From d94e04f401fac9536960f90c399b894eabacf12c Mon Sep 17 00:00:00 2001 From: TheYOSH Date: Mon, 25 Sep 2023 22:18:06 +0200 Subject: [PATCH] Update documentation (2) --- docs/_tabs/hardware.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/_tabs/hardware.md b/docs/_tabs/hardware.md index 92047403b..bca855a71 100644 --- a/docs/_tabs/hardware.md +++ b/docs/_tabs/hardware.md @@ -15,7 +15,7 @@ All the hardware that is connected through GPIO pins needs to use the **physical ### Power saving -Some GPIO sensors can benefit from using power saving. A good example is the analog/digital moisture sensor [YTXX]({% link _hardware/ytxx-digital_sensor.md %}) +Some GPIO sensors can benefit from using power saving. A good example is the analog/digital moisture sensor [YTXX]({% link _hardware/ylxx-digital_sensor.md %}) Power management works that you connect the red (power) wire of the sensor to a GPIO pin, which will be put to high so that the sensor get powered. After 1.0 sec a measurement is taken, and afterwards the power to the sensor is shutdown.