Skip to content

Latest commit

 

History

History
89 lines (54 loc) · 2.71 KB

README.md

File metadata and controls

89 lines (54 loc) · 2.71 KB
Raw

Generating an SSH Key (Ed25519)

This guide provides instructions on how to generate an Ed25519 SSH key for secure access to remote systems.

Steps to Generate an Ed25519 SSH Key

  1. Open Terminal: Open your terminal or command line interface.

  2. Generate the SSH Key: Execute the command:

ssh-keygen -t ed25519

  1. Save the Key: When prompted to "Enter a file in which to save the key," press Enter to save it to the default location, typically ~/.ssh/id_ed25519.

  2. Enter a Secure Passphrase (optional): You may be prompted to enter a passphrase. While optional, this adds an extra layer of security.

  3. Copy the SSH Key: To print the public key to your terminal, use:

cat ~/.ssh/id_ed25519.pub
  1. Add the SSH Key to Your Remote Machine: Access your remote machine and add the public key to the ~/.ssh/authorized_keys file.

Conclusion

You have now successfully generated an Ed25519 SSH key, enhancing your security for remote system access.

Connecting to a Remote Machine via WireGuard

This README provides step-by-step instructions on how to connect to a remote machine using WireGuard, a simple and modern VPN that utilizes state-of-the-art cryptography.

Steps to Connect

1. Install WireGuard Locally

First, install WireGuard on your local machine. You can download it from WireGuard's official website.

2. Generate Keys

Generate your private and public keys using the following command:

wg genkey | tee privkey.txt | wg pubkey | tee pubkey.txt

3. Obtain and Configure the WireGuard Configuration File

You will need a configuration file from your network administrator. Once you have it, replace <YOUR PRIVATE KEY> with the key you generated in the previous step. Then, move this file to the /etc/wireguard directory.

An example configuration file (wg0.conf) would look like this:

[Interface]
Address = 10.10.1.10
PrivateKey = <YOUR PRIVATE KEY>

[Peer]
PublicKey = <SERVER PUBLIC KEY>
AllowedIPs = 10.10.1.0/24
Endpoint = example.com:51820

4. Run the WireGuard Tunnel

To start the WireGuard tunnel, use the following command:

sudo wg-quick up wg0

If you want WireGuard to start at boot time, enable it with:

sudo systemctl enable wg-quick@wg0

5. Check the Connection

Finally, check if a new interface has been created and if the connection is established:

  • Use ifconfig to check for the new interface.
  • Use sudo wg show to check if the connection is established.

Conclusion

Following these steps should establish a secure connection to your remote machine using WireGuard. For further assistance or troubleshooting, consult the WireGuard documentation or your network administrator.