New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Schematic vs PCB error #2

Open

ltwin8 opened this issue Jan 26, 2024 · 0 comments

ltwin8 commented Jan 26, 2024

Could you please clarify which PCB version is the one in the gerbers?

I saw for example that https://github.com/westonb/little-bee-B1/blob/main/doc/images/little_bee_v4_circuit.jpg seems to be V4 (?) and switching the main current to the DCDC and has a PPTC before and a Ferrite after the switch, while in the schematic the switch is only used for the EN line.

I did not look further into it because i thought maybe its just an upload issue?

I really like the project and look forward to give it a try.

by the way, which Ferrite ring do i have to use? maybe mouser or digikey? and what geometry of the cut?

best regards

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment