testsuite.yml

#
# Run the tests on various build configurations and various operating systems.
#
# In the Perl/perl5 repository all jobs are run by default.
#
# To enable the testing on a fork of the perl5 repository you first need to
# enable GitHub Actions in 'Settings' -> 'Actions' -> 'General'.
#
# When actions are enabled then it will - by default - run the 'Sanity Check' job.
#
# Testing other build configurations is controlled by the 'Secrets' configured
# in 'Settings' -> 'Secrets and Variables' -> 'Actions' -> 'Variables':
#   - DO_EXTENDED_TESTING: when this var exists and is set to a true value then
#     all build configurations are tested;
#   - CI_SKIP_SANITY: if set to a true value then most of the 'Sanity Check' job is skipped;
#   - CI_FORCE_LINUX: if set to a true value: run the 'linux' job;
#   - CI_FORCE_LINUX_I386: if set to a true value: run the 'linux-i386' job;
#   - CI_FORCE_INSTALL: if set to a true value: run the 'install' job;
#   - CI_FORCE_MACOS: if set to a true value: run the 'smoke-macos-12' job;
#   - CI_FORCE_MSVC142: if set to a true value: run the 'windows-msvc142' job;
#   - CI_FORCE_MINGW64: if set to a true value: run the 'mingw64' job;
#   - CI_FORCE_CYGWIN: if set to a true value: run the 'cygwin' job;
#   - CI_FORCE_MINITEST: if set to a true value: run the 'miniperl' job;
#   - CI_FORCE_ASAN: if set to a true value: run the 'ASAN' job;
#   - CI_FORCE_PERL_UNICODE: if set to a true value: run the 'PERL_UNICODE' job;
#   - CI_FORCE_DIST_MODULES: if set to a true value: run the 'dist-modules' job;
#
# For the purpose of this workflow:
#   - 'true value': any value that is not false
#   - 'false value':
#      * empty string
#      * string containing only spaces (i.e. '    ')
#      * string containing only zeroes (i.e. '0', '0000')
#      * string containing only spaces and zeroes (i.e. '0  0 0 0')
#
# Example: if you only want to run tests on cygwin then you can set:
#   - DO_EXTENDED_TESTING=0
#   - CI_SKIP_SANITY=1
#   - CI_FORCE_CYGWIN=1
#   - (and all other CI_FORCE_... vars to 0)
#

name: testsuite

on:
  push:
    branches:
      - "**"
    tags-ignore:
      - "*"
  pull_request:

# I don't think that we can (safely) set TEST_JOBS=2 in the global environment,
# because on Win32 the various Makefile's `test` target is actually ./harness,
# and it would (attempt to) honour the $ENV{TEST_JOBS} setting. This won't end
# nicely as unlike BSD (etc), Win32 sockets can drop data at process exit, which
# would cause missing TAP and hence spurious test failures.

env:
  PERL_SKIP_TTY_TEST: 1
  CONTINUOUS_INTEGRATION: 1

permissions:
  contents: read # to fetch code

jobs:
  #  ___           _         ___       __                    _   _
  # / __|_ __  ___| |_____  |_ _|_ _  / _|___ _ _ _ __  __ _| |_(_)___ _ _  ___
  # \__ \ '  \/ _ \ / / -_)  | || ' \|  _/ _ \ '_| '  \/ _` |  _| / _ \ ' \(_-<
  # |___/_|_|_\___/_\_\___| |___|_||_|_| \___/_| |_|_|_\__,_|\__|_\___/_||_/__/

  involved_authors_debug:
    runs-on: ubuntu-latest
    if: ( github.event.pull_request.head.repo.full_name == 'Perl/perl5' || github.repository == 'Perl/perl5' ) && github.base_ref != ''
    continue-on-error: true

    steps:
      - name: Dump GitHub context
        env:
          GITHUB_CONTEXT: ${{ toJson(github) }}
        run: echo "$GITHUB_CONTEXT"
      - uses: actions/checkout@v4
        with:
          fetch-depth: 1000
      - name: git setup
        run: |
          echo "Pull request authors"
          echo "# git merge-base origin/${BASE_REF} HEAD"
          git config diff.renameLimit 999999
          git fetch --depth=1000 origin ${BASE_REF}
        env:
          BASE_REF: ${{ github.base_ref }}
      - name: Involved authors
        run: |
          echo "Authors from origin/${BASE_REF}..${SHA}^2"
          echo "specifically: $(git rev-parse origin/${BASE_REF})..$(git rev-parse ${SHA}^2)"
          git log --pretty=format:"Author: %aN <%aE>" origin/${BASE_REF}..${SHA}^2 | sort | uniq -c
        env:
          BASE_REF: ${{ github.base_ref }}
          SHA: ${{ github.sha }}

  #  ___            _ _           ___ _           _
  # / __| __ _ _ _ (_) |_ _  _   / __| |_  ___ __| |__
  # \__ \/ _` | ' \| |  _| || | | (__| ' \/ -_) _| / /
  # |___/\__,_|_||_|_|\__|\_, |  \___|_||_\___\__|_\_\
  #                       |__/
  # ascii art small font from https://ascii.co.uk/text

  # "sanity_check" tests -Dusethreads without -DDEBUGGING
  # "linux-i386" tests -Uusethreads without -DDEBUGGING
  # All builds in the "linux" matrix test with -DDEBUGGING
  #
  # "sanity_check" sets `fetch-depth: 0` so that it does a git clone
  # with full history, and hence can run t/porting/cmp_version.t etc
  #
  # The git-related tests require full history, but we only need to run
  # them once (they aren't platform specific).  Hence leave the others
  # with the default setting (1), which performs a shallow clone. In
  # these shallow checkouts, the git related porting tests skip (or
  # rapidly pass), but they won't fail spuriously.
  #
  # TODO - Now that we do not use secrets and instead use vars for the
  # control of which tests we run (due to the way secrets are elided
  # from the output), we can simplify the shell code below.  The
  # following url includes discussion on what next steps we could take
  # to simplify the complexity of this code.
  #
  # https://github.com/Perl/perl5/pull/20845#issuecomment-1440676127
  #

  sanity_check:
    name: "Sanity: Linux -Dusethreads"
    runs-on: ubuntu-latest
    timeout-minutes: 120

    outputs:
      run_all_jobs: ${{ steps.check_extended_testing.outputs.run_all_jobs }}
      ci_force_linux: ${{ steps.ci_config.outputs.ci_force_linux }}
      ci_force_linux_i386: ${{ steps.ci_config.outputs.ci_force_linux_i386 }}
      ci_force_install: ${{ steps.ci_config.outputs.ci_force_install }}
      ci_force_macos: ${{ steps.ci_config.outputs.ci_force_macos }}
      ci_force_msvc142: ${{ steps.ci_config.outputs.ci_force_msvc142 }}
      ci_force_mingw64: ${{ steps.ci_config.outputs.ci_force_mingw64 }}
      ci_force_cygwin: ${{ steps.ci_config.outputs.ci_force_cygwin }}
      ci_force_minitest: ${{ steps.ci_config.outputs.ci_force_minitest }}
      ci_force_asan: ${{ steps.ci_config.outputs.ci_force_asan }}
      ci_force_perl_unicode: ${{ steps.ci_config.outputs.ci_force_perl_unicode }}
      ci_force_dist_modules: ${{ steps.ci_config.outputs.ci_force_dist_modules }}

    steps:
      - name: Dump GitHub context
        env:
          GITHUB_CONTEXT: ${{ toJson(github) }}
        run: echo "$GITHUB_CONTEXT"
      - name: Check what-to-do
        id: ci_config
        env:
          CI_SKIP_SANITY: ${{ vars.CI_SKIP_SANITY }}
          CI_FORCE_LINUX: ${{ vars.CI_FORCE_LINUX }}
          CI_FORCE_LINUX_I386: ${{ vars.CI_FORCE_LINUX_I386 }}
          CI_FORCE_INSTALL: ${{ vars.CI_FORCE_INSTALL }}
          CI_FORCE_MACOS: ${{ vars.CI_FORCE_MACOS }}
          CI_FORCE_MSVC142: ${{ vars.CI_FORCE_MSVC142 }}
          CI_FORCE_MINGW64: ${{ vars.CI_FORCE_MINGW64 }}
          CI_FORCE_CYGWIN: ${{ vars.CI_FORCE_CYGWIN }}
          CI_FORCE_MINITEST: ${{ vars.CI_FORCE_MINITEST }}
          CI_FORCE_ASAN: ${{ vars.CI_FORCE_ASAN }}
          CI_FORCE_PERL_UNICODE: ${{ vars.CI_FORCE_PERL_UNICODE }}
          CI_FORCE_DIST_MODULES: ${{ vars.CI_FORCE_DIST_MODULES }}
        run: |
          echo '::echo::on'
          [[ -n "${CI_SKIP_SANITY}"        ]] && [[ "${CI_SKIP_SANITY%[!0 ]*}"        != "${CI_SKIP_SANITY}"        ]] && echo "ci_skip_sanity=true" >> "$GITHUB_OUTPUT"
          [[ -n "${CI_FORCE_LINUX}"        ]] && [[ "${CI_FORCE_LINUX%[!0 ]*}"        != "${CI_FORCE_LINUX}"        ]] && echo "ci_force_linux=true" >> "$GITHUB_OUTPUT"
          [[ -n "${CI_FORCE_LINUX_I386}"   ]] && [[ "${CI_FORCE_LINUX_I386%[!0 ]*}"   != "${CI_FORCE_LINUX_I386}"   ]] && echo "ci_force_linux_i386=true" >> "$GITHUB_OUTPUT"
          [[ -n "${CI_FORCE_INSTALL}"      ]] && [[ "${CI_FORCE_INSTALL%[!0 ]*}"      != "${CI_FORCE_INSTALL}"      ]] && echo "ci_force_install=true" >> "$GITHUB_OUTPUT"
          [[ -n "${CI_FORCE_MACOS}"        ]] && [[ "${CI_FORCE_MACOS%[!0 ]*}"        != "${CI_FORCE_MACOS}"        ]] && echo "ci_force_macos=true" >> "$GITHUB_OUTPUT"
          [[ -n "${CI_FORCE_MSVC142}"      ]] && [[ "${CI_FORCE_MSVC142%[!0 ]*}"      != "${CI_FORCE_MSVC142}"      ]] && echo "ci_force_msvc142=true" >> "$GITHUB_OUTPUT"
          [[ -n "${CI_FORCE_MINGW64}"      ]] && [[ "${CI_FORCE_MINGW64%[!0 ]*}"      != "${CI_FORCE_MINGW64}"      ]] && echo "ci_force_mingw64=true" >> "$GITHUB_OUTPUT"
          [[ -n "${CI_FORCE_CYGWIN}"       ]] && [[ "${CI_FORCE_CYGWIN%[!0 ]*}"       != "${CI_FORCE_CYGWIN}"       ]] && echo "ci_force_cygwin=true" >> "$GITHUB_OUTPUT"
          [[ -n "${CI_FORCE_MINITEST}"     ]] && [[ "${CI_FORCE_MINITEST%[!0 ]*}"     != "${CI_FORCE_MINITEST}"     ]] && echo "ci_force_minitest=true" >> "$GITHUB_OUTPUT"
          [[ -n "${CI_FORCE_ASAN}"         ]] && [[ "${CI_FORCE_ASAN%[!0 ]*}"         != "${CI_FORCE_ASAN}"         ]] && echo "ci_force_asan=true" >> "$GITHUB_OUTPUT"
          [[ -n "${CI_FORCE_PERL_UNICODE}" ]] && [[ "${CI_FORCE_PERL_UNICODE%[!0 ]*}" != "${CI_FORCE_PERL_UNICODE}" ]] && echo "ci_force_perl_unicode=true" >> "$GITHUB_OUTPUT"
          [[ -n "${CI_FORCE_DIST_MODULES}" ]] && [[ "${CI_FORCE_DIST_MODULES%[!0 ]*}" != "${CI_FORCE_DIST_MODULES}" ]] && echo "ci_force_dist_modules=true" >> "$GITHUB_OUTPUT"
          echo '::echo::off'
      - name: Install System dependencies
        if: steps.ci_config.outputs.ci_skip_sanity != 'true'
        run: |
          sudo apt-get update
          sudo apt-get install -y libgdbm-dev libdb-dev
      - uses: actions/checkout@v4
        with:
          fetch-depth: 0
        if: steps.ci_config.outputs.ci_skip_sanity != 'true'
      - name: git cfg
        if: steps.ci_config.outputs.ci_skip_sanity != 'true'
        run: |
          git config diff.renameLimit 999999
      - name: Configure
        if: steps.ci_config.outputs.ci_skip_sanity != 'true'
        run: |
          ./Configure -des -Dusedevel ${CONFIGURE_ARGS} -Dprefix="$HOME/perl-blead"
        env:
          CONFIGURE_ARGS: "-Dusethreads"
      - name: Build
        if: steps.ci_config.outputs.ci_skip_sanity != 'true'
        id: build
        run: |
          make -j2 test_prep
      - name: Show Config
        if: steps.ci_config.outputs.ci_skip_sanity != 'true'
        run: |
          ./perl -Ilib -V
          ./perl -Ilib -e 'use Config; print Config::config_sh'
      - name: Run Tests (excluding t/porting)
        if: steps.ci_config.outputs.ci_skip_sanity != 'true'
        run: |
          TEST_JOBS=2 ./perl t/harness -nre='^porting/'

      # Set a variable for dependent jobs to signal if full testsuite is enabled
      - name: "Check if DO_EXTENDED_TESTING is set"
        id: check_extended_testing
        env:
          DO_EXTENDED_TESTING: ${{ vars.DO_EXTENDED_TESTING }}
          CURRENT_REPOSITORY: ${{ github.repository }}
        run: |
          if [[ "${CURRENT_REPOSITORY}" = 'Perl/perl5' ]]; then
            echo "Running all test jobs"
            echo "run_all_jobs=true" >> "$GITHUB_OUTPUT"
          elif [[ -n "${DO_EXTENDED_TESTING}" ]] && [[ "${DO_EXTENDED_TESTING%[!0 ]*}" != "${DO_EXTENDED_TESTING}" ]]; then
            echo "Running all test jobs"
            echo "run_all_jobs=true" >> "$GITHUB_OUTPUT"
          else
            echo "Skipping extended test jobs."
            echo "run_all_jobs=false" >> "$GITHUB_OUTPUT"
          fi

      - name: Run Porting Tests (t/porting)
        if: (! cancelled() && steps.ci_config.outputs.ci_skip_sanity != 'true' && steps.build.outcome == 'success')
        run: |
          TEST_JOBS=2 ./perl t/harness -re='^porting/'

  #  _ _
  # | (_)_ _ _  ___ __
  # | | | ' \ || \ \ /
  # |_|_|_||_\_,_/_\_\

  linux:
    runs-on: ubuntu-latest
    timeout-minutes: 120
    needs: sanity_check
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_linux == 'true'))

    strategy:
      fail-fast: false
      matrix:
        # exercise a variety of build options
        # threads often cause build issues
        CONFIGURE_ARGS:
          - "-Uusethreads"
          #- "-Dusethreads" # already tested above by sanity_check
          #- "-Duseshrplib -Dusesitecustomize -Duselongdouble" # tested below by install
          - "-Duseshrplib -Dusequadmath -Dusecbacktrace -Dusethreads"
          - "-Duserelocatableinc"
          - "-Dcc='clang'"
          - "-Dcc='g++'"
          - "-Accflags=-DSILENT_NO_TAINT_SUPPORT"
          - "-Accflags=-DNO_TAINT_SUPPORT"
          - "-DDEBUGGING -Accflags=-DPERL_RC_STACK"
          - "-Uusedl"

    steps:
      - name: Install System dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y libgdbm-dev libdb-dev
      - uses: actions/checkout@v4
      - name: git cfg
        run: |
          git config diff.renameLimit 999999
      - name: Configure
        run: |
          ./Configure -des -Dusedevel ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead" -DDEBUGGING
      - name: Build
        run: |
          MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2 test_prep
      - name: Show Config
        run: |
          LD_LIBRARY_PATH=`pwd` ./perl -Ilib -V
          LD_LIBRARY_PATH=`pwd` ./perl -Ilib -e 'use Config; print Config::config_sh'
      - name: Run Tests
        run: |
          LD_LIBRARY_PATH=`pwd` MALLOC_PERTURB_=254 MALLOC_CHECK_=3 TEST_JOBS=2 ./perl t/harness
      - name: git clean
        run: |
          git clean -dxf
      - name: manicheck
        run: |
          perl Porting/manicheck --exitstatus

  #  _ _                       _ _____  ___   __
  # | (_)_ __  _   ___  __    (_)___ / ( _ ) / /_
  # | | | '_ \| | | \ \/ /____| | |_ \ / _ \| '_ \
  # | | | | | | |_| |>  <_____| |___) | (_) | (_) |
  # |_|_|_| |_|\__,_/_/\_\    |_|____/ \___/ \___/

  linux-i386:
    name: "linux i386/ubuntu"
    runs-on: ubuntu-latest
    timeout-minutes: 120
    needs: sanity_check
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_linux_i386 == 'true'))

    # https://hub.docker.com/r/i386/ubuntu/
    container:
      image: i386/ubuntu:latest

    strategy:
      fail-fast: false
      matrix:
        CONFIGURE_ARGS:
          - "-Dusedevel"

    steps:
      - name: Install System dependencies
        run: |
          apt-get update
          apt-get install -y build-essential git-core libgdbm-dev libdb-dev
      # actions/checkout@v2 and higher don't work in a i386 container:
      # the GitHub runner uses `node` that is installed on the host inside the container.
      # The host is (likely) running x86_64 and using a binary build for x86_64 inside a
      # i386 container just doesn't work.
      # Upstream reports:
      # - https://github.com/actions/checkout/issues/334#issuecomment-1241306390
      # - https://github.com/actions/runner/issues/2115
      #
      # actions/checkout@v1 does work inside a container but that doesn't work
      # so well with a shallow clone (`fetch-depth: 1`). It contains a race condition
      # and makes it impossible to re-run an older job.
      # Upstream report:
      # - https://github.com/actions/runner/issues/2357
      - name: Clone repo
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
        run: |
          git config --global --add safe.directory "$GITHUB_WORKSPACE"
          git init
          git remote add origin "https://$GITHUB_ACTOR:$GITHUB_TOKEN@github.com/$GITHUB_REPOSITORY"
          git config --local gc.auto 0
          git fetch origin --depth=1 "$GITHUB_SHA"
          git checkout "$GITHUB_SHA"
      - name: git cfg
        run: |
          git config diff.renameLimit 999999
      - name: Configure
        run: |
          ./Configure -des -Dusedevel ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead"
      - name: Build
        run: |
          MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2
      - name: Show Config
        run: |
          LD_LIBRARY_PATH=`pwd` ./perl -Ilib -V
          LD_LIBRARY_PATH=`pwd` ./perl -Ilib -e 'use Config; print Config::config_sh'
      # Leaving this as `make test` so that we test the `test` target on regular
      # Linux.
      # linux-i386 is just one job (not a matrix)
      - name: Run Tests
        run: |
          MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2 test

  #                  _          _           _        _ _
  #  _ __ ___   __ _| | _____  (_)_ __  ___| |_ __ _| | |
  # | '_ ` _ \ / _` | |/ / _ \ | | '_ \/ __| __/ _` | | |
  # | | | | | | (_| |   <  __/ | | | | \__ \ || (_| | | |
  # |_| |_| |_|\__,_|_|\_\___| |_|_| |_|___/\__\__,_|_|_|

  install:
    runs-on: ubuntu-latest
    timeout-minutes: 120
    needs: sanity_check
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_install == 'true'))

    steps:
      - name: Install System dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y libgdbm-dev libdb-dev
      - uses: actions/checkout@v4
      - name: git cfg
        run: |
          git config diff.renameLimit 999999
      - name: Configure
        run: |
          ./Configure -des -Dusedevel -Duseshrplib -Dusesitecustomize -Duselongdouble -Dprefix="$HOME/perl-blead" -DDEBUGGING
      - name: Build
        run: |
          MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2
      - name: Show Config
        run: |
          LD_LIBRARY_PATH=`pwd` ./perl -Ilib -V
          LD_LIBRARY_PATH=`pwd` ./perl -Ilib -e 'use Config; print Config::config_sh'
      - name: Run Tests
        run: |
          MALLOC_PERTURB_=254 MALLOC_CHECK_=3 TEST_JOBS=2 make -j2 test_harness
      - name: Install
        run: |
          MALLOC_PERTURB_=254 MALLOC_CHECK_=3 TEST_JOBS=2 make -j2 install
      # This will only pass if libperl.so and Config.pm are correctly installed:
      - name: Show Install
        run: |
          ./perl -V
      # This can't run in parallel
      - name: distclean
        run: |
          MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make distclean
      - name: manicheck
        run: |
          perl Porting/manicheck --exitstatus

  #                 ___  ___
  #  _ __  __ _ __ / _ \/ __|
  # | '  \/ _` / _| (_) \__ \
  # |_|_|_\__,_\__|\___/|___/

  smoke-macos-12:
    name: "macOS (Monterey) 12"
    runs-on: macos-12
    timeout-minutes: 120
    needs: sanity_check
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_macos == 'true'))

    strategy:
      fail-fast: false
      matrix:
        CONFIGURE_ARGS:
          - "-Uusethreads"
          - "-Duseithreads -Duseshrplib"

    steps:
      - uses: actions/checkout@v4
      - name: Configure
        run: |
          sh ./Configure -des -Dusedevel ${{ matrix.CONFIGURE_ARGS }}
      - name: Build
        run: |
          make -j2 test_prep
      - name: Show Config
        run: |
          ./perl -Ilib -V
          ./perl -Ilib -e 'use Config; print Config::config_sh'
      - name: Run Tests
        run: |
          TEST_JOBS=2 ./perl t/harness

  #         _         _
  # __ __ _(_)_ _  __| |_____ __ _____
  # \ V  V / | ' \/ _` / _ \ V  V (_-<
  #  \_/\_/|_|_||_\__,_\___/\_/\_//__/

  windows-msvc142:
    name: "Windows msvc142"
    runs-on: windows-2019
    timeout-minutes: 120
    needs: sanity_check
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_msvc142 == 'true'))

    steps:
      - run: git config --global core.autocrlf false
      - uses: actions/checkout@v4
      #- name: Install clcache
      #  shell: cmd
      #  run: |
      #    curl -L https://github.com/frerich/clcache/releases/download/v4.2.0/clcache.4.2.0.nupkg --output clcache.4.2.0.nupkg
      #    choco install clcache --source=.
      #- name: find home directory
      #  shell: cmd
      #  run: |
      #    set
      #- name: C compiler cache
      #  id: clcache
      #  uses: actions/cache@v1
      #  with:
      #    path: $HOME\clcache
      #    key: ${{ runner.os }}-x64
      #- name: Set up Perl build environment
      #  # pushd "C:\Program Files (x86)\Microsoft Visual Studio\Installer\"
      #  # for /f "delims=" %%x in ('.\vswhere.exe -latest -property InstallationPath') do set VSPATH=%%x
      #  # popd
      #  # call "%VSPATH%\VC\Auxiliary\Build\vcvarsall.bat" x64
      #  #run: |
      - name: Build
        shell: cmd
        run: |
          call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
          cd win32
          nmake CCTYPE=MSVC142 CFG=Debug
      - name: Show Config
        shell: cmd
        run: |
          .\perl.exe -V
          .\perl.exe -e "use Config; print Config::config_sh"
      - name: Run Tests
        shell: cmd
        run: |
          call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
          cd win32
          nmake CCTYPE=MSVC142 CFG=Debug test

  #            _                       __   _  _
  #  _ __ ___ (_)_ __   __ ___      __/ /_ | || |
  # | '_ ` _ \| | '_ \ / _` \ \ /\ / / '_ \| || |_
  # | | | | | | | | | | (_| |\ V  V /| (_) |__   _|
  # |_| |_| |_|_|_| |_|\__, | \_/\_/  \___/   |_|
  #                    |___/

  mingw64:
    name: "Windows mingw64"
    runs-on: windows-2019
    timeout-minutes: 120
    needs: sanity_check
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_mingw64 == 'true'))

    steps:
      - run: git config --global core.autocrlf false
      - uses: actions/checkout@v4
      - name: Install mingw-64
        run: |
          mkdir C:\perl_ci && cd C:\perl_ci
          curl -L https://github.com/brechtsanders/winlibs_mingw/releases/download/13.1.0-16.0.5-11.0.0-ucrt-r5/winlibs-x86_64-posix-seh-gcc-13.1.0-mingw-w64ucrt-11.0.0-r5.zip -o mingw.zip
          $expected_hash = '418E8A0175640E617EC6F6639BCA8D3AEDDB6A108391EAF312D1351D19375958'
          $file_hash = (Get-FileHash mingw.zip -Algorithm SHA256).Hash
          if ($file_hash -ne $expected_hash) {
            throw "Wrong hash. Got ${file_hash}, expected ${expected_hash}"
          }
          tar -xf mingw.zip && rm mingw.zip
          copy mingw64\bin\mingw32-make.exe mingw64\bin\gmake.exe
          echo 'C:\perl_ci\mingw64\bin' >> $env:GITHUB_PATH
      - name: Host perl -V
        run: |
          perl -V
      - name: gcc --version
        run: gcc --version
      - name: Build
        shell: cmd
        run: |
          cd win32
          gmake CCHOME=C:\perl_ci\mingw64 CFG=Debug -f GNUMakefile -j2
      - name: Show Config
        shell: cmd
        run: |
          .\perl.exe -V
          .\perl.exe -e "use Config; print Config::config_sh"
      - name: Run Tests
        shell: cmd
        run: |
          cd win32
          set HARNESS_OPTIONS=j2
          gmake CCHOME=C:\perl_ci\mingw64 CFG=Debug -f GNUMakefile test

  #                            _
  #   ___ _   _  __ ___      _(_)_ __
  #  / __| | | |/ _` \ \ /\ / / | '_ \
  # | (__| |_| | (_| |\ V  V /| | | | |
  #  \___|\__, |\__, | \_/\_/ |_|_| |_|
  #       |___/ |___/

  cygwin:
    name: "cygwin"
    runs-on: windows-2019
    timeout-minutes: 120
    needs: sanity_check
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_cygwin == 'true'))

    steps:
      # we use Cygwin git, so no need to configure git here.

      - name: Set up Cygwin
        uses: cygwin/cygwin-install-action@v3
        with:
          packages: >
              cygwin-devel gcc-core gcc-g++ make w32api-headers binutils libtool
              git ccache libgdbm-devel libdb-devel
          install-dir: ${{ github.workspace }}\cygwin
      - name: Check out using Cygwin git, to ensure correct file permissions
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
          PATH: /usr/bin:/bin
          SHELLOPTS: igncr
        shell: sh
        run: |
          git config --global core.autocrlf false
          mkdir -p ~
          cd ~
          git init work
          cd work
          git remote add origin "https://$GITHUB_ACTOR:$GITHUB_TOKEN@github.com/$GITHUB_REPOSITORY"
          git config --local gc.auto 0
          git fetch origin --depth=1 "$GITHUB_SHA"
          git checkout "$GITHUB_SHA"
      - name: Configure
        shell: sh
        env:
          PATH: /usr/bin:/bin
          SHELLOPTS: igncr
        run: |
          cd ~/work
          set +e
          ./Configure -des -Dusedevel -Doptimize=-g -DDEBUGGING || exit 1
      - name: Build
        shell: sh
        env:
          PATH: /usr/bin:/bin
          SHELLOPTS: igncr
        run: |
          cd ~/work
          make -j2 test_prep
      - name: Show Config
        shell: sh
        env:
          PATH: /usr/bin:/bin
          SHELLOPTS: igncr
        run: |
          cd ~/work
          ./perl -Ilib -V
          ./perl -Ilib -e 'use Config; print Config::config_sh'
      - name: Run Tests
        shell: sh
        env:
          PATH: /usr/bin:/bin
          SHELLOPTS: igncr
        # Descend far enough down the cygwin yak warren, and one discovers that
        # hints/cygwin.sh sets ldlibpthname=PATH
        # Meaning that the Makefile variable LDLIBPTH is "PATH=..."
        # Meaning that the command to invoke ./runtests is PATH=... ./perl.exe
        # *Not* LD_LIBRARY_PATH or anything conventionally unix-like
        #
        # Cygwin is the slowest CI test. Breaking the abstractions described
        # above/committing this DRY violation means that we avoid needing to
        # `make -j2 test` to invoke t/TEST, and avoiding that likely saves us
        # about 40 seconds, which is nearly 1% of the total wallclock time for
        # complete all CI runs.
        run: |
          cd ~/work
          PATH=`pwd`:.:$PATH TEST_JOBS=2 ./perl.exe t/harness

  #            _       _ _            _
  #  _ __ ___ (_)_ __ (_) |_ ___  ___| |_
  # | '_ ` _ \| | '_ \| | __/ _ \/ __| __|
  # | | | | | | | | | | | ||  __/\__ \ |_
  # |_| |_| |_|_|_| |_|_|\__\___||___/\__|

  miniperl:
    name: "minitest"
    runs-on: ubuntu-latest
    timeout-minutes: 120
    needs: sanity_check
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_minitest == 'true'))

    outputs:
      run_all_jobs: ${{ steps.check_extended_testing.outputs.run_all_jobs }}

    steps:
      - name: Dump GitHub context
        env:
          GITHUB_CONTEXT: ${{ toJson(github) }}
        run: echo "$GITHUB_CONTEXT"
      - name: Install System dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y libgdbm-dev libdb-dev
      - uses: actions/checkout@v4
      - name: git cfg
        run: |
          git config diff.renameLimit 999999
      - name: manicheck
        run: |
          perl Porting/manicheck --exitstatus
      - name: Configure
        run: |
          ./Configure -des -Dusedevel -Dprefix="$HOME/perl-blead"
      - name: Build
        run: |
          make -j2 minitest_prep
      - name: Show Config
        run: |
          ./miniperl -Ilib -V
          ./miniperl -Ilib -e 'use Config; print Config::config_sh'
      - name: Run Tests
        run: |
          make minitest_notty

  #     _    ____    _    _   _
  #    / \  / ___|  / \  | \ | |
  #   / _ \ \___ \ / _ \ |  \| |
  #  / ___ \ ___) / ___ \| |\  |
  # /_/   \_\____/_/   \_\_| \_|

  # Life is pain, highness. Anyone who says differently is selling something.

  ASAN:
    name: "ASAN"
    runs-on: ubuntu-latest
    timeout-minutes: 120
    needs: sanity_check
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_asan == 'true'))

    strategy:
      matrix:
        # -DPURIFY disables arenas and mallocs everything individually. With
        # ASAN or similar it's the real torture test. However, we also need to
        # test that the arena code doesn't have any goofs.
        CONFIGURE_ARGS:
          - "-Accflags=-DPURIFY"
          - "-DDEBUGGING"
          - "-Dusethreads"

    steps:
      - name: Install System dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y libgdbm-dev libdb-dev
      - uses: actions/checkout@v4
      - name: git cfg
        run: |
          git config diff.renameLimit 999999
      - name: Configure
        run: |
          ./Configure -des -Dusedevel -Dcc="clang -fsanitize=address" -Dld="clang -fsanitize=address" ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead"
      - name: Build
        run: |
          PERL_DESTRUCT_LEVEL=2 make -j2 test_prep
      - name: Show Config
        run: |
          ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -V
          ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -e 'use Config; print Config::config_sh'
      - name: Run Tests
        # LeakSanitizer is disabled because it randomly crashes, see [gh #19189]
        run: |
          ASAN_OPTIONS=detect_leaks=0 PERL_DESTRUCT_LEVEL=2 TEST_JOBS=2 ./perl t/harness

  #  ____  _____ ____  _        _   _ _   _ ___ ____ ___  ____  _____
  # |  _ \| ____|  _ \| |      | | | | \ | |_ _/ ___/ _ \|  _ \| ____|
  # | |_) |  _| | |_) | |      | | | |  \| || | |  | | | | | | |  _|
  # |  __/| |___|  _ <| |___   | |_| | |\  || | |__| |_| | |_| | |___
  # |_|   |_____|_| \_\_____|___\___/|_| \_|___\____\___/|____/|_____|
  #                        |_____|

  # To the pain!

  PERL_UNICODE:
    name: "PERL_UNICODE"
    runs-on: ubuntu-latest
    timeout-minutes: 120
    needs: sanity_check
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_perl_unicode == 'true'))

    strategy:
      matrix:
        # There are many many combinations we *could* test. These two are likely
        # to give the best overview - "basic sanity" and "everything maxed out"
        CONFIGURE_ARGS:
          - "-Uusethreads"
          - "-Dusethreads -Accflags=-DPURIFY -Dcc='gcc -fsanitize=address' -Dld='gcc -fsanitize=address'"

    steps:
      - name: Install System dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y libgdbm-dev libdb-dev
      - uses: actions/checkout@v4
      - name: git cfg
        run: |
          git config diff.renameLimit 999999
      - name: Show Locales
        run: locale -a
      - name: Configure
        run: |
          ./Configure -des -Dusedevel  ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead"
      - name: Build
        run: |
          LC_ALL=en_US.UTF-8 PERL_UNICODE="" PERL_DESTRUCT_LEVEL=2 make -j2 test_prep
      - name: Show Config
        run: |
          ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -V
          ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -e 'use Config; print Config::config_sh'
      - name: Run Tests
        # LeakSanitizer is disabled because it randomly crashes, see [gh #19189]
        run: |
          ASAN_OPTIONS=detect_leaks=0 PERL_DESTRUCT_LEVEL=2 LC_ALL=en_US.UTF-8 PERL_UNICODE="" TEST_JOBS=2 ./perl t/harness

  #      _ _     _                            _       _
  #   __| (_)___| |_      _ __ ___   ___   __| |_   _| | ___  ___
  #  / _` | / __| __|____| '_ ` _ \ / _ \ / _` | | | | |/ _ \/ __|
  # | (_| | \__ \ ||_____| | | | | | (_) | (_| | |_| | |  __/\__ \
  #  \__,_|_|___/\__|    |_| |_| |_|\___/ \__,_|\__,_|_|\___||___/

  dist-modules:
    name: dist-modules ${{ matrix.perl-version }} on ${{ matrix.os }}
    needs: sanity_check
    runs-on: ${{ matrix.os }}
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_dist_modules == 'true'))

    env:
      # some plugins still needs this to run their tests...
      # these don't really matter, but might later
      PERL_USE_UNSAFE_INC: 0
      AUTHOR_TESTING: 1
      AUTOMATED_TESTING: 1
      RELEASE_TESTING: 1
      NO_NETWORK_TESTING: 1

    strategy:
      fail-fast: false
      matrix:
        os: [ "ubuntu-latest", "windows-latest" ]
        perl-version:
          - '5.38'
          - '5.24'
          - '5.10'
          - '5.8'
        multi-thread: [ true, false ]

    steps:
      - uses: actions/checkout@v4
      - name: Set up perl
        uses: shogo82148/actions-setup-perl@v1.30.0
        with:
          perl-version: ${{ matrix.perl-version }}
          multi-thread: ${{ matrix.multi-thread }}
          install-modules:
            ExtUtils::MakeMaker
            Scalar::Util
            Socket
            Perl::OSType
      - name: perl -V
        run: perl -V
      - name: Build and test dist modules
        run:
          perl Porting/test-dist-modules.pl -continue

  dist-modules-sys-macos:
    name: "Test dist/ modules on MacOS system perl"
    needs: sanity_check
    runs-on: macos-12
    if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_dist_modules == 'true'))

    env:
      # some plugins still needs this to run their tests...
      # these don't really matter, but might later
      PERL_USE_UNSAFE_INC: 0
      AUTHOR_TESTING: 1
      AUTOMATED_TESTING: 1
      RELEASE_TESTING: 1
      NO_NETWORK_TESTING: 1

    strategy:
      fail-fast: false

    steps:
      - uses: actions/checkout@v4
      - name: perl -V
        run: /usr/bin/perl -V
      - name: Build and test dist modules
        run:
          /usr/bin/perl Porting/test-dist-modules.pl -continue