MIMXRT1060-EVK

page_type	description	languages	products
sample	Connecting an NXP MIMXRT1060-EVK device to Azure IoT using Azure RTOS	c	azure-iot azure-iot-pnp azure-rtos azure-iot-central

Connect an NXP MIMXRT1060-EVK Evaluation kit to Azure IoT

The Quickstart button above provides the complete steps for creating an IoT Central application and then configuring, building and flashing the device.

For guidance on connecting additional devices, see the Embedded device quickstarts.

What you need

• The NXP MIMXRT1060-EVK Evaluation kit
• USB 2.0 A male to Micro USB male cable
• Wired Ethernet access
• Ethernet cable

Steps

1. Recursively clone the repository:

   git clone --recursive https://github.com/azure-rtos/getting-started.git

2. Install the development tools:

   getting-started\tools\get-toolchain.bat

3. Add Azure IoT configuration to the config file:

   getting-started\NXP\MIMXRT1060-EVK\app\azure_config.h

4. Build the binary image:

   getting-started\NXP\MIMXRT106-EVK\tools\rebuild.bat

5. Flash the image to the device by copying the image file to the RT1060-EVK drive:

   getting-started\NXP\MIMXRT106-EVK\build\app\mimxrt1060_azure_iot.bin

6. Configure a serial port app at baud rate 115,200 to monitor the device output.