vsftpd-ssl-old.conf

# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES

# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES

# Allow anonymous FTP? (Disabled by default)
anonymous_enable=NO

# Uncomment this to allow local users to log in.
local_enable=YES

# Uncomment this to enable any form of FTP write command.
write_enable=YES

# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022

# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES

# If enabled, vsftpd will display directory listings with the time
# in  your  local  time  zone.  The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES

# Activate logging of uploads/downloads.
#xferlog_enable=YES

# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES

# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log

# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES

# You may change the default value for timing out an idle session.
idle_session_timeout=30

# You may change the default value for timing out a data connection.
data_connection_timeout=30

# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure

# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES

# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES

# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.

# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails

# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
#chroot_local_user=YES

# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)

chroot_local_user=YES
chroot_list_enable=NO
allow_writeable_chroot=YES

# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/data/ftp-users

#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list

# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES

# Customization

# Some of vsftpd's settings don't fit the filesystem layout by
# default.

# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd

# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
#rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
# This option specifies the location of the RSA key to use for SSL
# encrypted connections.
#rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key

ssl_enable=YES
allow_anon_ssl=NO
force_local_data_ssl=NO
force_local_logins_ssl=NO
#ssl_tlsv1_1=YES
#ssl_tlsv1_2=YES
#ssl_tlsv1=NO
#ssl_sslv2=NO
#ssl_sslv3=NO
require_ssl_reuse=YES
ssl_ciphers=HIGH
rsa_cert_file=/etc/ssl/certs/vsftpd.crt
rsa_private_key_file=/etc/ssl/private/vsftpd.key

pasv_enable=YES
pasv_address=
pasv_min_port=40000
pasv_max_port=40009
port_enable=YES

# Change ftp port from default 21
#listen_port=21

# Set a custom location for vsftpd log file
vsftpd_log_file=/var/log/vsftpd.log

# Set up better log output
xferlog_enable=YES
xferlog_std_format=NO
dual_log_enable=YES
log_ftp_protocol=YES

seccomp_sandbox=NO