From e69eb227429d2939c6c48c9c776181995cbd0df0 Mon Sep 17 00:00:00 2001
From: Timo Kokkonen <tjko@iki.fi>
Date: Mon, 15 Jul 2024 20:37:05 -0700
Subject: [PATCH] Change default LRA intepretation to be LOW=1000 rpm and
 HIGH=0 rpm (rotor locked). (#90)

---
 commands.md  | 16 ++++++++--------
 src/config.c |  4 ++--
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/commands.md b/commands.md
index 0b79eb7..db41976 100644
--- a/commands.md
+++ b/commands.md
@@ -416,14 +416,14 @@ Locked Rotor (Alarm)|LRA,low_rpm,high_rpm|Parameters indicate mapping from LRA t
 
 Default: TACHO  (fan sends standard tachometer pulses to indicate rotation speed)
 
-Example: Fan is not sending tachometer signal but Locked Rotor Alam signal (LRA) on tachometer pin (we map LOW signal to mean 0 RPM and HIGH signal to mean 2000 RPM)
+Example: Fan is not sending tachometer signal but Locked Rotor Alam signal (LRA) on tachometer pin (we map HIGH signal to mean 0 RPM and LOW signal to mean 2000 RPM)
 ```
-CONF:FAN1:RPMMODE LRA,0,2000
+CONF:FAN1:RPMMODE LRA,2000,0
 ```
 
-Example: Fan is sending Locked Rotor (Alarm) signal (LRA), where polarity in reversed (HIGH signal indicates lockup/failure):
+Example: Fan is sending Locked Rotor (Alarm) signal (LRA), where polarity in reversed (LOW signal indicates lockup/failure):
 ```
-CONF:FAN2:RPMMODE LRA,2000,0
+CONF:FAN2:RPMMODE LRA,0,2000
 ```
 
 #### CONFigure:FANx:RPMMOde?
@@ -676,14 +676,14 @@ Locked Rotor (Alarm)|LRA,treshold_rpm,locked_signal_level|Send Locked Rotor Alar
 
 Default: TACHO  (standard tachometer pulses to indicate rotation speed)
 
-Example: Send 'LOW' Locked Rotor (Alarm) signal (when RPM drops below 200 RPM)
+Example: Send 'HIGH' Locked Rotor (Alarm) signal (when RPM drops below 200 RPM)
 ```
-CONF:MBFAN1:RPMMODE LRA,200,LOW
+CONF:MBFAN1:RPMMODE LRA,200,HIGH
 ```
 
-Example: Send 'HIGH' Locked Rotor (Alarm) signal (when RPM drops below 500 RPM)
+Example: Send 'LOW' Locked Rotor (Alarm) signal (when RPM drops below 500 RPM)
 ```
-CONF:MBFAN2:RPMMODE LRA,500,HIGH
+CONF:MBFAN2:RPMMODE LRA,500,LOW
 ```
 
 #### CONFigure:FANx:RPMMOde?
diff --git a/src/config.c b/src/config.c
index 61c1b46..4c0afa6 100644
--- a/src/config.c
+++ b/src/config.c
@@ -464,8 +464,8 @@ void clear_config(struct fanpico_config *cfg)
 		f->s_id = 0;
 		f->map.points = 0;
 		f->rpm_mode = RMODE_TACHO;
-		f->lra_low = 0;
-		f->lra_high = 1000;
+		f->lra_low = 1000;
+		f->lra_high = 0;
 		f->rpm_factor = 2;
 		f->filter = FILTER_NONE;
 		f->filter_ctx = NULL;