
  • Support for DIY Geiger counter (thanks to @Trickx)
  • Support for HomeCube / Blitzwolf BW-SHP2
  • Support for Vanzavanzu Smart Wifi Plug Mini
  • Support for Bruno Horta's OnOfre board

Changed

  • Updated PlatformIO to use Core 3.5.3
  • Updated to JustWifi 2.0
  • CSS optimizations (#870, #871)
  • Several changes in OTA Manager
  • Better memory layout info
  • MQTT keep alive time increased to 300s
  • Using ticket-based authentication for WS
  • Refactor module and sensor listings (#896)
  • Using alternative math methods to save ~8Kb with lights
  • Simpligying mired/kelvin methods
  • Changed web UI checkboxes with pure CSS versions

Deprecated

  • {identifier} place-holder in MQTT base topic

[1.12.6] 2018-05-02

Fixed

  • Check NTP_SUPPORT for sensors (thanks to @mcspr)
  • Fix AM2302 sensor
  • Fix hostname truncated to 20 chars when advertised to DHCP (#774)
  • Decouple Serial object from Terminal, Debug modules (#787)
  • Fix Arilux LC-01 definitions (#797)
  • Do not uppercase hostname in web interface (#799)
  • Ensure scheduler has access to all channels independently of the color mode (#807)

Added

  • Support for IteadStudio Sonoff S31 (#497)
  • Option to ignore daylight saving in scheduler (#783)
  • Report last energy reset datetime in web interface (#784)
  • Added captive portal in AP mode
  • Support for IR toggle mode (thanks to @darshkpatel)
  • Support for IteadStudio Sonoff POW R2 (thanks to @ColinShorts)
  • Support for Luani HVIO (thanks to @wildwiz)
  • Support for Zhilde ZLD-EU55-W power strip (thanks to @wildwiz)
  • Support for RFB_DIRECT Sonoff Bridge EFM8BB1 bypass hack (thanks to @wildwiz)
  • Support for SenseAir S8 CO2 sensor (thanks to @Yonsm)
  • Support for PMS5003T/ST sensors (thanks to @Yonsm)

Changed

  • Updated JustWifi Library
  • Some cleanup in the web interface
  • Refactored configuration files (thanks to @lobradov, @mcspr)
  • Changes pre-commit hook (thanks to @mcspr)

[1.12.5] 2018-04-08

Fixed

  • Fixed expected power calibration (#676)
  • Do not show empty time strings (#691, thanks to @PieBru)
  • Fix load average calculation when system check is disabled (#707)
  • Fixed unstability issues with NtpClientLib using temporary fork (#743)
  • Fixed typos in homeassistant module (thanks to @Cabalist)
  • Fixed default HLW8012 calibration for KMC devices (thanks to @gn0st1c)
  • Fix MQTT query request
  • Fix scheduler debug message
  • Fix NTP offset value

Added

  • Option to change NTP timeout via compile-time setting (#452)
  • Added humidity correction to web UI (#626, tahnks to @ManuelW77)
  • Added support for USA DST calculation (#664)
  • Option to reset energy count (#671)
  • Added Sonoff SV prebuild image (#698, thanks to @akasma74)
  • Check and remove unused config keys (#730)
  • Visual Studio metadata files added to .gitignore (#731, thanks to @gn0st1c)
  • Added default MQTT and SSL settings to web UI (#732, thanks to @mcspr)
  • Added option to the web UI to set the light transition length in milliseconds (#739)
  • Improved testing with Travis (thanks to @lobradov)
  • Change dimmers using schedule (thanks to @wysiwyng)
  • Debug console in web UI (thanks to @lobradov), including command execution
  • Option to reset relays in MQTT disconection (thanks to @a-tom-s)
  • Option to disable system check from custom header (thanks to @phuonglm)
  • Added "board" topic to the heartbeat messages (thanks to @mcspr)
  • Added methods to create hierarchical MQTT JSON responses
  • Added RESET.SAFE command to reboot into safe mode
  • Added SDK and Core versions to the web UI
  • Added revision to web UI (only when built from build.sh)
  • Support for OBI Powerplug Adapter (#622, thanks to @Geitde)
  • Support for Tunbox Powerstrip02 (thanks to @gn0st1c)
  • Support for Lingan SWA1 (thanks to @gn0st1c)
  • Support for Heygo HY02 (thanks to @gn0st1c)
  • Support for Maxcio WUS0025 (thanks to @gn0st1c)
  • Support for Yidian XSSSA05 SWA1 (thanks to @gn0st1c)
  • Support for ArnieX Swifitch (thanks to @LubergAlexander)
  • Support for IKE ESPIKE board
  • Support for AM2320 sensors via I2C (thanks to @gn0st1c)
  • Support for GUVAS12SD sensor (thanks to @gn0st1c)

Changed

  • Removed hostname size limit (#576, #659)
  • Reworked RGBW implementation (thanks to @Skaronator)
  • Several web UI layout changes (thanks to @lobradov & @mcspr)
  • Button MQTT messages will not have the retain flag (thanks to @lobradov)
  • Remove unnecessary code from boot log (thanks to @gn0st1c)
  • Updated logo and favicon, added gitter channel
  • Force reporting power values as 0 if relay is off
  • Using gulp-crass for CSS minification
  • Using WIFI_NONE_SLEEP by default

[1.12.4] 2018-03-05

Fixed

  • Adding a 1ms delay after UDP send to avoid loosing packets (#438)
  • Fixed void return in BMX280 sensor (#489)
  • Fix MQTT keep alive cannot be more than 255 seconds (#515)
  • Do not show scheduler tab in Web UI if build without scheduler support (#527)
  • Fix inline documentation for Sonoff 4CH Pro button modes (#551)
  • Prevent resending messages from rfin in RF Bridge (#561)
  • Fix AnalogSensor description (#601)
  • Fixed missing setting in HASS WS callback (thanks to @mcspr)
  • ECH1560 call sync from tick method
  • Fixed several issues reported by codacy

Added

  • UART to MQTT module (thanks to Albert Weterings, #529)
  • Added option to show HASS configuration code in ESPurna web UI (#616)
  • OTA upgrade via terminal (using 'ota' command, with SSL support)
  • Added I2C scan and clear commands to terminal (only when I2C enabled)
  • Added new relay & wifi led mode (#604)
  • Option to enable/disable web auth from web UI
  • Added "Reset to factory settings" in web UI (thanks to Teo Pavel, #569)
  • Added {magnitude} placeholder to MQTT root topic
  • Option to report energy in kWh and power in kW (#523)
  • Check upgrade file size and signature in web UI
  • Automatically dump info on telnet connection if TERMINAL_SUPPORT is disabled
  • Two different ESPURNA_CORE images for 1MB and 4MB boards, freeing GPIOs (#557)
  • Initial support for PZEM004T sensor (still beta)
  • Support for STM_RELAY board (thanks to Maciej Czerniak)
  • Support for KMC 70011 energy monitor (thanks to Wayne Manion, #598)
  • Support for Wifi Stecker Shuko device (thanks to @Geitde, #622)
  • Support for GizWits Witty Cloud device (thanks to Theonedemon)

Changed

  • BMX280 changes to allow for hot-plug (#353)
  • Increase the initial check interval for NTP (#452)
  • Force turning relays off before turning others on when synced (#491)
  • Publish slampher as light to Home Assistant (#494)
  • Force API to return the target status of the relay (#548)
  • Increasing max number of messages in JSON payload to 20 (#588)
  • Change copy from 'Use colorpicker' to 'Use color'. Better hint. (#590)
  • Completely reworked the RF module to use the same web UI as the RFBridge module to learn new codes (#594)
  • Several spelling and grammar changes by Lee Marlow
  • Always enabled telnet access in ESPURNA_CORE image
  • Updated ESPSoftwareSerial, ESPAsyncTCP and ESPAsyncWebServer libraries

Removed

  • Remove dependency from gulp-util (#493)
  • Removed specific support for Magic Home LED Controller 2.3 (#512)
  • Disabled floating point support when building against Arduino Core 2.4.0 with PIO
  • Removed WiFi distance calculation

[1.12.3] 2018-01-29

Fixed

  • Fix telnet crash due to local reference (#487)

[1.12.2] 2018-01-29

Added

  • Repository migrated over to GitHub
  • Travis CI build test and deploy
  • Pre-commit hook to change README.md file depending on the branch
  • {hostname} and {mac} placeholders for MQTT root topic
  • Added support for timezones with minutes (#265)
  • SSDP support (#282, #423, disabled by default since current implementation is not compatible with Alexa #479)
  • HA auto-discover for multi-relay boards and sensors (#392, #465)
  • Reset the pulse timeout every time an MQTT message is sent with the non-normal payload value (#454)
  • Option to disable schedules without deleting them (#453)
  • Added LED_MODE_STATUS (#458)
  • Support to set on/off state per channel using switches (#457)
  • Added support for MagicHome LED Controller 2.3
  • Alexa message queue (thanks to Qubeck)
  • Secondary Serial RX port for H801 and H802 boards (#386, thanks to Pablo Pousada Rial)
  • Added compatibility with https://github.com/rhx/RF-Bridge-EFM8BB1 to RF Bridge (Thanks to Rene Hexel)
  • Added message queue to RF Bridge
  • Added MAC to mDNS text fields
  • Added wifi.ap command to go into AP mode
  • Added message id on MQTT JSON payloads
  • Added hooks for 3rd party code (custom modules)
  • Local broker to broadcast messages internally
  • Added timestamp to debug output
  • Common I2C interface to abstract backend library (Wire or Brzo I2C)
  • Added espurnaLoopRegister

Fixed

  • Fixed support for 4CH Pro different modes (#333)
  • Fixed several sensor modules to enable hot-unplug-plug (#398)
  • Fixed crash when calling idbSend from an MQTT callback (#410)
  • Checking trailing slash in mqttTopic (#422)
  • Fixed pulse and pulse_ms order in relay_t structure (#424)
  • Use same buffer size across all terminal-realted classes/methods. Set to 128 chars (#477, #478)
  • Fix WiFi scan status in web UI
  • Several code quality fixes (thanks to @lobradov)
  • Fixed error message on first command over telnet

Changed

  • BMX280 sensor module now doesn't depend on third party libraries
  • Changed time management in ntp, mqtt and scheduler modules

Deprecated

  • {identifier} placeholder for MQTT root topic

[1.12.1] 2018-01-14

Added

  • Option to perform a WiFi network scan from web UI
  • Added hostname to web UI side menu (#404)
  • Option to flash multiple devices with ESPurna OTA Manager

Fixed

  • Fix web UI layout so signature does not overlay buttons (#396)
  • Option to disable network scan and allow connecting to hidden SSID (#392, #399)
  • Fix crash caused by a delay in UDP debugging code (#397)
  • Fix memory leak in influxDB module (#410)
  • Fix typos in web UI (#394, #421)

Changed

  • Updated to fauxmoESP 2.4.2
  • Changed default I2C GPIO for Wemos D1 (#420)
  • Some terminal commands have changed. See docs or type "help".

[1.12.0] 2018-01-11

Added

  • Scheduler (contributed by Stefano Cotterli, thank you!, #131)
  • Added "wifi.scan" command to terminal
  • Added ESPurna Switch board support
  • Added support for python3 in memanalyzer and ota scripts (thanks to @Cabalist)
  • Added BSSID, RSSI, channels and distance to web UI status tab
  • Added mDNS name resolving to MQTT, InfluxDB and NoFUSS modules (#129, disabled by default)

Fixed

  • Update FauxmoESP library to 2.4.1, solves dependency issue (#388)
  • Fixed hardware definition in Sonoff Basic and Dual R2 causing wrong relay state on boot (#365)

Changed

  • Removed auto-recursion check in Domoticz module (#379)
  • Rename terminal commands: reset.wifi to wifi.reset, reset.mqtt to mqtt.reset.
  • Update JustWifi library to 1.1.6 (support for multiple SSIDs with the same name)
  • Changed the way Home Assistant module handles disabling auto-discovery (#383)

[1.11.4] 2018-01-09

Fixed

  • Fix bug in RF Bridge when RF code contains the stop byte. Check overflow (#357)
  • Fixed typos in code and wiki (Thanks to @Cabalist)
  • Fix bug in magnitude topic and units (#355)

Added

  • Small core build to allow two-step flashing method for big binaries
  • Thingspeak support (#371, disabled by default)
  • Color synchronization between lights using MQTT (#362)
  • Support for Arilux AL-LC02 (#347)
  • Support for Tarpuna Shield for Wemos D1
  • Build option to disable password checking (#373)
  • Option to report sensor address via MQTT (#377, I2C address, GPIO, Dallas address,...)
  • Added binary size to memanalyzer script
  • Option to specify custom client ID for MQTT connection (#368)
  • Cross-platform ESPurna OTA Manager implemented in python (untested)
  • Terminal command to get or set digital GPIO

Changed

  • Using 2.3.0 for prebuilt binaries
  • Fix delay in DHT sensor
  • Allow MQTT keep alive value of up to 3600s
  • Changed Sonoff 4CH Pro definitions to support built-in interlock mode (#333)

[1.11.3] 2018-01-02

Fixed

  • Fix uninitialized PWM channels bug (#356)

Added

  • Added memory analyzer

[1.11.2] 2017-12-30

Fixed

  • Fix my92xx and pwm references for Arduino IDE (#346)
  • Fix SHT3X I2C sensor magnitude count (#337)
  • Fix timing for DHT11 sensors (#294)
  • Fix overflow in relayParsePayload with long MQTT messages (#344)
  • Fix loading of Dallas and DHT sensors for Sonoff TH images (#352)
  • Subscribe to Domoticz MQTT topics only if Domotic< is enabled

Added

  • Added option to change MQTT retain flag, QoS and keepalive time from webUI (#321)
  • Added LED modes "always off" and "always on" (#348)
  • Defined new ESPurna switch (no HLW8012 support & touch button ready)

Changed

  • Stop requiring definition of boards in migrate module

[1.11.1] 2017-12-29

Fixed

  • Fixed relay status on reboot

Added

  • Added support for Arilux AL-LC01 and AL-LC11
  • Added support for BH1750 luminosity sensor
  • Added automatic memory size identification in ota_flash script

[1.11.0] 2017-12-28

Fixed

  • Fixed Arduino IDE compilation issues (#330)
  • Fixed issues with IE
  • Fixed websocket auth issue with Safari (temporary)
  • Fixed MQTT group sync when different switches share same group
  • Fixed casting issue in buttonStore (#327)
  • Fixed crash in InfluxDB initial heartbeat (#318)
  • Fixed LED logic for ESPurna H08 board

Added

  • New sensors module (major change)
    • Existing sensor have been migrated: EMON*, ECH1560, V9261F, HLW8012, DHT, DALLAS, ANALOG, DIGITAL and EVENTS
    • New sensor have bee added: BMP280/BME280, EMON over ADS1115, MHZ19, PMSX003 (thanks to Òscar Rovira), SHT3X over I2C and SI7021
  • Option to change boot and pulse modes per relay from the web UI
  • Option to select sensor read interval and report interval from web UI
  • Itead RF Bridge
    • Match MQTT RFOUT codes to relays
    • Force RFBridge to send messages even if switch is already in requested state (#324)
    • Implemented RFbridge message queue asynchronously
  • Added option to load config via HTTP POST & reset (#335)
  • Added option to define behaviour of the first LED between WIFI, MQTT, FIND-ME (#317)
  • Added HTML linter to gulp builder
  • Added Help command on terminal (#338)
  • Added preliminary support for SSDP (untested, disabled by default) (#282)
  • Reporting NTP datetime on MQTT heartbeat (thanks to Eldon R. Brown)
  • Added version tracking and migration code
  • I2C and GPIO locking features
  • Changed default button action for touch button devices (TOUCH and T1) (#327)
  • Generic 8 channel board (#336)

Changed

  • Added more sensor data filters (Max, MobileAverage)
  • Changed max pulse time to 1h (#316)
  • Renamed "reset" to "reboot" for clarity (#315)
  • UI refactor
  • Change apiRegister signature

[1.10.1] 2017-12-05

Fixed

  • Fix Sonoff RFBridge learn message from web UI (#287)
  • Fix unstability in "one and just one" sync mode (#290)
  • Fix unnecessary inclusion of my92xx library (#293)
  • Limit the MQTT queue to 10 messages when "Use JSON payload" enabled (#296)
  • Fix Sonoff RFBridge OFF button toggling switch (#303)
  • Allow defining only ON or OFF codes in Sonoff RFBridge (#304)
  • Disabled terminal support for Sonoff Dual (#310)

Added

  • Support for SI7021-based sensor by Itead Studio compatible with Sonoff TH (#216)
  • Support for Sonoff Dual R2 (#286)
  • MQTT group topics (sync two or more switches from different devices, #300)
  • Color transitions (enabled by default, can be disabled from web UI)
  • Option to disable MQTT support at build time

Changed

  • Decreased PWM frequency for dimmer lights
  • Changed password policy (#297)

[1.10.0] 2017-11-26

Fixed

  • Temperatures with 1 decimal resolution
  • Issues with Sonoff B1 due to bad driver management (using my92xx library now)
  • Avoid recursive messages on Domoticz (#272)
  • Fixed Sonoff T1 configuration
  • Simplify and fix web auth (#284)
  • Fix Embedis custom parser

Added

  • Added option to define a temperature correction factor (thanks to Pawel Raszewski)
  • Option to disable system check on build time
  • Power saving features (loopDelay and wifi sleep)
  • Added Sonoff TH build environment
  • Send Home Assistant auto discover messages on connect (#279)
  • Implemented Home Assistant availability topic (#280)
  • Update time, uptime and heap on webUI every heartbeat
  • Support for LLMNR and NetBIOS (#282)
  • Added I2C clean bus code
  • Added realm to auth challenge

Changed

  • Changed default hostname to "ESPURNA_XXXXXX"
  • Binaries built against stable core (~40Kb less, #274)
  • Enabled TERMINAL_SUPPORT for Sonoff Dual (only available via TELNET)
  • Dinamically resize debug strings (now messages are not cropped)
  • MQTT: unsubscribe to '#' before subscribing
  • Updated ESPAsyncWebServer and ESPAsyncTCP libraries
  • Removed InfluxDB support by default
  • Using stock slider in webUI to reduce size
  • Unify DHT and DS18B20 code, show NOT CONNECTED on webUI

[1.9.9] 2017-11-09

Fixed

  • Fixed bug in MY9291-based light bulbs at full brightness

Added

  • RFBridge: toggle when RF codes for ON and OFF are the same (#270)
  • Support for HSV color schema (MQTT, API and webUI via a selector)

Changed

  • "COLOR" entry point deprecated, use "RGB" instead (MQTT and API, ex. topic "light/rgb/set" instead of "light/color/set")

[1.9.8] 2017-11-08

Fixed

  • Removed dimmer lights flicker when saving to EEPROM (#191)
  • Fixed low brightness in dimmer lights (#157)
  • Fixed blank fields in energy (#258, #259)
  • Fixed support for Arilux AL-LC06
  • Updated fauxmoESP library with support for GetBinaryState actions

Added

  • Support for IR remotes
  • Option to select power read and report interval from webUI
  • Option to report real-time values in API, configurable via webUI
  • Support for ESPurna-H Board v0.8
  • Support for Arilux E27 light bulb (untested)
  • Support for YJZK 2-gang switch

Changed

[1.9.7] 2017-10-25

Fixed

  • Fix Alexa interface switching on all lights (#256)

[1.9.6] 2017-10-23

Fixed

  • Fix power report in Domoticz (#236)
  • Fix Sonoff POW in AP mode (#241)
  • Fix Home Automation auto-discovery (support for single relay switches and RGB lights, #235)
  • Check WS authentication only on start event

Added

  • Support for 2.4.0 RC2 Arduino Core that fixes KRACK vulnerablity (pre-built images are compiled against this, #242)
  • Support for ManCaveMade ESPLive board (thanks to Michael A. Cox)
  • Support for InterMIT Tech QuinLED 2.6 (thanks to Colin Shorts)
  • Support for Magic Home LED Controller 2.0 (thanks to users @gimi87 and @soif, #231)
  • Support for Arilux AL-LC06 (thanks to Martijn Kruissen)
  • Support for Xenon SM-PW702U Wifi boards (thanks to Joshua Harden, #212)
  • Support for Authometion LYT8266 (testing, thanks to Joe Blellik, #213)
  • Support for an external button for D1 Mini boards (thanks to user @PieBru, #239)
  • Option to query relay status via MQTT or WS (thanks to Wesley Tuzza)
  • Automatically install dependencies for web interface builder (thanks to Hermann Kraus)
  • Support for HSV and IR for Magic Home LED Controller (optional, disabled by default, thanks to Wesley Tuzza)
  • Added option to report DS18B20 temperatures based on changes (thanks to Michael A. Cox)
  • Safer buffer handling for websocket data (thanks to Hermann Kraus & Björn Bergman)
  • Updates HL8012 library with energy counting support (thanks to Hermann Kraus)
  • Added option to disable light color persistence to avoid flickering (#191)
  • Option to enable TELNET in STA mode from web UI (#203)

Changed

  • Changed default MQTT base topic to "{identifier}" (no leading slashes, #208)
  • Prevent reconnecting when in AP mode if a web session or a telnet session is active (#244)
  • Web UI checks for pending changes before reset/reconnect options (#226)
  • Increase WIFI connect timeout and reconnect interval

[1.9.5] 2017-09-28

Fixed

  • Revert to JustWifi 1.1.4 (#228)

[1.9.4] 2017-09-22

Added

  • Added ESPurna specific mDNS text registers (app_name, app_version, device_name)
  • Crash dump info is stored in EEPROM and retrieved via terminal ("crash" command)
  • Support for Huacanxing H802
  • Support for powermeters based on V9261F IC
  • Support for powermeters based on ECH1560 IC (beta, untested)

Changed

  • Changed behaviour on MQTT connection failure (#215)
  • Removed boot delay
  • Refactor power modules
  • Updated JustWifi library

Fixed

  • Set all esp8285 devices to use esp01_1m (#210, #225)
  • Removed wifi gain option since it prevents some devices to connect (#204)

[1.9.3] 2017-09-04

Added

Changed

  • Updated fauxmoESP library to 2.2.0

Fixed

  • Fix HLW8012 calibration (#194)
  • Fix telnet dropping connection
  • Fix WiFiSecureClient connection with PubSubClient (#64)

[1.9.2] 2017-08-31

Added

  • System stability check (turns off everything except WIFI AP, OTA and telnet if there is a boot crash loop) (#196)
  • Telnet support (enabled by default only on AP interface)
  • Option to set WiFi gain from web UI
  • Option to disable MQTT from web UI
  • MQTT autodiscover, with the option to autoconnect if no broker defined
  • Home Assistant MQTT autodiscover feature
  • List enabled modules in INIT debug info
  • Counter module (counts and reports transitions in a digital pin)

Changed

  • Updated NoFUSS support
  • Web UI documentation changes
  • Changes in terminal commands ("reconnect" is now "reset.wifi", also new commands added)

Fixed

  • Crash in settings saving (#190) and fixed UDP debug conditional build clauses

[1.9.1] 2017-08-27

Added

  • Support to build without NTP support
  • Added current time, uptime, free heap, firmware size and free space to web interface

Changed

  • Changed settings keys for Itead Sonoff RF Bridge
  • Disable Domoticz by default

Fixed

  • Fixed build flags for DHT and DS18B20 in platformio.ini file
  • Fixed Itead Sonoff B1 by updating the my9291 library
  • Fixed light status on boot (#157)
  • Fixed CSS bug cause by a bad merge

[1.9.0] 2017-08-25

Added

  • Support for IteadStudio BN-SZ01 Ceiling Light (#132)
  • Support for IteadStudio Sonoff RF Bridge (#173)
  • Support for IteadStudio Sonoff 4CH Pro (#174)
  • Support for IteadStudio Sonoff B1
  • Support for IteadStudio Sonoff LED
  • Support for IteadStudio Sonoff T1 wall switches (1, 2 and 4 channels)
  • Support for WiOn 50055 WiFi Wall Outlet & Tap
  • Support for EXS WiFi Relay v3.1 (and other future latching relay boards) (#152)
  • TLS/SSL support for MQTT (caution: eats a lot of memory, do not use with web interface) (#64)
  • Add support for delayed ON/OFF switches (#123, #161, #188)
  • Added ON and OFF actions for button events (previously only TOGGLE available) (#182)
  • Sliders in web interface to control dimmer channels independently (also for brightness)
  • Debug info about MQTT disconnect reason

Changed

  • MQTT setters ending with "/set" by default
  • Using DOUT flash mode on all devices (#167)
  • Longer timeout for WiFi connection (better chances for Sonoff Basic to connect)
  • Changed MQTT topics for light devices (COLOR, BRIGHTNESS, MIRED, KELVIN, CHANNEL) (#144)
  • Changed the way light devices are defined (see LIGHT_PROVIDER_DIMMER)
  • Allow to disable color picker in web interface
  • API returns processed values for HLW8012 sensor (not raw values anymore) (#176)
  • Major refactoring of settings

Fixed

[1.8.3] 2017-07-23

Added

  • Issue #85 and #90. Option to report MQTT messages with JSON payloads
  • Issue #170. Updated DebouceEvent library to allow disabling double click and get faster click responses
  • Using memory layout with no SPIFFS for 1Mb devices

Changed

  • Rename settings s/POW/HLW8012/
  • Return times in ISO8601 format

Fixed

  • Issue #168. Added H801 to arduino.h file
  • Issue #171. Fix corrupted will message

[1.8.2] 2017-07-16

Added

  • InfluxDB support via HTTP API
  • Added custom reset reason to debug log
  • Enable WIFI debug on hardware reset (button long click)

Changed

  • Issue #159. Allow decimals in relay pulse interval
  • Updated HLW8012 library

Fixed

  • Issue #148. Fix bug in conditional compilation check
  • Issue #149. Using different pulse counters for each relay (thanks to Lauris Ieviņš)
  • Issue #141. Limit relay pulse interval to 60s
  • Fixed units for apparent & reactive power (thanks to Lauris Ieviņš)
  • Fixed mDNS setup when using custom HTTP port for web interface

[1.8.1] 2017-05-22

Fixed

  • Issue #140. Fix no relay control bug in Sonoff Dual

[1.8.0] 2017-05-21

Added

  • Added gamma correction to RGB strips. Thanks to Chris Ward.
  • Added support for Huacanxing H801 WiFi LED Controller. Thanks to Minh Phuong Ly.
  • Issue #138. Added NTP configuration from web interface
  • Issue #128. Report color when booting and in heartbeat stream.
  • Issue #126. Show NTP status in web interface.
  • Added filter limits on POW readings.
  • Added color temperature to RGB calculation. Thanks to Sacha Telgenhof.
  • Issue #120. Added relay flood protection. Thanks to Izik Dubnov.
  • Support for "#RRGGBB", "RRR,GGG,BBB" and "WWW" color formats.
  • Issue #117. Added build date & time to web interface.

Fixed

  • Fix MQTT_RELAY board conifugration. Thanks to Denis French.
  • Issue #125. Fix bug in relay status reading from EEPROM
  • Issue #127. Fix button action in DUAL.
  • Fix bug in Sonoff POW current reading. Thanks to Emmanuel Tatto.
  • Minimizing my9291 flickering when booting.
  • Fix conditional flags in hardware.ino to support Arduino IDE.

[1.7.1] 2017-03-28

Fixed

  • Issue #113. Fix restoring color from EEPROM upon reboot
  • Issue #113. Fix bug in API handlers

[1.7.0] 2017-03-27

Added

  • Web interface embedded in firmware image by default
  • Upload firmware image from web interface
  • Added API entry point to change light color
  • Added generic analog sensor. Thanks to Francesco Boscarino
  • Report RSSI value in debug console and MQTT status messages
  • Added support for Magic Home LED Controller
  • Added support for ESPurna-H Board (based on HLW8012)
  • Added forward compatible code for v2.0

Changed

  • Added ellipsis (...) in debug messages longer than 80 characters
  • Changed topic constants in code
  • Prevent the SDK from saving WiFi configuration to flash

Fixed

  • Issue #113. Fix light bulb state to OFF in library prevented the bulb from turning on
  • Issue #58. Added code to handle spurious readings
  • Fix bug in HLW8012 calibration current parameter casting to int instead of float
  • Issue #115. Removed local declaration of _mqttForward variable. Thanks to Paweł Fiedor
  • Fix MQTT will topic. Thanks to Asbjorn Tronhus

[1.6.9] 2017-03-12

Added

  • Two stage read for DS18B20 devices. Thanks to Izik Dubnov.
  • Option to report the relay status via MQTT periodically
  • Terminal commands to change relay status an light color
  • Added debug via UDP (disabled by default)
  • Moved debug strings to PROGMEM. ~1.5KByes memory freed
  • Avoid broadcasting websocket messages if no clients connected

Fixed

  • Fixing use after free bug that leads to corrupted auth credentials. Thanks to David Guillen

[1.6.8] 2017-03-01

Added

  • Issue #85. Heartbeat reports now free heap, uptime and VCC every 5 minutes

Changed

  • Wait two minutes instead of one in AP mode before trying to reconnect to the router
  • Issue #92. Debug log enabled by default in Arduino IDE
  • Issue #91. Using AsyncMqttClient as default MQTT client again

Fixed

  • Report data from all sensors via websocket even if no MQTT connection
  • Issue #92. Fix unknown reference in Arduino IDE
  • Split data.h contents into 1k lines, otherwise Arduino IDE chokes on them
  • Discard empty MQTT topic while subscribing

[1.6.7] 2017-02-25

Added

  • Support for OpenLight / AI-Light by AI-Thinker based on MY9291 LED driver
  • Issue #87. Factory reset when physical button pressed for >10 seconds

[1.6.6] 2017-02-23

Fixed

  • Issue #82. Fix critical bug on Sonoff Dual

[1.6.5] 2017-02-22

Added

  • Option to backup and restore settings from the web interface
  • Footer in the web interface

Changed

  • Using PubSubClient as MQTT client by default (please read the documentation)
  • Double & long clicks do nothing except for the first defined button

Fixed

  • Issue #79. Fix bug in WiFi led notification & MQTT connectivity (using PubSubClient)
  • Issue #73. Fix bug when building without Domoticz support
  • Fix Gulp tasks dependencies

[1.6.4] 2017-02-20

Added

  • Option to embed the web interface in the firmware, disabled by default
  • Change relay status with a GET request (browser friendly)
  • Support for PROGMEM debug messages (only wifi module has been changed)
  • Option to disable mDNS, enabled by default
  • Show current web server port in debug log
  • Issue #75. Link relays to LEDs
  • Issue #76. Using http://espurna.local when in AP mode

Changed

  • Images and favicon is now embedded in the HTML
  • Authentication challenge only in /auth request. All static contents are un-authenticated
  • HTTP response code when out of websocket slots changed from 423 to 429

Fixed

  • Memory leak in MQTT connection method
  • Wait 60 seconds before retrying to connect when in AP mode
  • Issue #24 & #74. Update ESPAsyncTCP and ESPAsyncWebServer to latest GIT version that supports MSS defragmenting
  • Issue #73. Fixes for windows machines

Removed

  • Captive portal removed, mDNS resolution for AP mode too

[1.6.3] 2017-02-15

Added

  • Issue #69. Temperature unit configuration from the web interface
  • Issue #55. WebServer port configurable from the web interface, defaults to 80
  • Expand network configuration when adding a new network

Changed

  • Merged web contents except images in a single compressed file for reliability
  • Update support for Itead Motor Clockwise/Anticlockwise board
  • Scan for strongest network only if more than 1 network configured

Fixed

  • Issue #71. Added default values for netmask and DNS in web configuration
  • Fixed Itead 1CH self-locking/inching board definition
  • Fixed PlatformIO environments for ESP8285 boards (4CH and Touch)

[1.6.2] 2017-02-10

Fixed

  • Check if there is an MQTT broker defined before the MQTT_MAX_TRIES check

[1.6.1] 2017-02-10

Added

  • Added support for Jorge Garcia's Wifi+Relay Board Kit
  • Reporting current and energy incrementals to a separate counters in Domoticz (thanks to Toni Arte)
  • Force WiFi reconnect after MQTT_MAX_TRIES fails trying to connect to MQTT broker

[1.6.0] 2017-02-05

Added

  • Added support for toggle switches
  • Allow reset the board via an MQTT message
  • Allow reset the board via an RPC (HTTP) message
  • Added support for ADC121 I2C for current monitoring (Check http://tinkerman.cat/power-monitoring-sonoff-th-adc121/)
  • Reporting voltage to Domoticz (only HLW8012)
  • Map button events to actions (toggle relay, AP mode, reset, pulse mode)

Changed

  • Reporting energy incrementals (Domoticz, MQTT)

Removed

  • Removed current monitor bypass when relay is OFF
  • Removed energy API entry point

[1.5.4] 2017-02-03

Fixed

  • Issue #50. Fix type bug in window variable when calculating energy for HLW8012 devices (Sonoff POW)

[1.5.3] 2017-02-02

Fixed

  • Issue #50 and #54. Fixed domoticz MQTT message format

Added

  • Energy calculation and aggregation. API entry points and MQTT messages.

[1.5.2] 2017-01-29

Fixed

  • Fix bug in emon topic payload

[1.5.1] 2017-01-28

Added

  • OpenEnergyMonitor WiFi MQTT Relay / Thermostat support (thanks to Denis French)

Fixed

  • NTP connection refresh upon wifi connection
  • Filesystem image build using local gulp installation

[1.5.0] 2017-01-21

Added

  • Pulse mode. Allows to define a pulse time after which the relay will switch back
  • API entry points for sensor data (power, current, voltage, temperature and humidity)
  • Export sensor data to Domoticz (power, current, voltage, temperature and humidity)
  • Configurable (in code) mapping between buttons and relays
  • MQTT messages for button events
  • Added support for Itead Studio 1CH inching/self locking smart switch board
  • Added support for Jan Goedeke Wifi Relay boards (both NC and NO versions)
  • Notify OTA updates to websocket clients, automatically reload page
  • Support for pulse mode notification LED and button
  • Revert relay state mode on boot (thanks to Minh Phuong Ly)

Fixed

  • MQTT will topic
  • Crash with HLW812 interrupts while trying to create a WIFI connection
  • Issue #20 Better inline documentation for Alexa and Domoticz default settings
  • Issue #39 Fixed autoconnect issue with static IP (fixed in JustWifi library)
  • Issue #41 Added password requirements to initial password change page

Changed

  • Changed LED pattern for WIFI notifications (shorter pulses)

[1.4.4] 2017-01-13

Added

  • Adding current, voltage, apparent and reactive power reports to Sonoff POW (Web & MQTT)

Fixed

  • Issue #35 Fixed frequent MQTT connection drops after WIFI reconnect
  • Defer wifi disconnection from web interface to allow request to return

Changed

  • Move all Arduino IDE configuration values to their own file
  • Using latest HLW8012 library in interrupt mode

[1.4.3] 2017-01-11

Fixed

  • Issue #6 Using forked Time library to prevent conflict with Arduino Core for ESP8266 time.h file in windows machines

[1.4.2] 2017-01-09

Added

  • Support for inverse logic relays

Fixed

  • Issue #31. Fixed error in relay identification from MQTT messages

[1.4.1] 2017-01-05

Added

  • Alexa support by default on all devices
  • Added support for Wemos D1 Mini board with official Relay Shield

Fixed

  • Multi-packet websocket frames

[1.4.0] 2016-12-31

Added

Fixed

  • Issue #16. Enforce minimum password strength in web interface

Changed

  • Using default client_id provided by AsyncMqttClient
  • Allow up to 5 different WIFI networks

Removed

  • File system version file

[1.3.1] 2016-12-31

Fixed

  • data_dir fix for PlatformIO

[1.3.0] 2016-12-30

Changed

  • Arduino IDE support (changes in the folder structure and documentation)

[1.2.0] 2016-12-27

Added

  • Force password changing if it's the default one
  • Added Last-Modified header to static contents
  • Added DNS captive portal for AP mode
  • Added support for Sonoff 4CH
  • Added support for WorkChoice ecoPlug (ECOPLUG). Thanks to David Myers
  • Added support for Sonoff SV
  • Added support for Sonoff Touch
  • Comment out hardware selection in hardware.h if using Arduino IDE
  • Added support for MQTT get/set suffixes (/status, /set, ...)
  • Added support for LED notifications via MQTT
  • Added EEPROM check commands to terminal interface

Changed

  • Using unreleased AsyncMqttClient with stability improvements
  • Better decoupling between MQTT and relays/websockets
  • Skipping retained MQTT messages (configurable)

Fixed

  • Issue #11 Compile error when building sonoff-dual-debug
  • Issue #14 MQTT Connection with Username an Password not working
  • Issue #17 Moved static variable 'pending' to class variable

[1.1.0] 2016-12-06

Added

  • Added support for DS18B20 temperature sensor. Thanks to Francesco Boscarino
  • Added reset command from console
  • Added support for multirelay boards like Sonoff DUAL or Electrodragon ESP Relay Board

Changed

  • Not using espressif8266_stage in default environment
  • Relay MQTT topics
  • API entry points

Removed

  • Old non protected API

[1.0.3] 2016-11-29

Added

  • WeMo emulation through the fauxmoESP library (control your switch from Alexa!)
  • REST API for relay management
  • Better dependency definitions in platformio.ini
  • Option to define inverse logic to on-board LED
  • Built data folder included in repo

Changed

  • Using non-interrupt driven mode for HLW8012
  • Better documentation
  • Small changes to web interface
  • Same admin password for web, OTA and WIFI AP mode

Fixed

  • Prevent fauxmoESP to be compiled by default

Removed

  • Removed ESPurna board to its own repo

[1.0.1] 2016-11-13

Added

  • Basic authentication and CSRF to websocket requests

[1.0.0] 2016-11-13

Added

  • Using ESPAsyncWebServer (for web & websockets) and AsyncMqttClient

[0.9.9] 2016-11-12

Added

  • Preliminary support for Sonoff POW
  • Replace AJAX requests with websockets
  • Using sprites for images
  • Hostname can be changed
  • Added initial relay state mode
  • Reconnect and reset buttons on web interface

Changed

  • Changed long click to reset and double click to AP mode
  • Using officially supported platformio.ini file by default

Fixed

[0.9.8] 2016-10-06

Added

  • Using PureCMS for the web interface
  • Using gulp to build the filesystem files
  • Using Embedis for configuration

Changed

  • Updated JustWifi library
  • Web interface changes
  • Using custom platformio.ini file
  • Loads of changes in modules
  • Added DEBUG_MSG

Fixed

  • Clean gulp builder script

[0.9.7] 2016-08-28

Changed

  • Moving wifi management to library (JustWifi)
  • Split code into modules

[0.9.6] 2016-08-12

Added

  • Added heartbeat, version and fsversion MQTT messages

Changed

  • GZip 3rd party contents

[0.9.5] 2016-07-31

  • Initial stable version