energyic_UART.h

/* ATM90E26 Energy Monitor Demo Application

    The MIT License (MIT)

  Copyright (c) 2016 whatnick and Ryzee

  Permission is hereby granted, free of charge, to any person obtaining a copy
  of this software and associated documentation files (the "Software"), to deal
  in the Software without restriction, including without limitation the rights
  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  copies of the Software, and to permit persons to whom the Software is
  furnished to do so, subject to the following conditions:

  The above copyright notice and this permission notice shall be included in all
  copies or substantial portions of the Software.

  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  SOFTWARE.
*/

#ifndef __ATM90E26_UART_H__
#define __ATM90E26_UART_H__

#include <Arduino.h>

#define SoftReset 0x00 // Software Reset
#define SysStatus 0x01 // System Status
#define FuncEn 0x02    // Function Enable
#define SagTh 0x03     // Voltage Sag Threshold
#define SmallPMod 0x04 // Small-Power Mode
#define LastData 0x06  // Last Read/Write SPI/UART Value
#define LSB 0x08       // RMS/Power 16-bit LSB
#define CalStart 0x20  // Calibration Start Command
#define PLconstH 0x21  // High Word of PL_Constant
#define PLconstL 0x22  // Low Word of PL_Constant
#define Lgain 0x23     // L Line Calibration Gain
#define Lphi 0x24      // L Line Calibration Angle
#define Ngain 0x25     // N Line Calibration Gain
#define Nphi 0x26      // N Line Calibration Angle
#define PStartTh 0x27  // Active Startup Power Threshold
#define PNolTh 0x28    // Active No-Load Power Threshold
#define QStartTh 0x29  // Reactive Startup Power Threshold
#define QNolTh 0x2A    // Reactive No-Load Power Threshold
#define MMode 0x2B     // Metering Mode Configuration
#define CSOne 0x2C     // Checksum 1
#define AdjStart 0x30  // Measurement Calibration Start Command
#define Ugain 0x31     // Voltage rms Gain
#define IgainL 0x32    // L Line Current rms Gain
#define IgainN 0x33    // N Line Current rms Gain
#define Uoffset 0x34   // Voltage Offset
#define IoffsetL 0x35  // L Line Current Offset
#define IoffsetN 0x36  // N Line Current Offse
#define PoffsetL 0x37  // L Line Active Power Offset
#define QoffsetL 0x38  // L Line Reactive Power Offset
#define PoffsetN 0x39  // N Line Active Power Offset
#define QoffsetN 0x3A  // N Line Reactive Power Offset
#define CSTwo 0x3B     // Checksum 2
#define APenergy 0x40  // Forward Active Energy
#define ANenergy 0x41  // Reverse Active Energy
#define ATenergy 0x42  // Absolute Active Energy
#define RPenergy 0x43  // Forward (Inductive) Reactive Energy
#define Rnenerg 0x44   // Reverse (Capacitive) Reactive Energy
#define Rtenergy 0x45  // Absolute Reactive Energy
#define EnStatus 0x46  // Metering Status
#define Irms 0x48      // L Line Current rms
#define Urms 0x49      // Voltage rms
#define Pmean 0x4A     // L Line Mean Active Power
#define Qmean 0x4B     // L Line Mean Reactive Power
#define Freq 0x4C      // Voltage Frequency
#define PowerF 0x4D    // L Line Power Factor
#define Pangle 0x4E    // Phase Angle between Voltage and L Line Current
#define Smean 0x4F     // L Line Mean Apparent Power
#define IrmsTwo 0x68   // N Line Current rms
#define PmeanTwo 0x6A  // N Line Mean Active Power
#define QmeanTwo 0x6B  // N Line Mean Reactive Power
#define PowerFTwo 0x6D // N Line Power Factor
#define PangleTwo 0x6E // Phase Angle between Voltage and N Line Current
#define SmeanTwo 0x6F  // N Line Mean Apparent Power

class ATM90E26_UART {
public:
  ATM90E26_UART(Stream *UART);
  double GetLineVoltage();
  double GetLineCurrent();
  double GetActivePower();
  double GetFrequency();
  double GetPowerFactor();
  double GetImportEnergy();
  double GetExportEnergy();
  void InitEnergyIC();
  unsigned short GetSysStatus();
  unsigned short GetMeterStatus();

private:
  unsigned short CommEnergyIC(unsigned char RW, unsigned char address,
                              unsigned short val);
  Stream *ATM_UART;
};

#endif