Is this downloading in fast mode itended ? it happens every time. #196

rbumm · 2023-10-15T00:58:03Z

  0%|          | 0/8 [00:00<?, ?it/s]
 12%|#2        | 1/8 [00:01<00:07,  1.13s/it]
100%|##########| 8/8 [00:01<00:00,  6.85it/s]

````
Best
Rudolf

The text was updated successfully, but these errors were encountered:

wasserth · 2023-10-16T10:56:17Z

For me it does only download weights once. On consecutive calls it does not happen.
Can you paste the entire output here?
Do you run it from the command line or from within slicer?

rbumm · 2023-10-16T12:51:48Z

This is the full output running TotalSegmentator from 3D Slicer without FAST mode.
0% to 100 % several times, looks like a download, and it happens every time again when I restart the procedure.

Processing started
Writing input file to C:/Users/Rudolf/AppData/Local/Temp/Slicer/__SlicerTemp__2023-10-16_11+33+23.285/total-segmentator-input.nii
Creating segmentations with TotalSegmentator AI...
Total Segmentator arguments: ['-i', 'C:/Users/Rudolf/AppData/Local/Temp/Slicer/__SlicerTemp__2023-10-16_11+33+23.285/total-segmentator-input.nii', '-o', 'C:/Users/Rudolf/AppData/Local/Temp/Slicer/__SlicerTemp__2023-10-16_11+33+23.285/segmentation', '--ml', '--task', 'total']
C:\Users\Rudolf\AppData\Local\slicer.org\Slicer 5.4.0_2\lib\Python\Lib\site-packages\requests\__init__.py:102: RequestsDependencyWarning: urllib3 (1.26.17) or chardet (5.1.0)/charset_normalizer (2.0.12) doesn't match a supported version!
  warnings.warn("urllib3 ({}) or chardet ({})/charset_normalizer ({}) doesn't match a supported "
C:\Users\Rudolf\AppData\Local\slicer.org\Slicer 5.4.0_2\lib\Python\Lib\site-packages\requests\__init__.py:102: RequestsDependencyWarning: urllib3 (1.26.17) or chardet (5.1.0)/charset_normalizer (2.0.12) doesn't match a supported version!
  warnings.warn("urllib3 ({}) or chardet ({})/charset_normalizer ({}) doesn't match a supported "

  0%|          | 0/48 [00:00<?, ?it/s]
  2%|2         | 1/48 [00:05<04:19,  5.51s/it]
 10%|#         | 5/48 [00:05<00:36,  1.17it/s]
 15%|#4        | 7/48 [00:06<00:29,  1.40it/s]
 17%|#6        | 8/48 [00:07<00:26,  1.51it/s]
 19%|#8        | 9/48 [00:07<00:24,  1.62it/s]
 21%|##        | 10/48 [00:08<00:22,  1.71it/s]
 23%|##2       | 11/48 [00:08<00:20,  1.80it/s]
 25%|##5       | 12/48 [00:09<00:19,  1.88it/s]
 27%|##7       | 13/48 [00:09<00:18,  1.94it/s]
 29%|##9       | 14/48 [00:09<00:17,  1.98it/s]
 31%|###1      | 15/48 [00:10<00:16,  2.03it/s]
 33%|###3      | 16/48 [00:10<00:15,  2.05it/s]
 35%|###5      | 17/48 [00:11<00:15,  2.06it/s]
 38%|###7      | 18/48 [00:11<00:14,  2.08it/s]
 40%|###9      | 19/48 [00:12<00:13,  2.08it/s]
 42%|####1     | 20/48 [00:12<00:13,  2.10it/s]
 44%|####3     | 21/48 [00:13<00:12,  2.09it/s]
 46%|####5     | 22/48 [00:13<00:12,  2.10it/s]
 48%|####7     | 23/48 [00:14<00:11,  2.11it/s]
 50%|#####     | 24/48 [00:14<00:11,  2.09it/s]
 52%|#####2    | 25/48 [00:15<00:10,  2.10it/s]
 54%|#####4    | 26/48 [00:15<00:10,  2.11it/s]
 56%|#####6    | 27/48 [00:16<00:09,  2.11it/s]
 58%|#####8    | 28/48 [00:16<00:09,  2.09it/s]
 60%|######    | 29/48 [00:17<00:09,  2.10it/s]
 62%|######2   | 30/48 [00:17<00:08,  2.09it/s]
 65%|######4   | 31/48 [00:18<00:08,  2.10it/s]
 67%|######6   | 32/48 [00:18<00:07,  2.09it/s]
 69%|######8   | 33/48 [00:18<00:07,  2.10it/s]
 71%|#######   | 34/48 [00:19<00:06,  2.09it/s]
 73%|#######2  | 35/48 [00:19<00:06,  2.09it/s]
 75%|#######5  | 36/48 [00:20<00:05,  2.08it/s]
 77%|#######7  | 37/48 [00:20<00:05,  2.09it/s]
 79%|#######9  | 38/48 [00:21<00:04,  2.10it/s]
 81%|########1 | 39/48 [00:21<00:04,  2.10it/s]
 83%|########3 | 40/48 [00:22<00:03,  2.10it/s]
 85%|########5 | 41/48 [00:22<00:03,  2.09it/s]
 88%|########7 | 42/48 [00:23<00:02,  2.10it/s]
 90%|########9 | 43/48 [00:23<00:02,  2.09it/s]
 92%|#########1| 44/48 [00:24<00:01,  2.10it/s]
 94%|#########3| 45/48 [00:24<00:01,  2.09it/s]
 96%|#########5| 46/48 [00:25<00:00,  2.08it/s]
 98%|#########7| 47/48 [00:25<00:00,  2.08it/s]
100%|##########| 48/48 [00:26<00:00,  2.09it/s]
100%|##########| 48/48 [00:26<00:00,  1.83it/s]
C:\Users\Rudolf\AppData\Local\slicer.org\Slicer 5.4.0_2\lib\Python\Lib\site-packages\requests\__init__.py:102: RequestsDependencyWarning: urllib3 (1.26.17) or chardet (5.1.0)/charset_normalizer (2.0.12) doesn't match a supported version!
  warnings.warn("urllib3 ({}) or chardet ({})/charset_normalizer ({}) doesn't match a supported "
C:\Users\Rudolf\AppData\Local\slicer.org\Slicer 5.4.0_2\lib\Python\Lib\site-packages\requests\__init__.py:102: RequestsDependencyWarning: urllib3 (1.26.17) or chardet (5.1.0)/charset_normalizer (2.0.12) doesn't match a supported version!
  warnings.warn("urllib3 ({}) or chardet ({})/charset_normalizer ({}) doesn't match a supported "

  0%|          | 0/48 [00:00<?, ?it/s]
 10%|#         | 5/48 [00:00<00:01, 28.34it/s]
 17%|#6        | 8/48 [00:01<00:09,  4.17it/s]
 21%|##        | 10/48 [00:02<00:11,  3.21it/s]
 23%|##2       | 11/48 [00:03<00:12,  2.92it/s]
 25%|##5       | 12/48 [00:03<00:13,  2.71it/s]
 27%|##7       | 13/48 [00:03<00:13,  2.55it/s]
 29%|##9       | 14/48 [00:04<00:14,  2.41it/s]
 31%|###1      | 15/48 [00:04<00:14,  2.32it/s]
 33%|###3      | 16/48 [00:05<00:14,  2.24it/s]
 35%|###5      | 17/48 [00:05<00:14,  2.19it/s]
 38%|###7      | 18/48 [00:06<00:13,  2.17it/s]
 40%|###9      | 19/48 [00:06<00:13,  2.14it/s]
 42%|####1     | 20/48 [00:07<00:13,  2.13it/s]
 44%|####3     | 21/48 [00:07<00:12,  2.11it/s]
 46%|####5     | 22/48 [00:08<00:12,  2.09it/s]
 48%|####7     | 23/48 [00:08<00:11,  2.10it/s]
 50%|#####     | 24/48 [00:09<00:11,  2.09it/s]
 52%|#####2    | 25/48 [00:09<00:11,  2.08it/s]
 54%|#####4    | 26/48 [00:10<00:10,  2.08it/s]
 56%|#####6    | 27/48 [00:10<00:10,  2.09it/s]
 58%|#####8    | 28/48 [00:11<00:09,  2.08it/s]
 60%|######    | 29/48 [00:11<00:09,  2.07it/s]
 62%|######2   | 30/48 [00:12<00:08,  2.07it/s]
 65%|######4   | 31/48 [00:12<00:08,  2.08it/s]
 67%|######6   | 32/48 [00:13<00:07,  2.07it/s]
 69%|######8   | 33/48 [00:13<00:07,  2.09it/s]
 71%|#######   | 34/48 [00:14<00:06,  2.08it/s]
 73%|#######2  | 35/48 [00:14<00:06,  2.07it/s]
 75%|#######5  | 36/48 [00:15<00:05,  2.08it/s]
 77%|#######7  | 37/48 [00:15<00:05,  2.07it/s]
 79%|#######9  | 38/48 [00:16<00:04,  2.07it/s]
 81%|########1 | 39/48 [00:16<00:04,  2.07it/s]
 83%|########3 | 40/48 [00:16<00:03,  2.08it/s]
 85%|########5 | 41/48 [00:17<00:03,  2.07it/s]
 88%|########7 | 42/48 [00:17<00:02,  2.07it/s]
 90%|########9 | 43/48 [00:18<00:02,  2.07it/s]
 92%|#########1| 44/48 [00:18<00:01,  2.06it/s]
 94%|#########3| 45/48 [00:19<00:01,  2.06it/s]
 96%|#########5| 46/48 [00:19<00:00,  2.06it/s]
 98%|#########7| 47/48 [00:20<00:00,  2.06it/s]
100%|##########| 48/48 [00:20<00:00,  2.06it/s]
100%|##########| 48/48 [00:20<00:00,  2.30it/s]
C:\Users\Rudolf\AppData\Local\slicer.org\Slicer 5.4.0_2\lib\Python\Lib\site-packages\requests\__init__.py:102: RequestsDependencyWarning: urllib3 (1.26.17) or chardet (5.1.0)/charset_normalizer (2.0.12) doesn't match a supported version!
  warnings.warn("urllib3 ({}) or chardet ({})/charset_normalizer ({}) doesn't match a supported "
C:\Users\Rudolf\AppData\Local\slicer.org\Slicer 5.4.0_2\lib\Python\Lib\site-packages\requests\__init__.py:102: RequestsDependencyWarning: urllib3 (1.26.17) or chardet (5.1.0)/charset_normalizer (2.0.12) doesn't match a supported version!
  warnings.warn("urllib3 ({}) or chardet ({})/charset_normalizer ({}) doesn't match a supported "

  0%|          | 0/48 [00:00<?, ?it/s]
 10%|#         | 5/48 [00:00<00:02, 20.35it/s]
 17%|#6        | 8/48 [00:01<00:09,  4.07it/s]
 19%|#8        | 9/48 [00:02<00:11,  3.46it/s]
 21%|##        | 10/48 [00:02<00:12,  3.06it/s]
 23%|##2       | 11/48 [00:03<00:13,  2.76it/s]
 25%|##5       | 12/48 [00:03<00:14,  2.56it/s]
 27%|##7       | 13/48 [00:04<00:14,  2.42it/s]
 29%|##9       | 14/48 [00:04<00:14,  2.31it/s]
 31%|###1      | 15/48 [00:05<00:14,  2.24it/s]
 33%|###3      | 16/48 [00:05<00:14,  2.18it/s]
 35%|###5      | 17/48 [00:06<00:14,  2.15it/s]
 38%|###7      | 18/48 [00:06<00:14,  2.12it/s]
 40%|###9      | 19/48 [00:06<00:13,  2.10it/s]
 42%|####1     | 20/48 [00:07<00:13,  2.10it/s]
 44%|####3     | 21/48 [00:07<00:12,  2.09it/s]
 46%|####5     | 22/48 [00:08<00:12,  2.09it/s]
 48%|####7     | 23/48 [00:08<00:12,  2.08it/s]
 50%|#####     | 24/48 [00:09<00:11,  2.08it/s]
 52%|#####2    | 25/48 [00:09<00:11,  2.07it/s]
 54%|#####4    | 26/48 [00:10<00:10,  2.08it/s]
 56%|#####6    | 27/48 [00:10<00:10,  2.08it/s]
 58%|#####8    | 28/48 [00:11<00:09,  2.07it/s]
 60%|######    | 29/48 [00:11<00:09,  2.07it/s]
 62%|######2   | 30/48 [00:12<00:08,  2.06it/s]
 65%|######4   | 31/48 [00:12<00:08,  2.06it/s]
 67%|######6   | 32/48 [00:13<00:07,  2.07it/s]
 69%|######8   | 33/48 [00:13<00:07,  2.05it/s]
 71%|#######   | 34/48 [00:14<00:06,  2.07it/s]
 73%|#######2  | 35/48 [00:14<00:06,  2.06it/s]
 75%|#######5  | 36/48 [00:15<00:05,  2.08it/s]
 77%|#######7  | 37/48 [00:15<00:05,  2.06it/s]
 79%|#######9  | 38/48 [00:16<00:04,  2.06it/s]
 81%|########1 | 39/48 [00:16<00:04,  2.06it/s]
 83%|########3 | 40/48 [00:17<00:03,  2.07it/s]
 85%|########5 | 41/48 [00:17<00:03,  2.06it/s]
 88%|########7 | 42/48 [00:18<00:02,  2.06it/s]
 90%|########9 | 43/48 [00:18<00:02,  2.06it/s]
 92%|#########1| 44/48 [00:19<00:01,  2.06it/s]
 94%|#########3| 45/48 [00:19<00:01,  2.05it/s]
 96%|#########5| 46/48 [00:20<00:00,  2.05it/s]
 98%|#########7| 47/48 [00:20<00:00,  2.05it/s]
100%|##########| 48/48 [00:21<00:00,  2.05it/s]
100%|##########| 48/48 [00:21<00:00,  2.28it/s]
C:\Users\Rudolf\AppData\Local\slicer.org\Slicer 5.4.0_2\lib\Python\Lib\site-packages\requests\__init__.py:102: RequestsDependencyWarning: urllib3 (1.26.17) or chardet (5.1.0)/charset_normalizer (2.0.12) doesn't match a supported version!
  warnings.warn("urllib3 ({}) or chardet ({})/charset_normalizer ({}) doesn't match a supported "
C:\Users\Rudolf\AppData\Local\slicer.org\Slicer 5.4.0_2\lib\Python\Lib\site-packages\requests\__init__.py:102: RequestsDependencyWarning: urllib3 (1.26.17) or chardet (5.1.0)/charset_normalizer (2.0.12) doesn't match a supported version!
  warnings.warn("urllib3 ({}) or chardet ({})/charset_normalizer ({}) doesn't match a supported "

  0%|          | 0/48 [00:00<?, ?it/s]
 10%|#         | 5/48 [00:00<00:01, 25.19it/s]
 17%|#6        | 8/48 [00:01<00:09,  4.11it/s]
 21%|##        | 10/48 [00:02<00:12,  3.15it/s]
 23%|##2       | 11/48 [00:03<00:12,  2.88it/s]
 25%|##5       | 12/48 [00:03<00:13,  2.66it/s]
 27%|##7       | 13/48 [00:04<00:14,  2.49it/s]
 29%|##9       | 14/48 [00:04<00:14,  2.36it/s]
 31%|###1      | 15/48 [00:05<00:14,  2.27it/s]
 33%|###3      | 16/48 [00:05<00:14,  2.20it/s]
 35%|###5      | 17/48 [00:06<00:14,  2.16it/s]
 38%|###7      | 18/48 [00:06<00:14,  2.14it/s]
 40%|###9      | 19/48 [00:07<00:13,  2.10it/s]
 42%|####1     | 20/48 [00:07<00:13,  2.10it/s]
 44%|####3     | 21/48 [00:07<00:13,  2.07it/s]
 46%|####5     | 22/48 [00:08<00:12,  2.07it/s]
 48%|####7     | 23/48 [00:08<00:12,  2.07it/s]
 50%|#####     | 24/48 [00:09<00:11,  2.05it/s]
 52%|#####2    | 25/48 [00:09<00:11,  2.05it/s]
 54%|#####4    | 26/48 [00:10<00:10,  2.05it/s]
 56%|#####6    | 27/48 [00:10<00:10,  2.05it/s]
 58%|#####8    | 28/48 [00:11<00:09,  2.05it/s]
 60%|######    | 29/48 [00:11<00:09,  2.04it/s]
 62%|######2   | 30/48 [00:12<00:08,  2.04it/s]
 65%|######4   | 31/48 [00:12<00:08,  2.05it/s]
 67%|######6   | 32/48 [00:13<00:07,  2.04it/s]
 69%|######8   | 33/48 [00:13<00:07,  2.03it/s]
 71%|#######   | 34/48 [00:14<00:06,  2.03it/s]
 73%|#######2  | 35/48 [00:14<00:06,  2.04it/s]
 75%|#######5  | 36/48 [00:15<00:05,  2.04it/s]
 77%|#######7  | 37/48 [00:15<00:05,  2.06it/s]
 79%|#######9  | 38/48 [00:16<00:04,  2.04it/s]
 81%|########1 | 39/48 [00:16<00:04,  2.04it/s]
 83%|########3 | 40/48 [00:17<00:03,  2.05it/s]
 85%|########5 | 41/48 [00:17<00:03,  2.05it/s]
 88%|########7 | 42/48 [00:18<00:02,  2.03it/s]
 90%|########9 | 43/48 [00:18<00:02,  2.03it/s]
 92%|#########1| 44/48 [00:19<00:01,  2.04it/s]
 94%|#########3| 45/48 [00:19<00:01,  2.04it/s]
 96%|#########5| 46/48 [00:20<00:00,  2.03it/s]
 98%|#########7| 47/48 [00:20<00:00,  2.03it/s]
100%|##########| 48/48 [00:21<00:00,  2.04it/s]
100%|##########| 48/48 [00:21<00:00,  2.26it/s]
C:\Users\Rudolf\AppData\Local\slicer.org\Slicer 5.4.0_2\lib\Python\Lib\site-packages\requests\__init__.py:102: RequestsDependencyWarning: urllib3 (1.26.17) or chardet (5.1.0)/charset_normalizer (2.0.12) doesn't match a supported version!
  warnings.warn("urllib3 ({}) or chardet ({})/charset_normalizer ({}) doesn't match a supported "
C:\Users\Rudolf\AppData\Local\slicer.org\Slicer 5.4.0_2\lib\Python\Lib\site-packages\requests\__init__.py:102: RequestsDependencyWarning: urllib3 (1.26.17) or chardet (5.1.0)/charset_normalizer (2.0.12) doesn't match a supported version!
  warnings.warn("urllib3 ({}) or chardet ({})/charset_normalizer ({}) doesn't match a supported "

  0%|          | 0/48 [00:00<?, ?it/s]
 10%|#         | 5/48 [00:00<00:01, 24.99it/s]
 17%|#6        | 8/48 [00:01<00:09,  4.09it/s]
 21%|##        | 10/48 [00:02<00:12,  3.14it/s]
 23%|##2       | 11/48 [00:03<00:13,  2.84it/s]
 25%|##5       | 12/48 [00:03<00:13,  2.63it/s]
 27%|##7       | 13/48 [00:04<00:14,  2.47it/s]
 29%|##9       | 14/48 [00:04<00:14,  2.36it/s]
 31%|###1      | 15/48 [00:05<00:14,  2.25it/s]
 33%|###3      | 16/48 [00:05<00:14,  2.20it/s]
 35%|###5      | 17/48 [00:06<00:14,  2.15it/s]
 38%|###7      | 18/48 [00:06<00:14,  2.10it/s]
 40%|###9      | 19/48 [00:07<00:13,  2.09it/s]
 42%|####1     | 20/48 [00:07<00:13,  2.07it/s]
 44%|####3     | 21/48 [00:08<00:13,  2.05it/s]
 46%|####5     | 22/48 [00:08<00:12,  2.05it/s]
 48%|####7     | 23/48 [00:09<00:12,  2.05it/s]
 50%|#####     | 24/48 [00:09<00:11,  2.03it/s]
 52%|#####2    | 25/48 [00:10<00:11,  2.04it/s]
 54%|#####4    | 26/48 [00:10<00:10,  2.04it/s]
 56%|#####6    | 27/48 [00:10<00:10,  2.03it/s]
 58%|#####8    | 28/48 [00:11<00:09,  2.04it/s]
 60%|######    | 29/48 [00:11<00:09,  2.02it/s]
 62%|######2   | 30/48 [00:12<00:08,  2.03it/s]
 65%|######4   | 31/48 [00:12<00:08,  2.04it/s]
 67%|######6   | 32/48 [00:13<00:07,  2.02it/s]
 69%|######8   | 33/48 [00:13<00:07,  2.03it/s]
 71%|#######   | 34/48 [00:14<00:06,  2.03it/s]
 73%|#######2  | 35/48 [00:14<00:06,  2.03it/s]
 75%|#######5  | 36/48 [00:15<00:05,  2.02it/s]
 77%|#######7  | 37/48 [00:15<00:05,  1.97it/s]
 79%|#######9  | 38/48 [00:16<00:05,  1.69it/s]
 81%|########1 | 39/48 [00:18<00:08,  1.11it/s]
 83%|########3 | 40/48 [00:19<00:07,  1.08it/s]
 85%|########5 | 41/48 [00:19<00:05,  1.20it/s]
 88%|########7 | 42/48 [00:20<00:04,  1.30it/s]
 90%|########9 | 43/48 [00:21<00:03,  1.38it/s]
 92%|#########1| 44/48 [00:21<00:02,  1.43it/s]
 94%|#########3| 45/48 [00:22<00:02,  1.48it/s]
 96%|#########5| 46/48 [00:23<00:01,  1.52it/s]
 98%|#########7| 47/48 [00:23<00:00,  1.54it/s]
100%|##########| 48/48 [00:24<00:00,  1.57it/s]
100%|##########| 48/48 [00:24<00:00,  1.97it/s]
C:\Users\Rudolf\AppData\Local\slicer.org\Slicer 5.4.0_2\lib\Python\Lib\site-packages\requests\__init__.py:102: RequestsDependencyWarning: urllib3 (1.26.17) or chardet (5.1.0)/charset_normalizer (2.0.12) doesn't match a supported version!
  warnings.warn("urllib3 ({}) or chardet ({})/charset_normalizer ({}) doesn't match a supported "

If you use this tool please cite: https://pubs.rsna.org/doi/10.1148/ryai.230024

Resampling...
  Resampled in 6.84s
Predicting part 1 of 5 ...
Predicting part 2 of 5 ...
Predicting part 3 of 5 ...
Predicting part 4 of 5 ...
Predicting part 5 of 5 ...
  Predicted in 260.77s
Resampling...
Saving segmentations...
  Saved in 0.69s
Importing segmentation results...
Failed to deserialize terminology string: Segmentation category and type - Total Segmentator~SCT^123037004^Anatomical Structure~SCT^69748006^Thyroid structure~SCT^^~Anatomic codes - DICOM master list~^^~^^|
Failed to deserialize terminology string: Segmentation category and type - DICOM master list~SCT^123037004^Anatomical Structure~SCT^53603007^Entire pulmonary vein~^^~Anatomic codes - DICOM master list~^^~^^|
Failed to deserialize terminology string: Segmentation category and type - Total Segmentator~SCT^123037004^Anatomical Structure~SCT^29700009^Subclavian artery~SCT^24028007^Right~Anatomic codes - DICOM master list~^^~^^|
Failed to deserialize terminology string: Segmentation category and type - Total Segmentator~SCT^123037004^Anatomical Structure~SCT^85235006^Subclavian artery~SCT^7771000^Left~Anatomic codes - DICOM master list~^^~^^|
Failed to deserialize terminology string: Segmentation category and type - Total Segmentator~SCT^123037004^Anatomical Structure~SCT^65355003^Right common carotid artery~SCT^24028007^Right~Anatomic codes - DICOM master list~^^~^^|
Failed to deserialize terminology string: Segmentation category and type - Total Segmentator~SCT^123037004^Anatomical Structure~SCT^113263003^Left common carotid artery~SCT^7771000^Left~Anatomic codes - DICOM master list~^^~^^|
Failed to deserialize terminology string: Segmentation category and type - Total Segmentator~SCT^123037004^Anatomical Structure~SCT^8887007^Brachiocephalic vein~SCT^7771000^Left~Anatomic codes - DICOM master list~^^~^^|
Failed to deserialize terminology string: Segmentation category and type - Total Segmentator~SCT^123037004^Anatomical Structure~SCT^8887007^Brachiocephalic vein~SCT^24028007^Right~Anatomic codes - DICOM master list~^^~^^|
Failed to deserialize terminology string: Segmentation category and type - DICOM master list~SCT^123037004^Anatomical Structure~SCT^305223006^Entire atrial appendage~^7771000^Left~Anatomic codes - DICOM master list~^^~^^|
Failed to deserialize terminology string: Segmentation category and type - Total Segmentator~SCT^123037004^Anatomical Structure~SCT^ 50016007^Rib cartilage~SCT^^Anatomic codes - DICOM master list~^^~^^|
Cleaning up temporary folder...
Processing completed in 296.09 seconds

Processing finished.

wasserth · 2023-10-16T12:55:44Z

I guess in Slicer it does not recognize the downloaded weights. How do you specify in Slicer where the weights are stored? Do you set TOTALSEG_WEIGHTS_PATH ? Or do you not specify anything and they get stored to a default location?

rbumm · 2023-10-16T13:34:53Z

TOTALSEG_WEIGHTS_PATH was not set, but I also tried setting that environment variable (pointing it to the Slicer script directory). What is the name of the weight file file that should be generated?

wasserth · 2023-10-19T11:14:53Z

For v2.0.3: The default TOTALSEG_WEIGHTS_PATH is ~/.totalsegmentator/nnunet/results and for the fast model it should download the file Dataset297_TotalSegmentator_total_3mm_1559subj.zip into this directory and extract it.
In v2.0.4 the filename has changed slightly to Dataset297_TotalSegmentator_total_3mm_1559subj_v204.zip.

rbumm · 2023-10-19T13:31:24Z

I found the downloaded file in the .totalsegmentator directory of my user dir, it is unzipped, but it gets redownloaded upon every application ot Totalsegmentator by 3D Slicer. The folder is not protected. . [image: image.png] Am Do., 19. Okt. 2023 um 13:15 Uhr schrieb Jakob Wasserthal < ***@***.***>:

…

For v2.0.3: The default TOTALSEG_WEIGHTS_PATH is ~/.totalsegmentator/nnunet/results and for the fast model it should download the file Dataset297_TotalSegmentator_total_3mm_1559subj.zip into this directory and extract it. In v2.0.4 the filename has changed slightly to Dataset297_TotalSegmentator_total_3mm_1559subj_v204.zip. — Reply to this email directly, view it on GitHub <#196 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AEKMXPVFOMETJW3C7SVBNH3YAEDTRAVCNFSM6AAAAAA6ATWYPSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONZQGY2TGMBWGY> . You are receiving this because you authored the thread.Message ID: ***@***.***>

rbumm · 2023-10-19T13:34:35Z

It is a folder, not a file, with several subfolders. Am Do., 19. Okt. 2023 um 15:30 Uhr schrieb Rudolf B < ***@***.***>:

…

I found the downloaded file in the .totalsegmentator directory of my user dir, it is unzipped, but it gets redownloaded upon every application ot Totalsegmentator by 3D Slicer. The folder is not protected. . [image: image.png] Am Do., 19. Okt. 2023 um 13:15 Uhr schrieb Jakob Wasserthal < ***@***.***>: > For v2.0.3: The default TOTALSEG_WEIGHTS_PATH is > ~/.totalsegmentator/nnunet/results and for the fast model it should > download the file Dataset297_TotalSegmentator_total_3mm_1559subj.zip > into this directory and extract it. > In v2.0.4 the filename has changed slightly to > Dataset297_TotalSegmentator_total_3mm_1559subj_v204.zip. > > — > Reply to this email directly, view it on GitHub > <#196 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AEKMXPVFOMETJW3C7SVBNH3YAEDTRAVCNFSM6AAAAAA6ATWYPSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONZQGY2TGMBWGY> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

wasserth · 2023-10-19T13:48:09Z

Correct, it should be a folder with subfolders.
I do not really have an idea why it is getting downloaded over and over again :|

lassoan · 2023-10-19T13:50:48Z

@rbumm I see these progress bars, but I'm not sure if they refer to downloading or just feedback for some processing:

Processing started
Writing input file to C:/Users/andra/AppData/Local/Temp/Slicer/__SlicerTemp__2023-10-19_09+45+37.921/total-segmentator-input.nii
Creating segmentations with TotalSegmentator AI...
Total Segmentator arguments: ['-i', 'C:/Users/andra/AppData/Local/Temp/Slicer/__SlicerTemp__2023-10-19_09+45+37.921/total-segmentator-input.nii', '-o', 'C:/Users/andra/AppData/Local/Temp/Slicer/__SlicerTemp__2023-10-19_09+45+37.921/segmentation', '--ml', '--task', 'total']

  0%|          | 0/36 [00:00<?, ?it/s]
  3%|2         | 1/36 [00:02<01:18,  2.25s/it]
 44%|####4     | 16/36 [00:02<00:02,  9.03it/s]
 61%|######1   | 22/36 [00:02<00:01,  9.95it/s]
 72%|#######2  | 26/36 [00:03<00:00, 10.30it/s]
 81%|########  | 29/36 [00:03<00:00, 10.61it/s]
 89%|########8 | 32/36 [00:03<00:00, 10.87it/s]
 94%|#########4| 34/36 [00:03<00:00, 10.99it/s]
100%|##########| 36/36 [00:04<00:00, 11.13it/s]
100%|##########| 36/36 [00:04<00:00,  8.78it/s]

  0%|          | 0/36 [00:00<?, ?it/s]
 33%|###3      | 12/36 [00:00<00:00, 117.65it/s]
 67%|######6   | 24/36 [00:00<00:00, 23.25it/s]
 83%|########3 | 30/36 [00:01<00:00, 17.87it/s]
 94%|#########4| 34/36 [00:01<00:00, 16.17it/s]
100%|##########| 36/36 [00:01<00:00, 18.62it/s]

  0%|          | 0/36 [00:00<?, ?it/s]
 39%|###8      | 14/36 [00:00<00:00, 138.61it/s]
 78%|#######7  | 28/36 [00:01<00:00, 20.15it/s]
 97%|#########7| 35/36 [00:01<00:00, 16.23it/s]
100%|##########| 36/36 [00:01<00:00, 18.72it/s]

  0%|          | 0/36 [00:00<?, ?it/s]
 39%|###8      | 14/36 [00:00<00:00, 66.99it/s]
 58%|#####8    | 21/36 [00:00<00:00, 22.58it/s]
 69%|######9   | 25/36 [00:01<00:00, 18.48it/s]
 78%|#######7  | 28/36 [00:01<00:00, 16.51it/s]
 83%|########3 | 30/36 [00:01<00:00, 15.72it/s]
 89%|########8 | 32/36 [00:01<00:00, 14.99it/s]
 94%|#########4| 34/36 [00:01<00:00, 14.14it/s]
100%|##########| 36/36 [00:02<00:00, 13.78it/s]
100%|##########| 36/36 [00:02<00:00, 17.69it/s]

  0%|          | 0/36 [00:00<?, ?it/s]
 39%|###8      | 14/36 [00:00<00:00, 100.00it/s]
 67%|######6   | 24/36 [00:01<00:00, 20.29it/s]
 81%|########  | 29/36 [00:01<00:00, 17.10it/s]
 92%|#########1| 33/36 [00:01<00:00, 15.66it/s]
100%|##########| 36/36 [00:02<00:00, 14.97it/s]
100%|##########| 36/36 [00:02<00:00, 18.00it/s]

If you use this tool please cite: https://pubs.rsna.org/doi/10.1148/ryai.230024

Resampling...
  Resampled in 10.76s
Predicting part 1 of 5 ...
Predicting part 2 of 5 ...
Predicting part 3 of 5 ...
Predicting part 4 of 5 ...
Predicting part 5 of 5 ...
  Predicted in 104.88s
Resampling...
Saving segmentations...
  Saved in 3.18s
Importing segmentation results...
Cleaning up temporary folder...
Processing completed in 147.69 seconds

Processing finished.

rbumm · 2023-10-19T17:12:10Z

Could you shed some light on that Jakob?Sent from my iPhoneOn 19 Oct 2023, at 15:50, Andras Lasso ***@***.***> wrote: @rbumm I see these progress bars, but I'm not sure if they refer to downloading or just feedback for some processing: Processing started Writing input file to C:/Users/andra/AppData/Local/Temp/Slicer/__SlicerTemp__2023-10-19_09+45+37.921/total-segmentator-input.nii Creating segmentations with TotalSegmentator AI... Total Segmentator arguments: ['-i', 'C:/Users/andra/AppData/Local/Temp/Slicer/__SlicerTemp__2023-10-19_09+45+37.921/total-segmentator-input.nii', '-o', 'C:/Users/andra/AppData/Local/Temp/Slicer/__SlicerTemp__2023-10-19_09+45+37.921/segmentation', '--ml', '--task', 'total'] 0%| | 0/36 [00:00<?, ?it/s] 3%|2 | 1/36 [00:02<01:18, 2.25s/it] 44%|####4 | 16/36 [00:02<00:02, 9.03it/s] 61%|######1 | 22/36 [00:02<00:01, 9.95it/s] 72%|#######2 | 26/36 [00:03<00:00, 10.30it/s] 81%|######## | 29/36 [00:03<00:00, 10.61it/s] 89%|########8 | 32/36 [00:03<00:00, 10.87it/s] 94%|#########4| 34/36 [00:03<00:00, 10.99it/s] 100%|##########| 36/36 [00:04<00:00, 11.13it/s] 100%|##########| 36/36 [00:04<00:00, 8.78it/s] 0%| | 0/36 [00:00<?, ?it/s] 33%|###3 | 12/36 [00:00<00:00, 117.65it/s] 67%|######6 | 24/36 [00:00<00:00, 23.25it/s] 83%|########3 | 30/36 [00:01<00:00, 17.87it/s] 94%|#########4| 34/36 [00:01<00:00, 16.17it/s] 100%|##########| 36/36 [00:01<00:00, 18.62it/s] 0%| | 0/36 [00:00<?, ?it/s] 39%|###8 | 14/36 [00:00<00:00, 138.61it/s] 78%|#######7 | 28/36 [00:01<00:00, 20.15it/s] 97%|#########7| 35/36 [00:01<00:00, 16.23it/s] 100%|##########| 36/36 [00:01<00:00, 18.72it/s] 0%| | 0/36 [00:00<?, ?it/s] 39%|###8 | 14/36 [00:00<00:00, 66.99it/s] 58%|#####8 | 21/36 [00:00<00:00, 22.58it/s] 69%|######9 | 25/36 [00:01<00:00, 18.48it/s] 78%|#######7 | 28/36 [00:01<00:00, 16.51it/s] 83%|########3 | 30/36 [00:01<00:00, 15.72it/s] 89%|########8 | 32/36 [00:01<00:00, 14.99it/s] 94%|#########4| 34/36 [00:01<00:00, 14.14it/s] 100%|##########| 36/36 [00:02<00:00, 13.78it/s] 100%|##########| 36/36 [00:02<00:00, 17.69it/s] 0%| | 0/36 [00:00<?, ?it/s] 39%|###8 | 14/36 [00:00<00:00, 100.00it/s] 67%|######6 | 24/36 [00:01<00:00, 20.29it/s] 81%|######## | 29/36 [00:01<00:00, 17.10it/s] 92%|#########1| 33/36 [00:01<00:00, 15.66it/s] 100%|##########| 36/36 [00:02<00:00, 14.97it/s] 100%|##########| 36/36 [00:02<00:00, 18.00it/s] If you use this tool please cite: https://pubs.rsna.org/doi/10.1148/ryai.230024 Resampling... Resampled in 10.76s Predicting part 1 of 5 ... Predicting part 2 of 5 ... Predicting part 3 of 5 ... Predicting part 4 of 5 ... Predicting part 5 of 5 ... Predicted in 104.88s Resampling... Saving segmentations... Saved in 3.18s Importing segmentation results... Cleaning up temporary folder... Processing completed in 147.69 seconds Processing finished. —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

fixes wasserth#196

lassoan · 2023-10-20T03:28:57Z

I've found the root cause of the issue and submitted a pull request with the fix (#202)

lassoan added a commit to lassoan/TotalSegmentator that referenced this issue Oct 20, 2023

Fix caching of weights for total task in fast mode

dcbb0bd

fixes wasserth#196

lassoan mentioned this issue Oct 20, 2023

Fix caching of weights for total task in fast mode #202

Merged

wasserth closed this as completed in #202 Oct 20, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Is this downloading in fast mode itended ? it happens every time. #196

Is this downloading in fast mode itended ? it happens every time. #196

rbumm commented Oct 15, 2023

wasserth commented Oct 16, 2023

rbumm commented Oct 16, 2023 •

edited

Loading

wasserth commented Oct 16, 2023

rbumm commented Oct 16, 2023

wasserth commented Oct 19, 2023

rbumm commented Oct 19, 2023 via email

rbumm commented Oct 19, 2023 via email

wasserth commented Oct 19, 2023

lassoan commented Oct 19, 2023

rbumm commented Oct 19, 2023 via email

lassoan commented Oct 20, 2023

Is this downloading in fast mode itended ? it happens every time. #196

Is this downloading in fast mode itended ? it happens every time. #196

Comments

rbumm commented Oct 15, 2023

wasserth commented Oct 16, 2023

rbumm commented Oct 16, 2023 • edited Loading

wasserth commented Oct 16, 2023

rbumm commented Oct 16, 2023

wasserth commented Oct 19, 2023

rbumm commented Oct 19, 2023 via email

rbumm commented Oct 19, 2023 via email

wasserth commented Oct 19, 2023

lassoan commented Oct 19, 2023

rbumm commented Oct 19, 2023 via email

lassoan commented Oct 20, 2023

rbumm commented Oct 16, 2023 •

edited

Loading