decoded_v3: nosync <= Not Ok

[JLFN]

hey
Iam running Raspberry pie 2 B , using CC1101 with the pinouts from wiringpi and i get this error.

[email protected] start /home/pi/RF_InterTechno
node server.js

Logger - dir_base_path: /home/pi/RF_InterTechno/src/utils
Packet Analyzer - MQTT Topic: undefined
Start RFSwitch ...
Starting app with cmd: /home/pi/RFSwitch/RFSwitch [] in dir: /home/pi/RFSwitch/
After App Starting -> PID: 8280
decoded_v3: nosync <= Not Ok
decoded_v3: nosync <= Not Ok

CC1101<->Raspi

Vdd    -    3.3V (P1-01)
SI     -    MOSI (P1-19)
SO     -    MISO (P1-21)
CS     -    SS   (P1-24)
SCLK   -    SCK  (P1-23)
GDO2   -    GPIO (P1-22)
GDO0   -    not used in this demo
GND    -    P1-25

My CC1101 works i tried it with CC debugger with SmartRF studio and also wiringpi.

pi@raspberrypi:~/CC1101 $sudo ./TX_Demo -v -a1 -r3 -i1000 -t5 -c1 -f434 -m100
 Raspberry CC1101 SPI Library test
> Init CC1100...
> Partnumber: 0x00
> Version   : 0x14
> ...done!
> Mode: 3
> Frequency: 2
> Channel: 1
> My_Addr: 1
> Config Register:
> 0x07 0x2E 0x80 0x07 0x57 0x43 0x3E 0x0E 0x45 0x01
> 0x01 0x08 0x00 0x10 0xB0 0x71 0x5B 0xF8 0x13 0xA0
> 0xF8 0x47 0x07 0x0C 0x18 0x1D 0x1C 0xC7 0x00 0xB2
> 0x02 0x26 0x09 0xB6 0x04 0xEC 0x2B 0x19 0x11 0x51
> 0x00 0x59 0x7F 0x3C 0x81 0x3F 0x0B
> PaTable:
> 0x6C 0x1C 0x06 0x3A 0x51 0x85 0xC8 0xC0
> TX_FIFO: 0x06 0x03 0x01 0x00 0x00 0x03 0xE8
>  #:0x01
> TX_FIFO: 0x06 0x03 0x01 0x00 0x00 0x03 0xE8
>  #:0x02
> TX_FIFO: 0x06 0x03 0x01 0x00 0x00 0x03 0xE8
>  #:0x03
> TX_FIFO: 0x06 0x03 0x01 0x00 0x00 0x03 0xE8
>  #:0x04
> TX_FIFO: 0x06 0x03 0x01 0x00 0x00 0x03 0xE8
>  #:0x05
> TX_FIFO: 0x06 0x03 0x01 0x00 0x00 0x03 0xE8
>  #:0x06