diff --git a/TH3DUF_R2/Configuration.h b/TH3DUF_R2/Configuration.h
index 112d6fb..b0186bc 100644
--- a/TH3DUF_R2/Configuration.h
+++ b/TH3DUF_R2/Configuration.h
@@ -427,6 +427,15 @@
 //#define GEE_A10_V2_OEM
 //#define CUSTOM_PROBE
 
+//===========================================================================
+// Geeetech A10M Options - Select 'Arduino Mega 2560' from Tools > Board
+//===========================================================================
+//#define GEEETECH_A10M
+
+// EZABL Probe Mounts - uses the same mounts as the Geetech A10 V2
+//#define GEE_A10_V2_OEM
+//#define CUSTOM_PROBE
+
 //===========================================================================
 // Geeetech A20 Options - Select 'Arduino Mega 2560' from Tools > Board
 //===========================================================================
diff --git a/TH3DUF_R2/Configuration_backend.h b/TH3DUF_R2/Configuration_backend.h
index c481e43..c8c95a5 100644
--- a/TH3DUF_R2/Configuration_backend.h
+++ b/TH3DUF_R2/Configuration_backend.h
@@ -846,7 +846,7 @@
 #endif
 
 //Geeetech A10/A10M/A20/A20M Settings
-#if ENABLED(GEEETECH_A10_V1) || ENABLED(GEEETECH_A10_V2) || ENABLED(GEEETECH_A20) || ENABLED(GEEETECH_A20M)
+#if ENABLED(GEEETECH_A10_V1) || ENABLED(GEEETECH_A10_V2) || ENABLED(GEEETECH_A20) || ENABLED(GEEETECH_A20M) || ENABLED(GEEETECH_A10M)
   #define GEEETECH_BED_TEMPSENSOR
   
   #if ENABLED(GEEETECH_A10_V1)
@@ -855,13 +855,13 @@
   	#endif
   #endif
   
-  #if ENABLED(GEEETECH_A10_V2) || ENABLED(GEEETECH_A20) || ENABLED(GEEETECH_A20M)
+  #if ENABLED(GEEETECH_A10_V2) || ENABLED(GEEETECH_A20) || ENABLED(GEEETECH_A20M) || ENABLED(GEEETECH_A10M)
 	  #ifndef MOTHERBOARD
   		#define MOTHERBOARD BOARD_GT2560_V3_0
   	#endif
   #endif
 
-  #if ENABLED(GEEETECH_A10_V1) || ENABLED(GEEETECH_A10_V2)
+  #if ENABLED(GEEETECH_A10_V1) || ENABLED(GEEETECH_A10_V2) || ENABLED(GEEETECH_A10M)
 	  #define REPRAP_DISCOUNT_SMART_CONTROLLER
 	  #define LCD2004
 	  #define X_BED_SIZE 220
@@ -892,7 +892,7 @@
     #if ENABLED(CUSTOM_ESTEPS)
       #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, CUSTOM_ESTEPS_VALUE }
     #else
-      #if ENABLED(GEEETECH_A20M)
+      #if ENABLED(GEEETECH_A20M) || ENABLED(GEEETECH_A10M)
         #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 340 }
       #else
         #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
@@ -916,13 +916,13 @@
   #define INVERT_Y_DIR true
   #define INVERT_Z_DIR false
   
-  #if ENABLED(GEEETECH_A20M)
+  #if ENABLED(GEEETECH_A20M) || ENABLED(GEEETECH_A10M)
     #define DUAL_EXTRUDERS
     #define INVERT_E1_DIR false
     #define SINGLENOZZLE
   #endif
   
-  #if ENABLED(TITAN_EXTRUDER) || ENABLED(GEEETECH_A20M)
+  #if ENABLED(TITAN_EXTRUDER) || ENABLED(GEEETECH_A20M) || ENABLED(GEEETECH_A10M)
     #define INVERT_E0_DIR false
   #else
     #define INVERT_E0_DIR true
@@ -2109,7 +2109,7 @@
 
 #define SERIAL_PORT 0
 
-#if ENABLED(CR10SDUALEBOARD) || ENABLED(TIM_AM8) || (ENABLED(MKS_PRINTER) && ENABLED(DUAL_EXTRUDER_SINGLE_HOTEND)) || (ENABLED(MKS_PRINTER) && ENABLED(DUAL_HOTEND_DUAL_NOZZLES)) || ENABLED(GEEETECH_A20M)
+#if ENABLED(CR10SDUALEBOARD) || ENABLED(TIM_AM8) || (ENABLED(MKS_PRINTER) && ENABLED(DUAL_EXTRUDER_SINGLE_HOTEND)) || (ENABLED(MKS_PRINTER) && ENABLED(DUAL_HOTEND_DUAL_NOZZLES)) || ENABLED(GEEETECH_A20M) || ENABLED(GEEETECH_A10M)
   #define EXTRUDERS 2
 #else
   #define EXTRUDERS 1
@@ -2435,7 +2435,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(EZOUT_ENABLE) || ENABLED(EZOUTV2_ENABLE) || (ENABLED(CR10S) && DISABLED(CR10S_NOFILAMENTSENSOR)) || (ENABLED(CR10S_MINI) && DISABLED(CR10S_NOFILAMENTSENSOR))  || (ENABLED(CR10S_S4) && DISABLED(CR10S_NOFILAMENTSENSOR)) || (ENABLED(CR10S_S5) && DISABLED(CR10S_NOFILAMENTSENSOR)) || ENABLED(ALFAWISE_U10) || ENABLED(ADIM_GANTRY_I3_PLUS) || ENABLED(ENDER4_FIL) || ENABLED(COPYMASTER3D_300) || ENABLED(GEEETECH_A10_V2) || ENABLED(GEEETECH_A20) || ENABLED(GEEETECH_A20M)
+#if ENABLED(EZOUT_ENABLE) || ENABLED(EZOUTV2_ENABLE) || (ENABLED(CR10S) && DISABLED(CR10S_NOFILAMENTSENSOR)) || (ENABLED(CR10S_MINI) && DISABLED(CR10S_NOFILAMENTSENSOR))  || (ENABLED(CR10S_S4) && DISABLED(CR10S_NOFILAMENTSENSOR)) || (ENABLED(CR10S_S5) && DISABLED(CR10S_NOFILAMENTSENSOR)) || ENABLED(ALFAWISE_U10) || ENABLED(ADIM_GANTRY_I3_PLUS) || ENABLED(ENDER4_FIL) || ENABLED(COPYMASTER3D_300) || ENABLED(GEEETECH_A10_V2) || ENABLED(GEEETECH_A20) || ENABLED(GEEETECH_A20M) || ENABLED(GEEETECH_A10M)
   #define FILAMENT_RUNOUT_SENSOR
   #if ENABLED(FILAMENT_RUNOUT_SENSOR)
     #if ENABLED(EZOUT_ENABLE) || ENABLED(EZOUTV2_ENABLE) || ENABLED(ADIM_GANTRY_I3_PLUS)
diff --git a/TH3DUF_R2/pins_GT2560_V3.0.h b/TH3DUF_R2/pins_GT2560_V3.0.h
index e559ad0..65d1d18 100644
--- a/TH3DUF_R2/pins_GT2560_V3.0.h
+++ b/TH3DUF_R2/pins_GT2560_V3.0.h
@@ -123,7 +123,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(GEEETECH_A10_V2)
+#if ENABLED(GEEETECH_A10_V2) || ENABLED(GEEETECH_A10M)
   #define BEEPER_PIN         18
 
   #define LCD_PINS_RS        20