nxp-t1024.config

# NXP QorIQ T1024 (2 core)

ARCH=PPC
TARGET=nxp_t1024
SIGN?=ECC384
HASH?=SHA384
IMAGE_HEADER_SIZE?=512
DEBUG?=0
DEBUG_UART?=1
VTOR?=1
CORTEX_M0?=0
NO_ASM?=0
EXT_FLASH?=0
SPI_FLASH?=0
NO_XIP?=0
UART_FLASH?=0
ALLOW_DOWNGRADE?=0
NVM_FLASH_WRITEONCE?=0
WOLFBOOT_VERSION?=0
NO_MPU?=0
SPMATH?=0
SPMATHALL?=1
RAM_CODE?=0
DUALBANK_SWAP?=0
WOLFTPM?=0
ELF?=1
DEBUG_ELF=0

# NOR Base Address
ARCH_FLASH_OFFSET?=0xEC000000

# Flash Sector Size (128KB)
WOLFBOOT_SECTOR_SIZE=0x20000

# wolfBoot start address
WOLFBOOT_ORIGIN=0xEFF40000
# wolfBoot partition size (custom)
BOOTLOADER_PARTITION_SIZE=0xC0000

# Application Partition Size (15MB)
WOLFBOOT_PARTITION_SIZE?=0xF00000
# Location in Flash for Application Partition
WOLFBOOT_PARTITION_BOOT_ADDRESS?=0xEE000000
# Load Partition to RAM Address
WOLFBOOT_LOAD_ADDRESS?=0x70000000

# Location in Flash for Update Partition
WOLFBOOT_PARTITION_UPDATE_ADDRESS?=0xEEF00000

# Location of temporary sector used during updates
WOLFBOOT_PARTITION_SWAP_ADDRESS?=0xEC0F0000

# Stage 1 loader settings (16KB)
WOLFBOOT_STAGE1_SIZE=0x4000
# Location in Flash for stage 1 loader (XIP from boot ROM)
WOLFBOOT_STAGE1_FLASH_ADDR=0xEFFFC000
# Address in RAM to load wolfBoot (end of DDR at 2GB-1MB)
WOLFBOOT_STAGE1_LOAD_ADDR=0x7FF00000

# DTS (Device Tree)
WOLFBOOT_DTS_BOOT_ADDRESS?=0xEC800000
WOLFBOOT_DTS_UPDATE_ADDRESS?=0xEC820000
# DTS Load to RAM Address
WOLFBOOT_LOAD_DTS_ADDRESS?=0x7F100000

# Load to RAM before hash and verify
CFLAGS_EXTRA+=-DWOLFBOOT_USE_RAMBOOT